Filter interviews by
Paper is easy based on mechanical core subjects it is and basic fundamentals ask in question
Least count of a measuring instrument is the smallest change in the measured quantity that can be detected by the instrument.
Least count is determined by the smallest division on the scale of the instrument.
It is important for accurate measurements as it determines the precision of the instrument.
For example, a ruler with smallest division of 1 mm has a least count of 1 mm.
Another example is a Vernier caliper with smal...
I applied via Company Website and was interviewed in May 2021. There were 4 interview rounds.
Air conditioner cycle is the process of removing heat and moisture from indoor air to improve comfort.
Air conditioner cycle involves four main components: compressor, condenser, expansion valve, and evaporator.
The compressor compresses the refrigerant gas, which then flows to the condenser where it releases heat.
The expansion valve reduces the pressure of the refrigerant, causing it to cool down and flow to the evapora...
Young modulus is a measure of a material's stiffness and its ability to resist deformation under stress.
Young modulus is also known as modulus of elasticity.
It is defined as the ratio of stress to strain in a material under tension or compression.
It is a material property and varies for different materials.
It is used to predict how a material will behave under stress.
For example, steel has a higher young modulus than r...
A radiator is a heat exchanger used to transfer thermal energy from one medium to another for cooling purposes. A condenser is a device used to condense a substance from its gaseous to its liquid state.
Radiators are commonly used in automobiles to cool the engine by transferring heat from the coolant to the air.
Condensers are used in air conditioning systems to condense refrigerant from a gas to a liquid state.
Both rad...
1mm is equal to 1000 microns.
1mm = 1000 microns
Micron is a unit of length equal to one millionth of a meter
Used in measuring the size of particles in air or water
I applied via Referral and was interviewed in Nov 2021. There were 3 interview rounds.
The past company name is XYZ Corporation.
XYZ Corporation was a multinational engineering firm.
They specialized in architectural drafting and design.
The company had a strong reputation for delivering high-quality projects on time and within budget.
They worked on various commercial and residential projects, including office buildings, shopping malls, and housing complexes.
XYZ Corporation had a team of skilled draftsmen w...
KCPL interview questions for popular designations
The cable size required for a 10 hp motor depends on the voltage and current rating of the motor.
The cable size should be selected based on the motor's full load current (FLC) and the voltage rating.
For a 10 hp motor, the FLC would typically be around 15-20 Amps.
A common cable size for a 10 hp motor operating at 415V could be 4 sq mm cable.
I have a strong understanding of electrical systems and am capable of troubleshooting and problem-solving in this area.
I have a degree in Electrical Engineering
I have completed multiple projects involving electrical systems
I have experience working with electrical equipment and tools
I have a good understanding of electrical codes and regulations
posted on 15 Jul 2024
I applied via Approached by Company and was interviewed in Jun 2024. There was 1 interview round.
posted on 7 Mar 2024
I applied via Campus Placement and was interviewed in Feb 2024. There were 2 interview rounds.
One hour aptitude test based on the mathematics ,logical reasoning.
It's fine and easy , nothing hard question ,all are related to topics
The next number in the series is 42.
The series is increasing by 4, 6, 8, 10, ...
Each number is the sum of the previous number and the next odd number.
2 + 4 = 6, 6 + 6 = 12, 12 + 8 = 20, 20 + 10 = 30, so the next number is 30 + 12 = 42.
I applied via Approached by Company and was interviewed before Dec 2016. There was 1 interview round.
I applied via Walk-in and was interviewed in Jan 2019. There were 3 interview rounds.
MICRO is a term commonly used in the technology industry to refer to microservices architecture.
MICRO stands for Microservices Infrastructure and Coordination for Open Research Environments.
It is an open-source framework for building microservices-based applications.
MICRO provides tools and libraries for service discovery, load balancing, and inter-service communication.
It promotes the use of small, independent service...
Order coming through email is a common practice in modern business.
Email orders should be treated with the same level of importance as other orders.
It is important to have a system in place to track and process email orders.
Email orders should be confirmed with the customer to avoid any misunderstandings.
Examples of businesses that commonly receive email orders include online retailers and service providers.
based on 4 interviews
Interview experience
Java Developer
30
salaries
| ₹3 L/yr - ₹4.8 L/yr |
Site Engineer
17
salaries
| ₹2.4 L/yr - ₹3.2 L/yr |
Civil Site Engineer
15
salaries
| ₹1.8 L/yr - ₹6 L/yr |
Production Supervisor
9
salaries
| ₹2.7 L/yr - ₹4.5 L/yr |
Highway Engineer
7
salaries
| ₹2.2 L/yr - ₹4.3 L/yr |
Pittie Group
Ushodaya Enterprises
China State Construction Engineering Corporation
Arihant Publications