Hindustan Motors Interview Questions, Process, and Tips

Apne ap par bharosa aur attitude ke sath kam karna

While working, focus on your kaam

Q1. What are the positive aspects of the job?
Add your answer
Q2. Technical masino ka sahi tarike se karna
Add your answer

Q1. What should be done if the air conditioning unit is not cooling and water is overflowing?
Ans. 
Check for clogged air filters, condensate drain line, and refrigerant levels. Call a professional if needed.
• Check air filters for clogs and replace if necessary

• Inspect condensate drain line for blockages and clear if needed

• Check refrigerant levels and call a professional if low

• Ensure the thermostat is set correctly and the unit is not overheating
Answered by AI
Add your answer
Q2. Ac wire lose
Ans. 
Ac wire feet protectly
Answered by Surya Kushwaha
Add your answer
Q3. Ac gas lik Ac gas use
Ans. 
AC gas is used in air conditioning systems to cool the air inside a building or vehicle.
• AC gas is a refrigerant that absorbs heat from the air inside the system and releases it outside.

• Common AC gases include R-410A, R-22, and R-134a.

• AC gas leaks can lead to decreased cooling efficiency and potential harm to the environment.

• Regular maintenance and proper handling of AC gas are important for optimal performance.
Answered by AI
View 1 more answer

Q1. Ac feet ac change ac repair Ac gas lok
Add your answer
Q2. Ac service
Add your answer

Q1. Ac gas use ac feet
Ans. 
The question is unclear and seems to be asking about the usage of AC gas in terms of feet.
• AC gas is typically measured in pounds or kilograms, not feet.

• The amount of AC gas used depends on the size of the AC unit and any leaks in the system.

• It is important to have a professional technician handle AC gas refills to prevent damage to the unit.

• Regular maintenance of the AC unit can help prevent leaks and reduce the need f
Answered by AI
Add your answer
Q2. Ac gas use
Ans. 
AC gas is used to cool the air in air conditioning systems.
• AC gas is a refrigerant used in air conditioning systems to absorb and release heat.

• Common types of AC gas include R-410A, R-22, and R-134a.

• AC gas should only be handled by trained technicians to prevent leaks and environmental damage.
Answered by AI
Add your answer

Q1. Ac feet ac gas use
Ans. 
The question is asking about the use of AC gas in air conditioning units.
• AC gas is used in air conditioning units to cool the air that is circulated throughout a building.

• The amount of AC gas used depends on the size of the unit and the frequency of use.

• Regular maintenance of AC units can help ensure efficient use of AC gas.
Answered by AI
Add your answer
Q2. Ac change ac repair
Add your answer

Q1. Ac feet ac gas use
Ans. 
The question is asking about the use of AC gas in air conditioning units.
• AC gas is used in air conditioning units to cool the air that is circulated throughout a building.

• The amount of AC gas used depends on the size of the unit and the frequency of use.

• Regular maintenance of AC units can help ensure efficient use of AC gas.
Answered by AI
Add your answer
Q2. Ac service ac change
Add your answer

Q1. Ac repair ac gas use
Ans. 
AC repair involves checking and refilling AC gas to ensure proper functioning.
• AC repair technicians check for leaks in the AC system before refilling gas.

• The type of gas used depends on the specific AC unit and its requirements.

• Properly refilling AC gas can improve cooling efficiency and extend the lifespan of the unit.
Answered by AI
Add your answer
Q2. Ac frrt
Add your answer

Any hou I will do sir

I can do work in company

Any how i do work in company maruti suzuki

Study and read polectly riting good also

I am do work profectly

I do work hardly I am do all work so I do work

Study and read writing

Nice good night friends

I am mechanical so do gime work ac technician any problem sir

Group discussion is a very important tool in addressing various problems.

Q1. What is the count of different types of vernier calipers?
Add your answer
Q2. What is the count of measurements in micrometers?
Add your answer
Q3. QQC Information About the world
Add your answer

Q1. What the Quality
Add your answer
Q2. What are the steps involved in Quality Control (QQC)?
Add your answer

Q1. What about Lubrication system & its components?
Ans. 
The lubrication system is responsible for reducing friction between moving parts in an engine by providing oil to various components.
• The main components of a lubrication system include the oil pump, oil filter, oil pan, and oil passages.

• The oil pump is responsible for circulating oil through the engine to lubricate moving parts.

• The oil filter helps remove contaminants from the oil to prevent damage to engine components...read more
Answered by AI
Add your answer
Q2. How do you diagnosis when vehicle came from overheating concern?
Ans. 
Diagnosing vehicle overheating concerns involves checking coolant levels, radiator condition, thermostat, and fan operation.
• Check coolant levels to ensure there is enough fluid to regulate engine temperature

• Inspect radiator for leaks or blockages that may be causing overheating

• Test thermostat to see if it is opening and closing properly

• Verify fan operation to ensure it is cooling the engine effectively
Answered by AI
Add your answer
Q3. What process follow for diagnosis any vehicle?
Ans. 
Diagnosing a vehicle involves a systematic process of identifying and troubleshooting issues.
• Start by gathering information from the driver about any symptoms or issues they have noticed

• Perform a visual inspection of the vehicle to look for obvious signs of damage or wear

• Use diagnostic tools such as OBD scanners to read error codes and identify specific issues

• Test drive the vehicle to observe any unusual behavior or no...read more
Answered by AI
Add your answer

Q1. What is ADAS & it's Levels
Ans. 
ADAS stands for Advanced Driver Assistance Systems. It refers to a set of safety features and technologies designed to assist drivers in the driving process.
• ADAS includes features like adaptive cruise control, lane departure warning, automatic emergency braking, and blind spot monitoring.

• There are different levels of ADAS ranging from Level 0 (no automation) to Level 5 (full automation).

• Each level represents the extent...read more
Answered by AI
Add your answer
Q2. What is differential & Transfer case, 4*4?
Ans. 
Differential & Transfer case are components of a 4*4 system in vehicles, allowing power to be distributed between front and rear wheels for better traction.
• Differential is a gear system that allows wheels to rotate at different speeds, necessary for turning

• Transfer case is a gearbox that distributes power from the transmission to both front and rear axles in a 4*4 vehicle

• 4*4 system provides better traction and stab...read more
Answered by AI
Add your answer
Q3. Aware about Connected car feathers?
Ans. 
Connected car features refer to technology that allows vehicles to communicate with each other and with external systems for improved safety, efficiency, and convenience.
• Real-time traffic updates

• Remote vehicle diagnostics

• Automatic emergency calling (eCall)

• Vehicle-to-vehicle communication

• Integration with smartphones for navigation and entertainment
Answered by AI
Add your answer
Q4. Types of Transmission use in current & pls explain?
Ans. 
Types of transmission include manual, automatic, CVT, DCT, and AMT.
• Manual transmission requires the driver to manually shift gears using a clutch pedal and gear stick.

• Automatic transmission shifts gears automatically without the need for manual input.

• CVT (Continuously Variable Transmission) uses a belt and pulley system to provide seamless gear shifts.

• DCT (Dual Clutch Transmission) uses two separate clutches for faster...read more
Answered by AI
Add your answer
Q5. What about EV & it's Technology?
Ans. 
EV technology refers to electric vehicles and their associated technologies, such as batteries and charging infrastructure.
• EV technology is rapidly advancing, with improvements in battery technology leading to longer range and faster charging times.

• Charging infrastructure is expanding to support the growing number of EVs on the road, including fast chargers and wireless charging options.

• EVs offer environmental benefits...read more
Answered by AI
Add your answer

Q1. Explain what do you understand about Automobile?
Ans. 
Automobile refers to a vehicle designed for transportation, typically with four wheels and powered by an internal combustion engine.
• Automobiles are commonly used for personal transportation, commuting, and delivery of goods.

• They come in various types such as cars, trucks, buses, and motorcycles.

• Automobiles have evolved over time with advancements in technology, safety features, and fuel efficiency.

• Examples of automobil...read more
Answered by AI
Add your answer
Q2. Explain when press the clutch pedal in manual transmission?
Ans. 
Pressing the clutch pedal in a manual transmission disengages the engine from the wheels, allowing for gear changes.
• Press the clutch pedal when shifting gears

• Press the clutch pedal when coming to a stop

• Press the clutch pedal when starting the vehicle

• Press the clutch pedal when reversing

• Press the clutch pedal when the vehicle is stationary
Answered by AI
Add your answer
Q3. Explain auto transmission solenoids ?
Ans. 
Auto transmission solenoids are electrical components that control the flow of transmission fluid to engage different gears in an automatic transmission system.
• Auto transmission solenoids are electromechanical valves that open and close to regulate the flow of transmission fluid.

• They are controlled by the vehicle's computer system to engage different gears based on driving conditions.

• Common types of auto transmission s...read more
Answered by AI
Add your answer

Q1. How to fill company manngement
Add your answer
Q2. What is the difference between an electric motor and an electric generator?
Add your answer
Q3. What tools does one need for measuring on a CNC machine in the industry,
Add your answer
Q4. How can we explain Poke Yoka, 5S, Kaizen or Safety?
Add your answer
Q5. How does hydraulic and hydraulic machine work and on what does it work
Add your answer

Q1. General questions about your past experiences and current job role
Add your answer

Q1. Technical questions about Automobiles engineering and physco testing
Add your answer