Upload Button Icon Add office photos

Shell

Compare button icon Compare button icon Compare

Proud winner of ABECA 2024 - AmbitionBox Employee Choice Awards

zig zag pattern zig zag pattern

Filter interviews by

Clear (1)

Shell Senior Engineer Interview Questions and Answers

Updated 20 Aug 2024

Shell Senior Engineer Interview Experiences

2 interviews found

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed before Aug 2023. There was 1 interview round.

Round 1 - Technical 

(3 Questions)

  • Q1. Explain the well integrity and well barrier elements.
  • Ans. 

    Well integrity and well barrier elements are crucial components in ensuring the safety and efficiency of oil and gas wells.

    • Well integrity refers to the ability of a well to contain fluids within the intended zones and prevent any leaks or failures.

    • Well barrier elements are physical or mechanical barriers that are put in place to prevent the escape of fluids from the wellbore.

    • Examples of well barrier elements include ca...

  • Answered by AI
  • Q2. Explain the processes involved in Upstream.
  • Ans. 

    Upstream processes involve exploration, drilling, and production of oil and gas.

    • Exploration: Involves searching for potential oil and gas reserves using seismic surveys and other techniques.

    • Drilling: Once a potential reserve is identified, wells are drilled to extract the oil and gas.

    • Production: Oil and gas are extracted from the wells and processed for distribution.

    • Examples: Offshore drilling in the Gulf of Mexico, sh

  • Answered by AI
  • Q3. Did you have any conflict with your supervisor of any others?
  • Ans. 

    No conflicts with supervisor or others.

    • I have not had any conflicts with my supervisor or colleagues.

    • I believe in open communication and resolving issues professionally.

    • I prioritize teamwork and collaboration to prevent conflicts from arising.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Be clear and honest
Interview experience
4
Good
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed before Nov 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(5 Questions)

  • Q1. Transformer testing
  • Q2. Transformer protection
  • Q3. SAP Maintenance module
  • Q4. Spare maintenance philosophy
  • Ans. 

    Spare maintenance philosophy focuses on maintaining spare parts to minimize downtime and ensure efficient operations.

    • Spare maintenance philosophy aims to have a sufficient inventory of spare parts to quickly replace any faulty components.

    • It involves regular inspections and maintenance of spare parts to ensure their functionality and readiness.

    • The philosophy emphasizes proactive planning and forecasting to anticipate th...

  • Answered by AI
  • Q5. Planning strategy

Interview Preparation Tips

Topics to prepare for Shell Senior Engineer interview:
  • Maintenance straight
  • SAP
Interview preparation tips for other job seekers - Prepared your self according your experience. Most important resume should be as per experience

Senior Engineer Interview Questions Asked at Other Companies

Q1. what is the meaning of M in M20,M25,M30 grade of concrete?
asked in Nagarro
Q2. Write a program: two input, one is N(any integer, lets say 3), se ... read more
asked in Tata Elxsi
Q3. What is Quality Assurance. Difference between Quality assurance a ... read more
Q4. Is it possible to work with multiple threads in core data? If so, ... read more
Q5. When you will perform Half or Full engine overhauling.

Interview questions from similar companies

I applied via Naukri.com and was interviewed before Jun 2020. There was 1 interview round.

Interview Questionnaire 

28 Questions

  • Q1. What is mean by safety
  • Ans. 

    Safety refers to the condition of being protected from harm, danger, or injury.

    • Safety involves taking measures to prevent accidents and injuries

    • It includes following rules and regulations to ensure a safe environment

    • Safety can be achieved through proper training and education

    • Examples of safety measures include wearing protective gear, using safety equipment, and practicing safe behaviors

    • Safety is important in all indus...

  • Answered by AI
  • Q2. What is LEL
  • Ans. 

    LEL stands for Lower Explosive Limit and is the minimum concentration of a gas or vapor in air that can ignite.

    • LEL is a safety term used in industries dealing with flammable gases and liquids.

    • It is expressed as a percentage of the gas or vapor in air.

    • If the concentration of the gas or vapor is below the LEL, it is too lean to ignite.

    • If the concentration is above the LEL, it is too rich and can ignite.

    • For example, the L...

  • Answered by AI
  • Q3. What is RA
  • Q4. What is JSA/JHA
  • Ans. 

    JSA/JHA stands for Job Safety Analysis/Job Hazard Analysis. It is a process of identifying potential hazards and risks in a job or task.

    • JSA/JHA is a systematic approach to identify and mitigate potential hazards in a job or task

    • It involves breaking down a job or task into steps and analyzing each step for potential hazards

    • The analysis includes identifying the hazards, assessing the risks, and implementing controls to m...

  • Answered by AI
  • Q5. Role of HSE
  • Ans. 

    HSE plays a crucial role in ensuring the safety and well-being of employees and the environment.

    • HSE stands for Health, Safety, and Environment.

    • It involves identifying and assessing potential hazards and implementing measures to control or eliminate them.

    • HSE also includes training employees on safety procedures and emergency response plans.

    • Examples of HSE measures include wearing personal protective equipment, conductin...

  • Answered by AI
  • Q6. What is Hchem
  • Ans. 

    Hchem is not a known term or acronym in the engineering field.

    • Hchem is not a commonly used term in engineering

    • It is possible that the interviewer misspoke or meant to ask a different question

    • Without more context, it is difficult to provide a more specific answer

  • Answered by AI
  • Q7. What is Hazop
  • Ans. 

    Hazop is a structured and systematic technique used to identify potential hazards and operability problems in industrial processes.

    • Hazop stands for Hazard and Operability Study

    • It involves a team of experts analyzing a process to identify potential hazards and operability issues

    • Hazop is commonly used in the chemical, oil and gas, and pharmaceutical industries

    • The process involves breaking down the process into smaller pa...

  • Answered by AI
  • Q8. What is confined space
  • Ans. 

    Confined space refers to an area that is enclosed and has limited access and ventilation.

    • Examples include tanks, silos, sewers, and tunnels.

    • Workers entering confined spaces must follow safety protocols and use specialized equipment.

    • Hazards in confined spaces include lack of oxygen, toxic gases, and physical obstructions.

    • Proper training and communication are crucial for working in confined spaces.

  • Answered by AI
  • Q9. What is work at height
  • Ans. 

    Work at height refers to any task performed at a height where a person could fall and injure themselves.

    • Work at height involves working on ladders, scaffolding, roofs, or any other elevated surface

    • It is important to use appropriate safety equipment such as harnesses, guardrails, and safety nets

    • Workers should be trained on how to safely work at height and how to properly use safety equipment

    • Examples of work at height in...

  • Answered by AI
  • Q10. Hazard of confined space
  • Ans. 

    Confined spaces pose a significant hazard due to limited entry and exit points, poor ventilation, and potential for hazardous substances.

    • Limited entry and exit points can make it difficult to escape in case of an emergency

    • Poor ventilation can lead to a buildup of toxic gases or lack of oxygen

    • Potential for hazardous substances such as chemicals, fumes, or dust

    • Examples include tanks, silos, sewers, and tunnels

    • Proper trai...

  • Answered by AI
  • Q11. Precautions of confined space
  • Ans. 

    Precautions to be taken while working in confined spaces

    • Proper ventilation and air quality testing

    • Use of personal protective equipment

    • Proper lighting and communication equipment

    • Training and certification for workers

    • Emergency rescue plan in place

  • Answered by AI
  • Q12. What is LEL&UEL
  • Ans. 

    LEL&UEL stands for Lower Explosive Limit and Upper Explosive Limit respectively. They are the minimum and maximum concentrations of a flammable gas or vapor in air that can ignite.

    • LEL is the lowest concentration of a gas or vapor that can ignite

    • UEL is the highest concentration of a gas or vapor that can ignite

    • Concentrations between LEL and UEL are considered flammable

    • LEL and UEL vary depending on the gas or vapor

    • LEL an...

  • Answered by AI
  • Q13. What is competent person
  • Q14. What is fire
  • Ans. 

    Fire is a chemical reaction that releases heat, light, and various gases.

    • Fire is a rapid oxidation process that occurs when fuel (such as wood, paper, or gasoline) combines with oxygen in the presence of heat or a spark.

    • It releases heat, light, and various gases such as carbon dioxide, water vapor, and nitrogen oxides.

    • Fire can be beneficial (such as for cooking or heating) or destructive (such as in wildfires or house ...

  • Answered by AI
  • Q15. Types of fire
  • Ans. 

    There are four types of fire: Class A, Class B, Class C, and Class D.

    • Class A fires involve ordinary combustibles such as wood, paper, or cloth.

    • Class B fires involve flammable liquids or gases such as gasoline, oil, or propane.

    • Class C fires involve electrical equipment such as appliances, wiring, or circuit breakers.

    • Class D fires involve combustible metals such as magnesium, titanium, or sodium.

  • Answered by AI
  • Q16. Type of extinguisher
  • Ans. 

    There are different types of fire extinguishers for different types of fires.

    • Water extinguishers for Class A fires (wood, paper, cloth, etc.)

    • CO2 extinguishers for Class B and C fires (flammable liquids and electrical fires)

    • Dry chemical extinguishers for Class A, B, and C fires

    • Foam extinguishers for Class A and B fires

    • Wet chemical extinguishers for Class K fires (cooking oils and fats)

  • Answered by AI
  • Q17. Modes of heat transfer
  • Ans. 

    Modes of heat transfer include conduction, convection, and radiation.

    • Conduction is the transfer of heat through a material without any movement of the material itself.

    • Convection is the transfer of heat through the movement of fluids, such as air or water.

    • Radiation is the transfer of heat through electromagnetic waves, such as from the sun or a fire.

  • Answered by AI
  • Q18. How to prevent fire
  • Ans. 

    Preventing fire requires proper handling of flammable materials and regular maintenance of electrical equipment.

    • Store flammable materials in designated areas away from heat sources

    • Regularly inspect and maintain electrical equipment

    • Install smoke detectors and fire extinguishers in appropriate locations

    • Train employees on fire safety procedures and evacuation plans

  • Answered by AI
  • Q19. What is msds
  • Ans. 

    MSDS stands for Material Safety Data Sheet.

    • MSDS provides information about hazardous chemicals and substances.

    • It includes information about the physical and chemical properties of the substance, health hazards, precautions for safe handling and use, and emergency procedures.

    • MSDS is required by law for all hazardous chemicals and substances used in the workplace.

    • It is important to read and understand the MSDS before usi...

  • Answered by AI
  • Q20. How to do firefighting
  • Ans. 

    Firefighting involves identifying and extinguishing fires to prevent damage and loss of life.

    • Assess the situation and determine the type and size of fire

    • Use appropriate firefighting equipment such as fire extinguishers, hoses, and pumps

    • Follow safety protocols and wear protective gear

    • Coordinate with other firefighters and emergency responders

    • Evacuate people from the affected area

    • Monitor the situation and ensure the fire

  • Answered by AI
  • Q21. How to prevent the accident
  • Ans. 

    Prevent accidents by identifying potential hazards and implementing safety measures.

    • Conduct regular safety audits and risk assessments

    • Provide proper training and education to employees

    • Implement safety protocols and procedures

    • Use appropriate safety equipment and gear

    • Encourage a culture of safety and accountability

    • Regularly review and update safety policies and procedures

  • Answered by AI
  • Q22. How to investigate the accident
  • Ans. 

    To investigate an accident, follow a systematic approach involving data collection, analysis, and identification of root causes.

    • Gather all available information about the accident, including eyewitness accounts, photographs, and any relevant documents or records.

    • Conduct interviews with individuals involved in the accident to gather their perspectives and insights.

    • Examine the accident scene for physical evidence, such a...

  • Answered by AI
  • Q23. Emergency procedure
  • Q24. What is H2s
  • Ans. 

    H2S is a colorless, flammable, and toxic gas with a strong odor of rotten eggs.

    • H2S is commonly known as hydrogen sulfide.

    • It is produced naturally by the breakdown of organic matter and is found in natural gas, crude oil, and volcanic gases.

    • It is highly toxic and can cause respiratory failure, loss of consciousness, and even death.

    • H2S is used in various industries such as oil and gas, mining, and pulp and paper.

    • It is al...

  • Answered by AI
  • Q25. Properties of H2s
  • Ans. 

    H2S is a colorless, flammable, and toxic gas with a strong odor of rotten eggs.

    • H2S is highly flammable and can ignite easily

    • It is toxic and can cause respiratory failure

    • It has a distinctive odor of rotten eggs

    • H2S is used in the production of sulfuric acid and in the petroleum industry

  • Answered by AI
  • Q26. Hirerchy procedure
  • Q27. Permissible exposure limit of H2s,co,co2,methane
  • Ans. 

    Permissible exposure limits (PEL) are the maximum allowable concentrations of hazardous substances in the workplace.

    • H2S: PEL is 10 ppm (parts per million) over an 8-hour workday

    • CO: PEL is 50 ppm over an 8-hour workday

    • CO2: No specific PEL, but recommended exposure limit is 5,000 ppm over an 8-hour workday

    • Methane: No specific PEL, but recommended exposure limit is 1,000 ppm over an 8-hour workday

  • Answered by AI
  • Q28. Short term exposure limit of H2s
  • Ans. 

    Short term exposure limit (STEL) of H2S is 10 ppm.

    • STEL is the maximum concentration of a substance that a worker can be exposed to for a short period of time without suffering from immediate or long-term health effects.

    • The STEL for H2S is set at 10 ppm (parts per million) by OSHA (Occupational Safety and Health Administration).

    • Exposure to H2S at levels above the STEL can cause symptoms such as eye irritation, headache,...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Keep calm when you are giving the interview and first prepare the interview

I applied via Company Website and was interviewed before Sep 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(2 Questions)

  • Q1. How will you identify if a pump is cavitating while working on a DCS panel?
  • Ans. 

    To identify if a pump is cavitating while working on a DCS panel, you can look for certain indicators.

    • Monitor the pump's suction pressure. If it is fluctuating or dropping below the specified range, it may indicate cavitation.

    • Check the pump's discharge pressure. If it is higher than normal, it could be a sign of cavitation.

    • Listen for unusual noises such as a rattling or grinding sound coming from the pump.

    • Inspect the p...

  • Answered by AI
  • Q2. How would you prepare a hydrocarbon vessel for vessel entry?
  • Ans. 

    To prepare a hydrocarbon vessel for vessel entry, follow these steps:

    • Ensure the vessel is properly isolated from the process and all sources of energy

    • Ventilate the vessel to remove any flammable or toxic gases

    • Perform a thorough inspection of the vessel for any signs of leaks or damage

    • Implement proper lockout/tagout procedures to prevent accidental activation of equipment

    • Provide appropriate personal protective equipment...

  • Answered by AI

Interview Preparation Tips

Topics to prepare for GAIL Senior Engineer interview:
  • Chemical Engineering
  • DCS Operations
Interview preparation tips for other job seekers - Try to answer the questions asked in simple words. The interviewer generally wants to judge an interviewee based on his understanding of the subject. When an applicant is appearing for an interview, he should share his experience and try to quote examples from his experience.
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed in Jan 2024. There were 3 interview rounds.

Round 1 - Group Discussion 

My GD topic was renewable energy.

Round 2 - HR 

(7 Questions)

  • Q1. Tell me about yourself
  • Ans. 

    I am a Senior Engineer with 10+ years of experience in designing and implementing complex systems.

    • 10+ years of experience in engineering

    • Specialize in designing and implementing complex systems

    • Strong problem-solving skills

    • Experience with various programming languages such as Java, Python, and C++

  • Answered by AI
  • Q2. Why do you want to leave your previous company and join GAIL
  • Ans. 

    Seeking new challenges and growth opportunities at GAIL.

    • Desire for new challenges and opportunities for growth

    • Interested in working in a different industry or with different technologies

    • Attracted to GAIL's reputation and projects

    • Seeking a more collaborative and innovative work environment

  • Answered by AI
  • Q3. What do your parents do
  • Ans. 

    My parents are both retired now, but my father used to work as a civil engineer and my mother was a teacher.

    • Father worked as a civil engineer

    • Mother was a teacher

    • Both are retired now

  • Answered by AI
  • Q4. Have you ever visited Delhi earlier
  • Ans. 

    Yes, I have visited Delhi earlier for a business trip.

    • Visited Delhi for a business trip

    • Explored historical sites like Red Fort and Qutub Minar

    • Enjoyed local cuisine like butter chicken and chaat

  • Answered by AI
  • Q5. How did you reach Noida for interview
  • Q6. Where are you staying in Noida for interview process
  • Ans. 

    I am staying at a hotel in Sector 18, Noida for the interview process.

    • Staying at a hotel in Sector 18, Noida

    • Close to the interview location

    • Comfortable accommodation for the duration of the process

  • Answered by AI
  • Q7. Related family background
Round 3 - Technical 

(7 Questions)

  • Q1. Detailed technical questions about bearing, pump, furnace tubes (1st and 2nd pass)MOC, TLE MOC, heat exchanger tube MOC, TEMA codes and classification etc.
  • Q2. Decoking process of cracking furnace, Naphtha circuit of furnace with sketches,
  • Ans. 

    Decoking process involves removing coke deposits from cracking furnace and naphtha circuit to maintain efficiency.

    • Decoking process involves burning off coke deposits using controlled combustion.

    • Mechanical decoking involves using high-pressure water jets to remove coke deposits.

    • Chemical decoking involves using solvents or acids to dissolve coke deposits.

    • Regular decoking is essential to prevent blockages and maintain fur

  • Answered by AI
  • Q3. Detailed refrigeration cycles
  • Ans. 

    Refrigeration cycles are thermodynamic processes used in refrigerators and air conditioners to transfer heat from a low temperature reservoir to a high temperature reservoir.

    • Refrigeration cycles typically involve four main components: compressor, condenser, expansion valve, and evaporator.

    • The refrigerant undergoes a cycle of compression, condensation, expansion, and evaporation to absorb heat from the space being coole...

  • Answered by AI
  • Q4. Safety related questions which I couldn't answer well
  • Q5. Safety procedures before starting of hot job
  • Ans. 

    Safety procedures before starting a hot job include obtaining a hot work permit, conducting a hazard assessment, ensuring proper ventilation, and having fire extinguishing equipment nearby.

    • Obtain a hot work permit before starting any hot job

    • Conduct a hazard assessment to identify potential risks

    • Ensure proper ventilation in the work area to prevent buildup of flammable gases

    • Have fire extinguishing equipment nearby and r

  • Answered by AI
  • Q6. Furnace tubes Welding related questions
  • Q7. Scaffolding and insulation related general questions (easy)

Interview Preparation Tips

Interview preparation tips for other job seekers - Be prepared for GD and just keep enough technical knowledge on your field of experience. Be relaxed and give interview with happy face..don't be depressed if you couldn't answer any question during interview. If you don't know anything just say "I don't know" ...keep the things simple and give honest answer always.

I applied via Company Website and was interviewed in Nov 2021. There were 4 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. About work experience and responsibilities
  • Q2. Why you are leaving to present job

Interview Preparation Tips

Interview preparation tips for other job seekers - Maintain your confidence level, give suitable answer if you know otherwise say sorry and move to next question....
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Aptitude Test 

It was good as well as challenging

Round 3 - Technical 

(1 Question)

  • Q1. 1- cement testing 2- communication level 3- situation based question 4- awareness and confidence test 5- Techncial based question

Interview Preparation Tips

Interview preparation tips for other job seekers - Be positive and enhance your knowledge!!
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
More than 8 weeks
Result
Selected Selected

I applied via Newspaper Ad and was interviewed before Oct 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(1 Question)

  • Q1. I was asked to make a presentation on laser technology.
Round 3 - Aptitude Test 

Knowledge of the English language, its vocabulary and comprehension. Ability to solve basic mathematical problem, which shows the capacity to use an analytical approach to everyday puzzles.

Interview Preparation Tips

Interview preparation tips for other job seekers - One needs to present a bright visage. Then, you have to open minded towards the solutions to problems, instead of being dogmatic.
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Nov 2022. There were 3 interview rounds.

Round 1 - Technical 

(1 Question)

  • Q1. Related to field.
Round 2 - One-on-one 

(1 Question)

  • Q1. What is the market salery for civil engineer with 12 years experience?
  • Ans. 

    The market salary for a civil engineer with 12 years of experience varies depending on location, company size, and specific skills.

    • Market salary can range from $80,000 to $150,000 per year

    • Factors such as location (urban vs rural), company size, and industry specialization can impact salary

    • Additional certifications or advanced degrees can also increase salary potential

  • Answered by AI
Round 3 - Aptitude Test 

One question paper of 10 questions.

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare well for technical interview.

I applied via Company Website and was interviewed in Oct 2021. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(1 Question)

  • Q1. Regarding your subject and work experience
Round 3 - HR 

(1 Question)

  • Q1. Your current package and further expectations.

Interview Preparation Tips

Interview preparation tips for other job seekers - Answer all subjective questions in your field with full knowledge and confidence.
Contribute & help others!
anonymous
You can choose to be anonymous

Shell Interview FAQs

How many rounds are there in Shell Senior Engineer interview?
Shell interview process usually has 1-2 rounds. The most common rounds in the Shell interview process are Technical and Resume Shortlist.
What are the top questions asked in Shell Senior Engineer interview?

Some of the top questions asked at the Shell Senior Engineer interview -

  1. Explain the well integrity and well barrier elemen...read more
  2. Explain the processes involved in Upstre...read more
  3. Spare maintenance philoso...read more

Recently Viewed

INTERVIEWS

Shell

No Interviews

SALARIES

Moglix

INTERVIEWS

Al Turki Enterprises

No Interviews

SALARIES

Moglix

SALARIES

Moglix

INTERVIEWS

Shell

No Interviews

LIST OF COMPANIES

Shell

Locations

INTERVIEWS

Shell

50 top interview questions

COMPANY BENEFITS

Snapdeal

No Benefits

SALARIES

Moglix

Tell us how to improve this page.

Shell Senior Engineer Interview Process

based on 2 interviews

Interview experience

4
  
Good
View more
Shell Senior Engineer Salary
based on 50 salaries
₹10.5 L/yr - ₹21 L/yr
76% more than the average Senior Engineer Salary in India
View more details

Shell Senior Engineer Reviews and Ratings

based on 9 reviews

3.7/5

Rating in categories

3.6

Skill development

4.8

Work-life balance

3.5

Salary

3.6

Job security

3.9

Company culture

3.2

Promotions

3.0

Work satisfaction

Explore 9 Reviews and Ratings
Software Engineer
501 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Business Analyst
490 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Project Manager
238 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Process Data Engineer
238 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Data Engineer
221 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Shell with

Reliance Industries

4.0
Compare

Oil And Natural Gas Corporation

4.3
Compare

Indian Oil Corporation

4.4
Compare

Bharat Petroleum

4.1
Compare
Did you find this page helpful?
Yes No
write
Share an Interview