Katerra Junior Planning Engineer Interview Questions and Answers

Residence: New York, Qualification: Bachelor's degree in Civil Engineering, Hobbies: Reading, Experience: 5 years in planning and scheduling

• Residence: New York

• Qualification: Bachelor's degree in Civil Engineering

• Hobbies: Reading

• Experience: 5 years in planning and scheduling

M stands for 'Mix' in M20.

• M20 is a designation for a concrete mix with a compressive strength of 20 megapascals (MPa).

• The 'M' in M20 represents the word 'Mix', indicating that it is a mix of cement, sand, and aggregate.

• The number following 'M' in M20 denotes the compressive strength of the concrete mix.

• Different grades of concrete have different compressive strength requirements, and the 'M' designation helps in identi

Curing is necessary for concrete to ensure proper hydration and strength development.

• Curing prevents moisture loss from the concrete, allowing it to maintain its desired water-cement ratio.

• It helps in reducing shrinkage and cracking by providing a controlled environment for the concrete to cure.

• Curing promotes the formation of calcium silicate hydrate (CSH) gel, which contributes to the strength and durability of concr...read more

Water is added to concrete after casting to maintain moisture content and achieve early strength and resist creep formation.

• Adding water to concrete after casting helps to prevent excessive moisture loss.

• Maintaining moisture content in concrete is important for proper hydration of cement particles.

• Watering concrete can also help in reducing shrinkage and cracking.

• By providing moisture, the concrete gains strength faste...read more

The steps involved in concreting include site preparation, formwork, reinforcement, mixing, pouring, leveling, finishing, and curing.

• Site preparation involves clearing the area and ensuring proper drainage.

• Formwork is constructed to shape and support the concrete.

• Reinforcement is placed to provide strength to the concrete structure.

• Concrete ingredients are mixed in the correct proportions.

• The mixed concrete is poured i...read more

The allowable height for free fall for concrete depends on several factors.

• The allowable height for free fall for concrete is typically specified by the project specifications or industry standards.

• The height is influenced by factors such as the type of concrete mix, slump value, and the presence of reinforcing steel.

• For example, for normal weight concrete with a slump of 3 to 4 inches and no reinforcing steel, the all...read more

Segregation is the separation of coarse and fine particles in concrete mix, while bleeding is the upward movement of water in fresh concrete.

• Segregation occurs when the coarse aggregates settle down due to gravity, resulting in a non-uniform distribution of particles in the mix.

• Bleeding happens when excess water in the concrete mix rises to the surface, leaving behind a layer of water on top.

• Segregation can lead to a d...read more

Bleeding and segregation are common issues in concrete construction.

• Bleeding occurs when excess water in the concrete mixture rises to the surface, leaving behind a layer of water.

• Segregation happens when the coarse aggregates separate from the rest of the concrete mixture.

• Both bleeding and segregation can negatively impact the strength and durability of the concrete.

• Proper mix design, adequate compaction, and appropri...read more

Primavera P6 is a project management software used for planning, scheduling, and controlling projects.

• Primavera P6 is widely used in industries such as construction, engineering, and manufacturing.

• It allows users to create project schedules, allocate resources, track progress, and analyze project performance.

• The software helps in optimizing project plans, identifying critical paths, and managing project risks.

• Users can...read more

Production norms for a 36" diameter pipeline are determined based on factors such as material, pressure, and flow rate.

• Production norms for a 36" diameter pipeline will vary depending on the material of the pipeline (e.g. steel, PVC), the pressure it needs to withstand, and the desired flow rate.

• Factors such as the type of fluid being transported, environmental conditions, and regulatory requirements also play a role i...read more

Fabrication norms for spools up to 36" diameter involve specific welding procedures, material specifications, and quality control measures.

• Welding procedures must adhere to ASME standards for pressure piping.

• Material specifications should meet project requirements and industry standards.

• Quality control measures include non-destructive testing (NDT) such as radiography and ultrasonic testing.

• Spools may require post-weld...read more

I have extensive experience in supervising multidisciplinary construction activities, ensuring coordination and efficiency.

• Experience in overseeing various construction activities such as civil, mechanical, electrical, and structural work

• Ability to coordinate with different teams and stakeholders to ensure smooth progress of projects

• Knowledge of construction regulations and standards to ensure compliance

• Strong communic...read more