Upload Button Icon Add office photos

Filter interviews by

Gas Arabian Services Mechanical Technician Interview Questions and Answers

Updated 7 Dec 2022

Gas Arabian Services Mechanical Technician Interview Experiences

1 interview found

I applied via Recruitment Consulltant and was interviewed in Jun 2022. There was 1 interview round.

Round 1 - One-on-one 

(5 Questions)

  • Q1. 1) What is process before starting Excenger work ?
  • Ans. 

    The process before starting Exchanger work involves several steps.

    • Inspecting the exchanger for any damages or leaks

    • Checking the pressure and temperature gauges

    • Ensuring all valves and controls are in the correct position

    • Verifying that the exchanger is properly isolated from the system

    • Performing a safety check and obtaining necessary permits

    • Preparing the necessary tools and equipment for the work

    • Following proper lockout/...

  • Answered by AI
  • Q2. Any emergency alarm in the plant what u do?
  • Ans. 

    When an emergency alarm goes off in the plant, I would immediately assess the situation, follow the established emergency protocols, and take appropriate actions to ensure the safety of personnel and equipment.

    • Quickly assess the nature of the emergency alarm

    • Follow the established emergency protocols and procedures

    • Notify the relevant personnel and authorities

    • Evacuate the area if necessary

    • Take appropriate actions to miti...

  • Answered by AI
  • Q3. Stop my work and secure my tools come down and go to the assembly point.
  • Q4. What is process of open any joint ?
  • Ans. 

    The process of opening any joint involves loosening the fasteners and separating the two parts of the joint.

    • Identify the type of joint and the fasteners used

    • Use appropriate tools to loosen the fasteners

    • Separate the two parts of the joint carefully

    • Inspect the joint for any damage or wear

    • Clean and lubricate the joint before reassembling

  • Answered by AI
  • Q5. First aisolate related line,and closed the valve.and start remove from down bolt.

Interview Preparation Tips

Topics to prepare for Gas Arabian Services Mechanical Technician interview:
  • Static equipments
Interview preparation tips for other job seekers - Gas Arabian is nice company and excellent management. Beacuse I was worked there. This company is good communicate on the work site.

Interview questions from similar companies

Interview experience
4
Good
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
-

I applied via Approached by Company and was interviewed in Sep 2024. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. What is DOC & mufflers
  • Ans. 

    DOC stands for Diesel Oxidation Catalyst, a device used to reduce harmful emissions in diesel engines. Mufflers are components that reduce noise produced by the engine.

    • DOC is a device used in diesel engines to convert harmful pollutants into less harmful substances.

    • Mufflers are components in the exhaust system that reduce noise produced by the engine.

    • DOCs are commonly used in vehicles to meet emission standards.

    • Muffler...

  • Answered by AI
  • Q2. What is starting & presser pipe
  • Ans. 

    Starting & presser pipe is a term used in mechanical engineering to refer to pipes used for starting and pressurizing systems.

    • Starting pipe is used to supply initial fluid or gas to start a system

    • Presser pipe is used to maintain pressure in a system

    • Examples include starting and presser pipes in hydraulic systems or pneumatic systems

  • Answered by AI

Interview Preparation Tips

Topics to prepare for Escorts Kubota Limited Mechanical Technician interview:
  • Technical Skills
Interview preparation tips for other job seekers - Use online tools to optimize your resume and link in profile
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Online phone number
  • Q2. By phone my self by XXXXX
Round 3 - Technical 

(2 Questions)

  • Q1. Video call phone number
  • Q2. XXXXX by myself

Interview Preparation Tips

Interview preparation tips for other job seekers - Hr sir

I applied via Campus Placement and was interviewed in Jun 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Mechanical Mentenac technician
  • Q2. Mechanical Mentenac Tenchician

Interview Preparation Tips

Interview preparation tips for other job seekers - Mechanical Mentenace mechanical hevi Eukument job metal healing
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via Approached by Company and was interviewed in Nov 2024. There were 3 interview rounds.

Round 1 - Aptitude Test 
Round 2 - Aptitude Test 
Round 3 - Technical 

(3 Questions)

  • Q1. What is your name? My name is Angara Raviteja.
  • Q2. What are your qualifications? I have completed the Government polytechnic in diploma mechanical engineering.
  • Q3. What is MS and SS?
  • Ans. 

    MS stands for Mild Steel and SS stands for Stainless Steel.

    • MS (Mild Steel) is a type of carbon steel with low carbon content and is commonly used in construction.

    • SS (Stainless Steel) is a type of steel alloy with a minimum of 10.5% chromium content, known for its corrosion resistance.

    • SS is often used in kitchen appliances, surgical instruments, and industrial equipment.

    • MS is used in structural applications, automotive

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Hard work and panchavati
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed in Dec 2024. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. Is code of Ms pipeline .?
  • Q2. What is a micrometre.?

Interview Preparation Tips

Topics to prepare for Apco Infratech Diploma Mechanical Engineer interview:
  • Micrometre
  • Quality Tools
Interview preparation tips for other job seekers - Mechanical engineering
Interview experience
5
Excellent
Difficulty level
-
Process Duration
2-4 weeks
Result
Selected Selected

I was interviewed in Nov 2024.

Round 1 - Technical 

(2 Questions)

  • Q1. According to machinery hem
  • Q2. Hydraulic
Round 2 - Technical 

(2 Questions)

  • Q1. Heavy Arth movers equipment
  • Q2. Engine, transmission
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed in Nov 2024. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. What is the mechanism?
  • Ans. 

    The mechanism refers to the physical or mechanical system that performs a specific function or task.

    • Mechanisms are often made up of various components such as gears, levers, pulleys, and linkages.

    • They are designed to convert input forces and motion into desired output forces and motion.

    • Examples include a car engine, a door lock, a bicycle chain, and a robotic arm.

  • Answered by AI
  • Q2. What is the structure of an assembly?
  • Ans. 

    An assembly is a collection of parts or components put together to form a complete structure or machine.

    • An assembly typically consists of multiple parts or components that are designed to fit together in a specific way.

    • Each part in an assembly has a specific function and contributes to the overall functionality of the structure.

    • Assemblies can range from simple structures like a chair to complex machines like a car or a...

  • Answered by AI

Interview Preparation Tips

Topics to prepare for L&T Construction Mechanical Engineer interview:
  • Assembly, erection, mechanism
Interview preparation tips for other job seekers - Assembly, structure drawing
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Not Selected

I was interviewed in Aug 2024.

Round 1 - Technical 

(2 Questions)

  • Q1. What means of tyre size
  • Ans. 

    Tyre size refers to the dimensions of a tire, including width, aspect ratio, and diameter.

    • Tyre size is typically expressed as a series of numbers and letters on the sidewall of the tire.

    • The first number represents the width of the tire in millimeters.

    • The second number is the aspect ratio, which is the height of the tire's cross-section as a percentage of the width.

    • The final number is the diameter of the wheel that the ...

  • Answered by AI
  • Q2. Diffrence between pan mixer and twin shaft mixer
  • Ans. 

    Pan mixer is a stationary mixer with a single shaft while twin shaft mixer has two horizontal shafts rotating in opposite directions.

    • Pan mixer has a single shaft while twin shaft mixer has two horizontal shafts

    • Twin shaft mixer provides better mixing efficiency and homogeneity compared to pan mixer

    • Pan mixer is suitable for smaller batches while twin shaft mixer is used for larger production volumes

  • Answered by AI
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Group Discussion 

Technical round and one by one person having questing and forward to answers

Round 2 - Technical 

(2 Questions)

  • Q1. Regarding piping
  • Q2. I have done piping also do then

Gas Arabian Services Interview FAQs

How many rounds are there in Gas Arabian Services Mechanical Technician interview?
Gas Arabian Services interview process usually has 2 rounds. The most common rounds in the Gas Arabian Services interview process are One-on-one Round and Resume Shortlist.
What are the top questions asked in Gas Arabian Services Mechanical Technician interview?

Some of the top questions asked at the Gas Arabian Services Mechanical Technician interview -

  1. 1) What is process before starting Excenger wor...read more
  2. What is process of open any join...read more
  3. Stop my work and secure my tools come down and go to the assembly poi...read more

Tell us how to improve this page.

Interview Questions from Similar Companies

L&T Construction Interview Questions
4.0
 • 696 Interviews
Tata Projects Interview Questions
4.3
 • 400 Interviews
KEC International Interview Questions
4.1
 • 287 Interviews
Tata Technologies Interview Questions
3.7
 • 251 Interviews
TCE Interview Questions
3.8
 • 240 Interviews
View all
Gas Arabian Services Mechanical Technician Salary
based on 9 salaries
₹9 L/yr - ₹18.5 L/yr
172% more than the average Mechanical Technician Salary in India
View more details

Gas Arabian Services Mechanical Technician Reviews and Ratings

based on 9 reviews

4.7/5

Rating in categories

4.9

Skill development

4.9

Work-Life balance

5.0

Salary & Benefits

4.7

Job Security

4.7

Company culture

4.9

Promotions/Appraisal

5.0

Work Satisfaction

Explore 9 Reviews and Ratings
Mechanical Engineer
9 salaries
unlock blur

₹9.6 L/yr - ₹20 L/yr

Mechanical Technician
9 salaries
unlock blur

₹9 L/yr - ₹18.5 L/yr

Shop Supervisor
7 salaries
unlock blur

₹4.3 L/yr - ₹5.3 L/yr

Senior Sales Engineer
6 salaries
unlock blur

₹7 L/yr - ₹22 L/yr

Sales Engineer
5 salaries
unlock blur

₹9 L/yr - ₹18 L/yr

Explore more salaries
Compare Gas Arabian Services with

Oilmax Energy

4.2
Compare

Alphageo

3.5
Compare

Quippo Oil & Gas Infrastructure

3.9
Compare

Deep Industries

3.4
Compare

Calculate your in-hand salary

Confused about how your in-hand salary is calculated? Enter your annual salary (CTC) and get your in-hand salary
Did you find this page helpful?
Yes No
write
Share an Interview