Upload Button Icon Add office photos
Engaged Employer

i

This company page is being actively managed by Kent plc Team. If you also belong to the team, you can get access from here

Kent plc Verified Tick

Compare button icon Compare button icon Compare

Filter interviews by

Clear (1)

Kent plc Mechanical Technician Interview Questions and Answers

Updated 24 Jun 2020

Kent plc Mechanical Technician Interview Experiences

2 interviews found

I applied via Recruitment Consultant and was interviewed before Jun 2019. There were 4 interview rounds.

Interview Questionnaire 

4 Questions

  • Q1. 1.Pump and compressor trouble shooting.
  • Q2. Safety watch roles and responsible
  • Q3. Blinding procedure
  • Q4. Pump alignment

Interview Preparation Tips

Interview preparation tips for other job seekers - If you know answer ,tell .if dont know the answer , say I don't know

I applied via Recruitment Consultant and was interviewed before Jun 2019. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. 1. During confined space job , what is the role of safety watch ? 2. Alignment method of pump and motor. 3. Different type of Gasket , valves using in plant. 4. Compressor type and trouble shooting of rec...
  • Ans. 

    Answering questions related to confined space job, alignment of pump and motor, types of gaskets and valves, and troubleshooting reciprocating compressor.

    • Safety watch is responsible for monitoring the workers inside the confined space and ensuring their safety.

    • Alignment of pump and motor can be done using dial indicators or laser alignment tools.

    • Different types of gaskets include spiral wound, ring joint, and sheet gas...

  • Answered by AI

Mechanical Technician Interview Questions Asked at Other Companies

asked in Kent plc
Q1. 1. During confined space job , what is the role of safety watch ? ... read more
Q2. How many types of valve? What are they?
asked in AOS Orwell
Q3. what is a compressor? and give example of instrument that works o ... read more
Q4. How many types of heat exchanger? What are they?
Q5. 1) What is process before starting Excenger work ?

Interview questions from similar companies

Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. Ac technician installing
  • Q2. Repair and service

Interview Questionnaire 

1 Question

  • Q1. Electrical
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed in Jul 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(2 Questions)

  • Q1. What is mcb and use
  • Ans. 

    MCB stands for Miniature Circuit Breaker. It is a type of electrical protection device that automatically switches off electrical circuits during abnormal conditions.

    • MCB is used to protect electrical circuits from overloads and short circuits.

    • It is a more convenient and reliable alternative to fuses.

    • MCBs come in different ratings to suit different electrical loads.

    • They can be easily reset after tripping, unlike fuses w...

  • Answered by AI
  • Q2. Mcb use by home and company and safety wiring by sot sarcit
  • Ans. 

    Mcb is used for safety in both homes and companies. Safety wiring is essential for preventing electrical hazards.

    • Mcb (Miniature Circuit Breaker) is used in homes and companies to protect electrical circuits from overloads and short circuits.

    • Safety wiring, such as grounding wires and proper insulation, is crucial for preventing electrical shocks and fires.

    • Proper installation and maintenance of Mcbs and safety wiring are...

  • Answered by AI
Round 3 - HR 

(2 Questions)

  • Q1. Maintenance work use by tools other
  • Ans. 

    Maintenance work often requires the use of various tools and equipment.

    • Maintenance work may involve using tools such as screwdrivers, wrenches, pliers, multimeters, and power drills.

    • Different tools are used for different tasks, such as testing electrical circuits, tightening bolts, or replacing components.

    • Regular maintenance of equipment may require specialized tools specific to the machinery being serviced.

    • Proper tool...

  • Answered by AI
  • Q2. Maintenance work use by electrical iqument tap.cutter.etc
  • Ans. 

    Maintenance work often involves using electrical equipment such as tap cutters.

    • Regularly inspecting and cleaning electrical equipment to ensure proper functioning

    • Replacing worn out parts or components as needed

    • Testing equipment after maintenance to ensure it is working correctly

    • Following safety procedures when working with electrical equipment

    • Keeping a record of maintenance work done on each piece of equipment

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - No
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(5 Questions)

  • Q1. How to join your company to work him
  • Q2. How much salary for fresher accountant?
  • Q3. How to work a best employer?
  • Ans. 

    To work for the best employer, one must prioritize a positive work culture, opportunities for growth, fair compensation, and open communication.

    • Prioritize a positive work culture where employees feel valued and supported.

    • Look for opportunities for growth and development within the company.

    • Ensure fair compensation and benefits for employees.

    • Maintain open communication channels between employees and management.

    • Seek out a...

  • Answered by AI
  • Q4. Company providesme some benfits like medical ' health travelling'?
  • Q5. What was the grow in 5 years company dalma?
Round 3 - Group Discussion 

Impressive for me something question didn't satisfied

Interview Preparation Tips

Interview preparation tips for other job seekers - Ok that's enough for me

I applied via Walk-in and was interviewed in Mar 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(6 Questions)

  • Q1. What is encoder, proxy
  • Ans. 

    An encoder is a device that converts motion into an electrical signal. A proxy is a server that acts as an intermediary for requests from clients.

    • Encoders are used in various applications such as robotics, automation, and CNC machines.

    • Proxies are commonly used in computer networks to improve security and performance.

    • An example of an encoder is a rotary encoder that converts the rotational motion of a shaft into an elec...

  • Answered by AI
  • Q2. How to chake transformer
  • Ans. 

    To check a transformer, perform visual inspection, measure voltage and current, and test insulation resistance.

    • Perform a visual inspection of the transformer for any physical damage or signs of overheating.

    • Measure the voltage and current using a multimeter to ensure they are within the rated values.

    • Test the insulation resistance using a megohmmeter to ensure it is above the minimum value.

    • Perform a polarity test to ensu...

  • Answered by AI
  • Q3. How to chake motor conditions
  • Ans. 

    To check motor conditions, perform visual inspection, measure voltage and current, check for abnormal noises, and test motor performance.

    • Perform a visual inspection to check for any physical damage or loose connections.

    • Measure the voltage and current using a multimeter to ensure they are within the specified range.

    • Listen for any abnormal noises such as grinding or squealing that may indicate motor issues.

    • Test the motor...

  • Answered by AI
  • Q4. Why use in VFD drive
  • Ans. 

    VFD drives are used to control the speed and torque of electric motors, resulting in energy savings and improved motor performance.

    • VFD drives allow for precise control of motor speed and torque.

    • They can be used to match the motor speed to the load requirements, resulting in energy savings.

    • VFD drives can improve motor performance by reducing mechanical stress and wear.

    • They enable soft starting and stopping of motors, re...

  • Answered by AI
  • Q5. What different in Acb, vcb breaker
  • Ans. 

    ACB and VCB breakers are both types of circuit breakers used in electrical systems, but they differ in their operating mechanisms.

    • ACB stands for Air Circuit Breaker, while VCB stands for Vacuum Circuit Breaker.

    • ACB breakers use air as the medium for arc extinction, while VCB breakers use vacuum.

    • ACB breakers are typically used for low voltage applications, while VCB breakers are used for medium to high voltage applicatio...

  • Answered by AI
  • Q6. What is Di or Do how to work
  • Ans. 

    Di and Do are electrical protection devices used in low voltage systems to protect against overcurrent and short circuits.

    • Di stands for Differential Current Protection and is used to detect and protect against ground faults and leakage currents.

    • Do stands for Overcurrent Protection and is used to protect against overloads and short circuits.

    • Di works by comparing the current flowing in the live and neutral conductors, an...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - I working allows hard and experiment electrical device
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed in Jul 2023. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. Who is the encoder
  • Ans. 

    An encoder is a device or circuit that converts information from one format to another.

    • An encoder can be a hardware device or a software program.

    • In the context of electrical engineering, an encoder is often used to convert analog signals into digital signals.

    • Encoders are commonly used in communication systems, robotics, and industrial automation.

    • Examples of encoders include rotary encoders used in motor control and opt

  • Answered by AI

Skills evaluated in this interview

I applied via Job Fair

Interview Questionnaire 

2 Questions

  • Q1. Whatis the dol strater
  • Ans. 

    DOL starter is a direct online starter used to start and stop the motor instantly.

    • DOL stands for Direct Online.

    • It is used to start and stop the motor instantly.

    • It is the simplest and cheapest method of starting a motor.

    • It consists of a contactor, overload relay, and start and stop push buttons.

    • It is used for small motors up to 5 horsepower.

    • It is not suitable for large motors as it causes a high starting current.

    • Example...

  • Answered by AI
  • Q2. Dol is direct online strater

Interview Preparation Tips

Interview preparation tips for other job seekers - Kindly ask candidates language also provide good facilities.

I applied via Company Website and was interviewed in Mar 2021. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. My marketing executive skills

Interview Preparation Tips

Interview preparation tips for other job seekers - My first interview very nice moments
Contribute & help others!
anonymous
You can choose to be anonymous

Kent plc Interview FAQs

What are the top questions asked in Kent plc Mechanical Technician interview?

Some of the top questions asked at the Kent plc Mechanical Technician interview -

  1. 1. During confined space job , what is the role of safety watch ? 2. Alignment ...read more
  2. 1.Pump and compressor trouble shooti...read more
  3. Safety watch roles and responsi...read more

Recently Viewed

INTERVIEWS

VERITY GLOBAL SOLUTIONS

No Interviews

REVIEWS

APT Research Private Limited

No Reviews

REVIEWS

Ola Electric Mobility

No Reviews

JOBS

NxtWave

No Jobs

SALARIES

K12 Techno Services

SALARIES

Ola Electric Mobility

SALARIES

VERITY GLOBAL SOLUTIONS

INTERVIEWS

Sl Lumax

No Interviews

SALARIES

Ola Electric Mobility

SALARIES

Ola Electric Mobility

Tell us how to improve this page.

Interview Questions from Similar Companies

Samsung Interview Questions
3.9
 • 545 Interviews
Siemens Interview Questions
4.1
 • 417 Interviews
Havells Interview Questions
4.0
 • 209 Interviews
LG Electronics Interview Questions
4.0
 • 194 Interviews
Shell Interview Questions
4.0
 • 189 Interviews
Blue Star Interview Questions
4.1
 • 158 Interviews
Schlumberger Interview Questions
3.9
 • 136 Interviews
Voltas Interview Questions
4.0
 • 129 Interviews
View all
Kent plc Mechanical Technician Salary
based on 5 salaries
₹1.4 L/yr - ₹6 L/yr
29% less than the average Mechanical Technician Salary in India
View more details

Kent plc Mechanical Technician Reviews and Ratings

based on 2 reviews

5.0/5

Rating in categories

5.0

Skill development

5.0

Work-life balance

5.0

Salary

5.0

Job security

5.0

Company culture

5.0

Promotions

5.0

Work satisfaction

Explore 2 Reviews and Ratings
Electrical Engineer
12 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Instrumentation Technician
12 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Hvac Technician
9 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Electrical Technician
8 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Electrical Technician
7 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Kent plc with

Eureka Forbes

3.7
Compare

Havells

4.0
Compare

Blue Star

4.1
Compare

Voltas

4.0
Compare
Did you find this page helpful?
Yes No
write
Share an Interview
Rate your experience using AmbitionBox
Terrible
Terrible
Poor
Poor
Average
Average
Good
Good
Excellent
Excellent