Jindal Steel and Power Mechanical Operations and Maintenance Engineer Interview Questions and Answers

Q1. Any questions in mechanical supervisor
Add your answer
Q2. Any questions in mechanical field
Add your answer

Q1. What is your qualification?
Ans. 
Bachelor's degree in Mechanical Engineering with 5 years of experience in maintenance and troubleshooting of mechanical systems.
• Bachelor's degree in Mechanical Engineering

• 5 years of experience in maintenance and troubleshooting

• Proficient in analyzing mechanical systems and implementing solutions
Answered by AI
Add your answer
Q2. Are you willing to work 12 hours?
Ans. 
Yes, I am willing to work 12 hours as needed for the job.
• I am committed to meeting the demands of the job, including working long hours when necessary.

• I understand the importance of completing tasks on time and am willing to put in the extra hours to ensure that.

• I have previous experience working long shifts and am comfortable with the schedule.

• I am dedicated to my work and will prioritize the job requirements over per
Answered by AI
Add your answer

Q1. What is the use of lubricant in roling mill
Ans. 
Lubricant in rolling mills reduces friction between metal surfaces, prevents wear and tear, and improves efficiency.
• Lubricant reduces friction between metal surfaces in rolling mills

• Prevents wear and tear on machinery

• Improves efficiency by reducing energy consumption

• Helps in cooling the metal during the rolling process

• Examples: oil-based lubricants, grease, graphite-based lubricants
Answered by AI
Add your answer
Q2. What are the major cause of roll broken
Ans. 
The major causes of roll breakage in maintenance engineering include material defects, improper setup, excessive tension, and foreign objects.
• Material defects such as weak spots or impurities can weaken the roll and lead to breakage.

• Improper setup or alignment of the roll can cause uneven stress distribution and eventual breakage.

• Excessive tension on the roll can exceed its load-bearing capacity and cause it to break.

• F...read more
Answered by AI
Add your answer
Q3. What is cause of rolling mill bearing broken
Ans. 
The main causes of rolling mill bearing breakage are lack of lubrication, contamination, overloading, and misalignment.
• Lack of lubrication can lead to increased friction and heat generation, causing the bearing to fail prematurely.

• Contamination from dirt, debris, or water can accelerate wear and tear on the bearing surfaces.

• Overloading the bearing beyond its capacity can cause excessive stress and lead to failure.

• Misal...read more
Answered by AI
Add your answer
Q4. Compressor overhead cause
Ans. 
Compressor overhead cause can be due to various factors such as high discharge pressure, low suction pressure, dirty filters, or worn out components.
• High discharge pressure can lead to overheating of the compressor.

• Low suction pressure can cause the compressor to work harder and overheat.

• Dirty filters can restrict airflow and cause the compressor to overheat.

• Worn out components such as valves or seals can lead to ineff
Answered by AI
Add your answer
Q5. How to measure wire rope condition
Ans. 
Wire rope condition can be measured by visual inspection, non-destructive testing, and load testing.
• Visual inspection for signs of wear, corrosion, broken wires, and distortion

• Non-destructive testing methods like magnetic particle inspection, ultrasonic testing, and dye penetrant testing

• Load testing to assess the strength and integrity of the wire rope under working conditions
Answered by AI
Add your answer
Q6. Lubricant chemicals property
Add your answer

Q1. Working principal of pump
Ans. 
Pumps work by creating a pressure difference to move fluid from one place to another.
• Pumps use mechanical energy to increase the pressure of a fluid and move it through a system

• They can be classified into different types such as centrifugal pumps, positive displacement pumps, etc.

• The working principle involves the conversion of mechanical energy into hydraulic energy

• Examples include water pumps in buildings, fuel pumps
Answered by AI
View 1 more answer
Q2. What is working principal of cooling tower
Ans. 
Cooling towers work on the principle of evaporative cooling to remove heat from a process or building.
• Cooling towers use water as a cooling medium to absorb heat from a process or building.

• The hot water is pumped to the top of the tower and distributed over the fill media.

• As the water flows over the fill media, some of it evaporates, taking away heat and cooling the rest of the water.

• The cooled water is then collected ...read more
Answered by AI
Add your answer
Q3. Pollution bag filter specifications
Ans. 
Pollution bag filter specifications include material type, filtration efficiency, airflow capacity, and pressure drop.
• Material type: Bag filters can be made of various materials such as polyester, polypropylene, or fiberglass.

• Filtration efficiency: This indicates the percentage of particles the filter can capture. Higher efficiency filters are more effective but may have higher pressure drops.

• Airflow capacity: The maxi...read more
Answered by AI
Add your answer
Q4. Softner water parameter
Add your answer
Q5. What is the formula of centrifugal pump head
Ans. 
The formula for centrifugal pump head is H = (Q * SG) / (3.14 * D^2 * 2.31)
• Head (H) is calculated using the flow rate (Q), specific gravity (SG), and diameter of the impeller (D)

• The formula is derived from the basic equation for head in a centrifugal pump

• Example: H = (100 gpm * 1.0) / (3.14 * 0.5^2 * 2.31) = 45.75 ft
Answered by AI
Add your answer

Reasoning, Technician questions.

Q1. Tell me about your self
Ans. 
I am a dedicated and detail-oriented Junior Engineer with a strong background in mechanical maintenance.
• Graduated with a degree in Mechanical Engineering

• Completed internships at XYZ Company, gaining hands-on experience in maintenance procedures

• Proficient in using CAD software for designing mechanical components

• Strong problem-solving skills and ability to work well in a team
Answered by AI
Add your answer
Q2. Why choose mechanical engineering
Ans. 
I chose mechanical engineering because of my passion for designing and building machines that improve people's lives.
• Passion for designing and building machines

• Interest in problem-solving and innovation

• Opportunities for diverse career paths

• Ability to work on projects that have a real-world impact
Answered by AI
Add your answer

Q1. Types of CNC machine?
Ans. 
CNC machines are automated milling machines that can perform various tasks with precision and accuracy.
• Types of CNC machines include milling machines, lathes, plasma cutters, and routers.

• Each type of CNC machine is designed for specific tasks such as cutting, drilling, shaping, and finishing.

• CNC machines can be categorized based on their axis configuration, such as 3-axis, 4-axis, and 5-axis machines.

• Some examples of p...read more
Answered by AI
Add your answer
Q2. What is electrical safety?
Ans. 
Electrical safety refers to practices and precautions taken to prevent electrical hazards and accidents.
• Ensuring all electrical equipment is properly maintained and inspected regularly

• Using appropriate personal protective equipment (PPE) when working with electricity

• Following proper lockout/tagout procedures to de-energize equipment before maintenance

• Training employees on electrical safety protocols and procedures

• Imple...read more
Answered by AI
Add your answer

Fitter technician apprentice at iocl panipat

Q1. What do you enjoy most about working as a Fitter
Add your answer
Q2. Working with the my hands and having a more physical jobs where I can move arround and fix things
Add your answer

Discuss For Pellet plant like Traveling grate,Kiln, Cooler, Balling disc

Q1. Any type of questions pellet
Add your answer