Filter interviews by
Top trending discussions
I applied via Naukri.com and was interviewed in Jun 2022. There was 1 interview round.
The losses in transformers include copper losses and iron losses.
Copper losses occur due to the resistance of the transformer windings.
Iron losses, also known as core losses, occur due to hysteresis and eddy currents in the transformer core.
Copper losses can be reduced by using larger conductor sizes or improving the cooling system.
Iron losses can be minimized by using high-quality magnetic materials and optimizing the...
There are several types of substations, including transmission, distribution, collector, and switching substations.
Transmission substations are used to step up or down voltage for long-distance transmission.
Distribution substations are used to distribute power to local areas.
Collector substations are used to collect power from renewable energy sources.
Switching substations are used to switch power between different tra...
There are two types of substations - indoor and outdoor substations.
Indoor substations are located inside buildings or structures.
Outdoor substations are located outside and are exposed to the elements.
Indoor substations are typically smaller and require less maintenance.
Outdoor substations are larger and require more maintenance due to exposure to weather conditions.
Both types of substations play a crucial role in the
The motors used in fans are typically single-phase induction motors.
Fans typically use single-phase induction motors.
These motors are designed to operate on a single-phase AC power supply.
They are commonly used in ceiling fans, table fans, and pedestal fans.
The motor rotates the fan blades, creating airflow and cooling effect.
Some fans may also use brushless DC motors for improved energy efficiency.
posted on 15 Jun 2021
I applied via Referral and was interviewed before Jun 2020. There was 1 interview round.
The maximum range of voltage rating for belted cables varies depending on the specific application and industry standards.
The voltage rating of belted cables can range from low voltage (LV) to high voltage (HV).
LV belted cables typically have a voltage rating of up to 1 kV.
HV belted cables can have voltage ratings ranging from 1 kV to several hundred kilovolts (kV).
The exact voltage rating of belted cables is determine...
Conventional flow assumes charges flow from positive to negative terminals.
Conventional flow is based on the assumption that current flows from positive to negative terminals.
This convention is used in electrical engineering and circuit analysis.
For example, in a battery-powered circuit, conventional flow assumes that electrons flow from the positive terminal of the battery to the negative terminal.
The torque a synchronous motor can develop depends on its size and design.
The torque is directly proportional to the current supplied to the motor.
The torque also depends on the strength of the magnetic field produced by the rotor.
Larger synchronous motors can develop higher torque than smaller ones.
For example, a 500 kW synchronous motor can develop a torque of around 1500 Nm.
The torque can also be affected by factors
Cable protectors can safeguard cables against mechanical injury.
Cable protectors can be used to cover and shield cables from physical damage.
Flexible conduits or cable trays can be installed to provide a protective pathway for cables.
Using cable ties or clamps to secure cables in place can prevent them from being accidentally pulled or strained.
Applying cable armor or armored cables can provide additional protection ag...
The earth wire or ground wire is typically made of copper or aluminum.
The earth wire is an essential safety component in electrical systems.
It is used to provide a path for electrical current to safely discharge into the ground.
Copper is commonly used for earth wires due to its excellent conductivity and corrosion resistance.
Aluminum is also used in some cases, especially for overhead power lines.
The earth wire is usua...
The average resistance of a human body is approximately 1,000 ohms.
The resistance of a human body can vary depending on factors such as skin moisture, contact area, and voltage applied.
Dry skin has higher resistance compared to moist skin.
The resistance can be affected by the presence of sweat, water, or other conductive substances on the skin.
The resistance decreases when the contact area between the body and a conduc...
I applied via Walk-in and was interviewed before Aug 2021. There was 1 interview round.
I applied via Company Website and was interviewed in Mar 2021. There were 3 interview rounds.
I applied via Naukri.com and was interviewed before Jun 2020. There was 1 interview round.
MCB components are typically made of materials such as copper, silver, thermoplastics, and ceramics.
Copper is commonly used for conducting electricity in MCBs.
Silver is sometimes used as a contact material for better conductivity.
Thermoplastics like polyamide are used for insulation and housing of MCB components.
Ceramics are used for arc chutes to extinguish the arc when the MCB trips.
Other materials like steel, brass,...
I am satisfied with management's view on cost cutting as they have implemented effective strategies to reduce expenses without compromising quality.
Management has successfully implemented cost cutting measures without affecting the quality of products or services
They have involved employees in the cost cutting process to gather valuable insights and suggestions
Management regularly reviews and adjusts cost cutting strat...
I applied via Campus Placement and was interviewed before Apr 2019. There was 1 interview round.
I applied via Referral and was interviewed before Aug 2020. There were 3 interview rounds.
I am currently working as a Team Lead in a retail store, responsible for managing daily operations and supervising staff.
Manage and oversee the store's daily operations
Supervise and train staff members
Ensure excellent customer service
Monitor inventory levels and order supplies
Handle customer complaints and resolve issues
Create work schedules and assign tasks
Conduct performance evaluations
Collaborate with other departme
I have contributed to the company by implementing efficient processes, improving team performance, and driving revenue growth.
Implemented a new inventory management system that reduced stockouts by 50%
Developed and executed a training program that improved employee productivity by 20%
Introduced a customer loyalty program that increased repeat sales by 30%
Led a cross-functional team to successfully launch a new product
posted on 24 Apr 2021
I applied via Naukri.com and was interviewed before Apr 2020. There were 3 interview rounds.
based on 1 review
Rating in categories
Assistant Manager
205
salaries
| ₹5 L/yr - ₹12.5 L/yr |
Senior Engineer
168
salaries
| ₹4.1 L/yr - ₹9 L/yr |
Senior Executive
109
salaries
| ₹3.5 L/yr - ₹8 L/yr |
Electrical Engineer
97
salaries
| ₹3.2 L/yr - ₹6.8 L/yr |
Deputy Manager
85
salaries
| ₹7.2 L/yr - ₹15 L/yr |
Havells
Polycab Wires
CG Power and Industrial Solutions
C&S Electric