i
Intertek
Filter interviews by
I applied via Walk-in
Top trending discussions
I applied via Walk-in
About cash & related work
Handling an ATM machine requires basic knowledge of its functions and safety precautions.
Always cover the keypad when entering your PIN
Be aware of your surroundings and avoid using the ATM at night or in secluded areas
Check for any suspicious devices or people around the machine before using it
If the machine appears to be tampered with or malfunctioning, do not use it and report it to the bank
Remember to take your card
Work on daily basis assign
I applied via Naukri.com and was interviewed in Oct 2021. There were 4 interview rounds.
I applied via Walk-in and was interviewed before Oct 2021. There were 2 interview rounds.
I applied via Campus Placement and was interviewed in Apr 2022. There were 3 interview rounds.
Testing is a process of evaluating the performance or characteristics of a substance or system.
Testing involves conducting experiments or analyses to gather data and draw conclusions.
It is used to ensure the quality, safety, and effectiveness of products or processes.
Chemical testing may involve analyzing the composition, purity, or properties of substances.
Testing methods can include physical, chemical, or biological ...
Environmental testing is crucial for ensuring the safety of our surroundings and preventing harm to human health.
Identifies potential hazards and risks to human health and the environment
Helps in developing and implementing effective pollution control measures
Ensures compliance with environmental regulations and standards
Examples include testing for air and water quality, soil contamination, and hazardous waste disposa...
AFR stands for Air Fuel Ratio, a critical parameter in combustion processes.
AFR is the ratio of air to fuel in an internal combustion engine.
It is measured using a device called an oxygen sensor.
The ideal AFR varies depending on the type of fuel and engine.
A lean AFR (more air, less fuel) can improve fuel efficiency but may cause engine damage.
A rich AFR (more fuel, less air) can improve performance but may increase em...
AFR testing is a process of measuring the air-to-fuel ratio in an engine to optimize its performance and reduce emissions.
AFR stands for Air-Fuel Ratio
It is commonly used in automotive and aviation industries
The ideal AFR varies depending on the type of fuel and engine
AFR testing can be done using a wideband oxygen sensor or a gas analyzer
I know various parameters related to chemistry such as temperature, pressure, concentration, pH, etc.
Temperature
Pressure
Concentration
pH
Molarity
Molality
Density
Viscosity
Refractive index
I applied via Approached by Company and was interviewed in Jun 2022. There was 1 interview round.
I applied via Naukri.com and was interviewed before Apr 2023. There were 2 interview rounds.
Material specifications for piping, forgings, fittings, tubes, and fasteners for MS materials include ASTM standards and specific grades.
ASTM A53/A53M - Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless
ASTM A105/A105M - Standard Specification for Carbon Steel Forgings for Piping Applications
ASTM A234/A234M - Standard Specification for Piping Fittings of Wrought Carbon Steel ...
SS316 has higher corrosion resistance and strength compared to SS304.
SS316 contains molybdenum which enhances its corrosion resistance, while SS304 does not.
SS316 is more suitable for use in harsh environments like marine applications, while SS304 is more commonly used in indoor settings.
SS316 has higher tensile strength and creep strength than SS304.
SS316L has lower carbon content than SS316, making it more corrosion resistant and suitable for welding applications.
SS316L has lower carbon content (0.03% max) compared to SS316 (0.08% max)
SS316L is more corrosion resistant due to the lower carbon content
SS316L is commonly used in welding applications where post-weld annealing is not possible
SS316 is more commonly used in applications where higher strength is required
Refer to ASME Section II Part A for remaining chemical composition of SA-516 Gr. 70 plates
Refer to ASME Section II Part A for detailed chemical composition
Check the material test report (MTR) for specific chemical composition
Consult with the manufacturer or supplier for any additional information
Questions related to Standard reference, codes, welding and inspection
I applied via Naukri.com and was interviewed before Aug 2022. There were 2 interview rounds.
based on 3 interviews
Interview experience
based on 3 reviews
Rating in categories
Inspection Engineer
318
salaries
| ₹0 L/yr - ₹0 L/yr |
Lab Technician
171
salaries
| ₹0 L/yr - ₹0 L/yr |
Quality Engineer
163
salaries
| ₹0 L/yr - ₹0 L/yr |
Chemist
65
salaries
| ₹0 L/yr - ₹0 L/yr |
Senior Engineer
58
salaries
| ₹0 L/yr - ₹0 L/yr |
SGS
Bureau Veritas
TÜV NORD
DNV GL