Upload Button Icon Add office photos
Engaged Employer

i

This company page is being actively managed by Kent plc Team. If you also belong to the team, you can get access from here

Kent plc Verified Tick

Compare button icon Compare button icon Compare

Filter interviews by

Clear (1)

Kent plc Project Engineer Interview Questions and Answers

Updated 29 Apr 2024

Kent plc Project Engineer Interview Experiences

1 interview found

Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - One-on-one 

(1 Question)

  • Q1. Behavioral and management related

Interview questions from similar companies

Interview Questionnaire 

2 Questions

  • Q1. What's the function of wire harness.
  • Ans. 

    A wire harness is a collection of wires, cables, and connectors that transmit electrical signals and power between different components in a system.

    • Wire harnesses provide a neat and organized way to route and protect wires in a system.

    • They ensure proper connectivity and prevent wire damage or short circuits.

    • Wire harnesses simplify troubleshooting and maintenance by allowing easy identification and replacement of faulty...

  • Answered by AI
  • Q2. What is the function of sputtering.
  • Ans. 

    Sputtering is a process used in manufacturing to deposit thin films of material onto a surface.

    • Sputtering is a physical vapor deposition technique.

    • It involves bombarding a target material with high-energy ions or atoms.

    • This bombardment dislodges atoms from the target material, which then deposit onto a substrate.

    • Sputtering is commonly used in the production of semiconductor devices, solar cells, and thin film coatings.

    • ...

  • Answered by AI

Interview Questionnaire 

1 Question

  • Q1. All technical questions raised

I applied via Campus Placement and was interviewed before Apr 2019. There was 1 interview round.

Interview Questionnaire 

4 Questions

  • Q1. What is your key achievement ? Either your study or professional
  • Q2. What you think about company ?
  • Q3. Where you see yourself in company ?
  • Q4. Why we select you?

Interview Preparation Tips

Interview preparation tips for other job seekers - Don't panic or hesitate or stress
Opportunities never ends

I applied via Approached by Company and was interviewed before Feb 2021. There were 3 interview rounds.

Round 1 - Technical 

(1 Question)

  • Q1. PLC, VFD, sensors, robot knowledge, Any language like C++, Python is additional advantage, mobile industry knowledge could also provide advantage
Round 2 - Technical 

(1 Question)

  • Q1. About yourself followed by one more technical round basically asking technical part from previous company
Round 3 - HR 

(3 Questions)

  • Q1. What are your salary expectations?
  • Q2. Share details of your previous job.
  • Q3. Tell me about yourself.

Interview Preparation Tips

Interview preparation tips for other job seekers - As a maintenance engineer if you are from mobile industry you will definitely get priority, other than this they require PLC and robotic knowlegde acquired professional for the testing equipment which are generally using drivers, motors, plc and programming part
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. What is project management
  • Ans. 

    Project management is the process of planning, organizing, and controlling resources to achieve specific goals within a defined timeline.

    • It involves identifying project goals and objectives

    • Developing a project plan and timeline

    • Assigning tasks and responsibilities to team members

    • Monitoring progress and making adjustments as needed

    • Ensuring that the project is completed on time and within budget

    • Examples include constructi...

  • Answered by AI
Round 2 - HR 

(1 Question)

  • Q1. What capability do you have

Interview Preparation Tips

Interview preparation tips for other job seekers - Be cautious and clear about your final goal and good luck for future endeavors with good quality effect.
Interview experience
5
Excellent
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed before Nov 2022. There were 5 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Aptitude Test 

General Aptitude based on 1. logical and reasoning
2 English Grammar
3. Mathematical
4. Physics

Round 3 - Group Discussion 

Group discussion was about social media, HR team observed the people who are more involved and active through out the GD

Round 4 - Technical 

(1 Question)

  • Q1. Being a mechanical engineer I was asked about the Refrigeration concepts and Drawing skills
Round 5 - HR 

(1 Question)

  • Q1. Gone through my profile and asked me about my personal life and background.

Interview Preparation Tips

Interview preparation tips for other job seekers - Always be gentle and honest during the Interview. Make sure to show up even if you're not aware about the Job but able to Learn and attempt. Giving confidence to the Recruiters that you are the right one.
Round 1 - Technical 

(3 Questions)

  • Q1. My job profile is refrigeration and air conditioning
  • Q2. I'm work in fmi compeny in maintenance utility department
  • Q3. Computer basik knowladge

Interview Preparation Tips

Interview preparation tips for other job seekers - My Name is Manmohan my job profil is refrigeration and air conditioning

I applied via Apna Jobs and was interviewed in Mar 2022. There were 3 interview rounds.

Round 1 - Technical 

(1 Question)

  • Q1. What are your basic R&R?
Round 2 - Technical 

(1 Question)

  • Q1. What do you do when lot is NG & urgent for use?
  • Ans. 

    I will immediately investigate the cause of the NG lot and work with the team to find a solution to make it usable.

    • Investigate the cause of the NG lot

    • Work with the team to find a solution

    • Prioritize urgent use of the lot

    • Ensure quality control measures are in place

    • Communicate with stakeholders about the situation

  • Answered by AI
Round 3 - One-on-one 

(1 Question)

  • Q1. Why you wamt to leave current company & city?

Interview Preparation Tips

Interview preparation tips for other job seekers - You can go 2 ways: One, mention only those points which you have knowledge about & required as per JD; two mention the points required in JD & learn/practice them thoroughly.
I prefer the 1st one.
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed before Jun 2022. There were 5 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(3 Questions)

  • Q1. Questiones based on past experience and projects
  • Q2. Reason for switching the job
  • Q3. Knowledge of CAD softwares
Round 3 - Technical 

(7 Questions)

  • Q1. What is sub cooling in air conditioning?
  • Ans. 

    Sub cooling in air conditioning is the process of cooling the refrigerant below its saturation temperature to improve system efficiency.

    • Sub cooling increases the efficiency of the air conditioning system by ensuring the refrigerant is in a liquid state before entering the expansion valve.

    • It helps in preventing flash evaporation of the refrigerant, which can lead to inefficiencies in the system.

    • Sub cooling is typically ...

  • Answered by AI
  • Q2. How is ISEER rating calculated
  • Ans. 

    ISEER rating is calculated based on the weighted average of the cooling performance of an air conditioner under different conditions.

    • ISEER = (Weighted Cooling Capacity at 100% load x 0.4) + (Weighted Cooling Capacity at 75% load x 0.2) + (Weighted Cooling Capacity at 50% load x 0.4)

    • The higher the ISEER rating, the more energy efficient the air conditioner is.

    • ISEER rating helps consumers compare the energy efficiency of...

  • Answered by AI
  • Q3. Draw the Refrigeration cycle
  • Ans. 

    The refrigeration cycle is a thermodynamic cycle used in refrigerators and air conditioning systems to transfer heat from a low temperature to a high temperature environment.

    • The cycle consists of four main components: compressor, condenser, expansion valve, and evaporator.

    • The refrigerant enters the compressor as a low-pressure gas and leaves as a high-pressure, high-temperature gas.

    • The high-pressure gas then flows into...

  • Answered by AI
  • Q4. Mainstream refrigerants used in household air conditioning
  • Ans. 

    Mainstream refrigerants used in household air conditioning include R-410A, R-22, and R-134a.

    • R-410A is a popular refrigerant known for its high efficiency and environmental friendliness.

    • R-22, although being phased out due to its ozone-depleting properties, is still commonly found in older air conditioning systems.

    • R-134a is commonly used in automotive air conditioning systems but can also be found in some household units

  • Answered by AI
  • Q5. Explain 1 ton cooling concept
  • Ans. 

    1 ton cooling concept refers to the amount of heat required to melt one ton of ice in a 24-hour period.

    • 1 ton of cooling is equal to 12,000 BTUs per hour

    • It is commonly used in the HVAC industry to measure the cooling capacity of air conditioning systems

    • For example, a 2-ton air conditioner can remove 24,000 BTUs of heat per hour

  • Answered by AI
  • Q6. Relation between current, voltage and power
  • Ans. 

    The relationship between current, voltage, and power is described by Ohm's Law, which states that current is directly proportional to voltage and inversely proportional to resistance.

    • Ohm's Law states that V = I * R, where V is voltage, I is current, and R is resistance.

    • Power (P) is calculated using the formula P = V * I, where P is power, V is voltage, and I is current.

    • In a circuit with a constant resistance, an increa...

  • Answered by AI
  • Q7. Conversion from BTU to watts and vice versa
  • Ans. 

    1 BTU is approximately equal to 0.29307107 watts. To convert BTU to watts, multiply by 0.29307107. To convert watts to BTU, divide by 0.29307107.

    • 1 BTU = 0.29307107 watts

    • To convert BTU to watts, multiply by 0.29307107

    • To convert watts to BTU, divide by 0.29307107

  • Answered by AI
Round 4 - Psychometric Test 

(1 Question)

  • Q1. No questions just test
Round 5 - HR 

(5 Questions)

  • Q1. Would you be comfortable to regularly work extra hours?
  • Q2. Introduction about yourself?
  • Q3. Why do you want to join LG/ consumer durable industry?
  • Q4. If your manager and colleagues are busy with work , how will you manage to learn the things from them?
  • Q5. Present Salary and expected salary

Interview Preparation Tips

Interview preparation tips for other job seekers - Just be confident. And make LG as your last option if you want to go in consumer durable industry.
Contribute & help others!
anonymous
You can choose to be anonymous

Kent plc Interview FAQs

How many rounds are there in Kent plc Project Engineer interview?
Kent plc interview process usually has 1 rounds. The most common rounds in the Kent plc interview process are One-on-one Round.

Recently Viewed

REVIEWS

SHYAM METALICS AND ENERGY

No Reviews

REVIEWS

Titagarh Rail Systems

No Reviews

SALARIES

Kirloskar Ferrous Industries

INTERVIEWS

Praxair

No Interviews

REVIEWS

SHYAM METALICS AND ENERGY

No Reviews

REVIEWS

SHYAM METALICS AND ENERGY

No Reviews

REVIEWS

SHYAM METALICS AND ENERGY

No Reviews

SALARIES

Kirloskar Ferrous Industries

SALARIES

Titagarh Rail Systems

SALARIES

Hindalco Industries

Tell us how to improve this page.

Kent plc Project Engineer Interview Process

based on 1 interview

Interview experience

4
  
Good
View more
Kent plc Project Engineer Salary
based on 4 salaries
₹7 L/yr - ₹35.2 L/yr
317% more than the average Project Engineer Salary in India
View more details
Electrical Engineer
12 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Instrumentation Technician
12 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Hvac Technician
9 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Electrical Technician
8 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Electrical Technician
7 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Kent plc with

Eureka Forbes

3.7
Compare

Havells

4.0
Compare

Blue Star

4.1
Compare

Voltas

4.0
Compare
Did you find this page helpful?
Yes No
write
Share an Interview
Rate your experience using AmbitionBox
Terrible
Terrible
Poor
Poor
Average
Average
Good
Good
Excellent
Excellent