Add office photos
i
Kent plc
Compare
Filter interviews by
Kent plc Electrical Technician Interview Questions and Answers
Kent plc Electrical Technician Interview Experiences
4 interviews found
(3 Questions)
- Q1. Preventive Maintenance of All Kinds of H.V & LV Breakers, Motors, Voltage Up To 33 KV & 11 KV & 6.6.KV /2400 KW ,Transformer(15.75KV /230 KV ), Corrective Maintenance of HV/MV /LV Switches gears,VCB,AC...
- Ans.
Preventive and corrective maintenance of various electrical equipment including breakers, motors, transformers, and relays.
Perform regular maintenance on high and low voltage breakers, motors, and transformers.
Test and calibrate various protection relays for motors, transformers, and generators.
Conduct transformer oil BDV test, thermal scanning, and earth fault and prediction tests.
Terminate high voltage motors, instal...
- Q2. Preventive Maintenance of All Kinds of H.V & LV Breakers, Motors, Voltage Up To 33 KV & 11 KV & 6.6.KV /2400 KW ,Transformer(15.75KV /230 KV ), Corrective Maintenance of HV/MV /LV Switches gears,VCB,AC...
- Ans.
Preventive and corrective maintenance of various electrical equipment including breakers, motors, transformers, and relays.
Perform regular maintenance tasks on high and low voltage breakers, motors, and transformers.
Test and calibrate protection relays for motors, transformers, and generators.
Conduct transformer oil BDV tests, thermal scanning, and earth fault and prediction tests.
Terminate high voltage motors, install...
- Q3. Preventive Maintenance of All Kinds of H.V & LV Breakers, Motors, Voltage Up To 33 KV & 11 KV & 6.6.KV /2400 KW ,Transformer(15.75KV /230 KV ), Corrective Maintenance of HV/MV /LV Switches gears,VCB,AC...
- Ans.
Preventive and corrective maintenance of various electrical equipment including breakers, motors, transformers, switches, relays, and testing/calibration of protections.
Preventive maintenance of H.V & LV breakers, motors, transformers, switches, etc.
Corrective maintenance of HV/MV/LV switchgears, breakers, cubicles, etc.
Testing and calibration of various protection relays for motors, transformers, generators.
Transforme...
Interview Preparation Tips
KV & 6.6.KV /2400 KW ,Transformer(15.75KV /230 KV ), Corrective Maintenance of HV/MV /LV
Switches gears,VCB,ACB,MOCB,SF6 Breakers, Breaker cubicle, earthling Switches ,Generator
earthling Switch ETC. Testing and calibration of all kinds of protections Relay of High Voltage and
low Voltage Motors, Transformers ,Generator like Under Voltage Relay , locked Rotor Relay
,Differential Relay , Negative Phase Sequence Relay , Over current/Thermal Over Current Relay ,
Bucholz Relay , DGPT Relay ETC. Transformer Oil BDV Test, Thermal Scanning , Earth fault and
Prediction Test of Equipment .Termination of high Voltage Motors , Cable Errection , Installation of
Motors, and Trial/Load Test. Transformer Oil Extracting ,Testing (BDV), Oil Filtration .
Equipments Of Oil & Gas Plant , Chlorine Plant, co2 plant
Maintenance of battery Banks , UPS for auxiliary Start UP and Control Voltage call safe supply.
EQUIPMENT UNDER RESPONSIBILITIES :
MV MOTORS UPTO 2400 KW / 3 PHASE / 6600V / 60HZ
LV MOTORS UPTO 125 KW / 3PHANSE / 380V / 60HZ
RECTIFIER FOR CL2 PLANT CELL 3000 AMP / 380/60HZ / 120V DC
TRANSFORMERS 15.75 KV / 230 KV – 150MVA
TRANSFORMERS 15.75 KV / 6.6KV – 80 MVA
TRANSFORMERS 6.6KV / 380V – 800KVA
BATTERY BANKS 2000 AMP
INVERTER / CHARGER 2000 AMP SWITCH GEARS MV 6.6 KV / 3500 AMP SWITCH
I applied via Recruitment Consultant and was interviewed in May 2021. There were 3 interview rounds.
Interview Questionnaire
3 Questions
- Q1. Transformer prtection
- Q2. What is the means stall in motor
- Ans.
Stall in a motor refers to a condition where the motor stops rotating despite the presence of power supply.
Stall occurs when the motor is overloaded or when there is a mechanical obstruction preventing the motor from rotating.
It can also occur when the motor is underpowered or when there is a fault in the electrical system.
Stall can cause damage to the motor and other components if not addressed promptly.
Examples of mo...
- Q3. Ups function.whateverparts in ups? W
- Ans.
UPS stands for Uninterruptible Power Supply. It is an electrical device that provides emergency power to a load when the input power source fails.
UPS has three main components: battery, inverter, and rectifier.
The battery provides backup power during a power outage.
The rectifier converts AC power to DC power to charge the battery.
The inverter converts DC power from the battery to AC power to supply the load.
UPS also ha...
Interview Preparation Tips
Interview Questionnaire
2 Questions
- Q1. Electrical
- Q2. All type Electrical
Interview Preparation Tips
I was interviewed in Oct 2019.
Interview Questionnaire
1 Question
- Q1. Electrical Technician
Interview Preparation Tips
Kent plc interview questions for designations
Top trending discussions
Interview questions from similar companies
Selected
I applied via Recruitment Consulltant
(2 Questions)
- Q1. I am electrical technician Offshor returner
- Q2. Diploma 12th
(1 Question)
- Q1. To
Selected
(2 Questions)
- Q1. Assigned for the Construction, Commissioning and Operation works related to tunnel system
- Q2. Work includes Loop checking, testing, commissioning, functional test and trouble shooting of LV Switch gear. MCC, Motors, VFD
Interview Preparation Tips
Ananay Kaushik
(1 Question)
- Q1. Technical questions
Rotten egg on inverted pen, social media
(1 Question)
- Q1. Interview questions
(2 Questions)
- Q1. My education completed my experience electrical associate Alstom manufacturing pvt India
- Q2. My all experiences plant mantenance
Interview Preparation Tips
Senior Electrical Engineer Interview Questions & Answers
Saudi Aramco
Anonymous
posted on 30 Sep 2022
I applied via Recruitment Consulltant and was interviewed in Aug 2022. There were 2 interview rounds.
(2 Questions)
- Q1. General questions related to past work experience and previous job changes.
- Q2. It was an interview to check personality traits rather that technical knowledge
Interview Preparation Tips
I applied via Company Website and was interviewed in Apr 2022. There was 1 interview round.
(1 Question)
- Q1. 1. Tell me about urself. 2. Questions from whatever projects,achievements you highlighted in resume or during answering ques bo 1
Interview Preparation Tips
Kent plc Interview FAQs
Tell us how to improve this page.
Kent plc Interviews By Designations
- Kent plc Electrical Technician Interview Questions
- Kent plc Mechanical Technician Interview Questions
- Kent plc Piping Foreman Interview Questions
- Kent plc Electrical Commissioning Technician Interview Questions
- Kent plc Pipe Fitter and Fabricator Interview Questions
- Kent plc Project Engineer Interview Questions
- Kent plc Safety Officer Interview Questions
- Kent plc Senior Electrical Technician Interview Questions
- Show more
Interview Questions for Popular Designations
- Electrical Engineer Interview Questions
- Diploma Electrical Engineer Interview Questions
- Electrical Supervisor Interview Questions
- Electrical Maintenance Engineer Interview Questions
- Electrical Maintenance Technician Interview Questions
- Electrical Foreman Interview Questions
- Senior Electrical Technician Interview Questions
- Junior Engineer Electrical Interview Questions
- Show more
Kent plc Electrical Technician Interview Process
based on 1 interview
Interview experience
Electrical Technician Interview Questions from Similar Companies
Kent plc Electrical Technician Reviews and Ratings
based on 17 reviews
Rating in categories
|
Instrumentation Technician
12
salaries
|  ₹6.2 L/yr - ₹12 L/yr |
|
Electrical Engineer
11
salaries
| ₹10 L/yr - ₹24.4 L/yr |
|
Hvac Technician
9
salaries
| ₹7 L/yr - ₹10 L/yr |
|
Electrical Technician
8
salaries
| ₹4.3 L/yr - ₹11.2 L/yr |
|
Senior Electrical Technician
7
salaries
| ₹1.8 L/yr - ₹12.6 L/yr |
Eureka Forbes
Havells
Blue Star
Voltas
- Home >
- Interviews >
- Kent plc Interview Questions >
- Kent plc Electrical Technician Interview Questions
