Upload Button Icon Add office photos

Filter interviews by

Hems Corporation Interview Questions and Answers

Updated 29 May 2025
Popular Designations

19 Interview questions

A Mechanical Maintenance Engineer was asked 4mo ago
Q. Tell us about the operating procedure for a stacker cum reclaimer.
Ans. 

Stacker cum reclaimer is a machine used in material handling to stack and reclaim bulk materials in industries like mining and power plants.

  • The stacker cum reclaimer is used to stack bulk materials in stockyards and reclaim them for further processing.

  • The operating procedure involves setting up the machine parameters such as speed, height, and reach.

  • The operator must ensure proper alignment of the machine with the...

View all Mechanical Maintenance Engineer interview questions
A Mechanical Maintenance Engineer was asked 4mo ago
Q. Can you provide details about a vibrating grizzly feeder?
Ans. 

A vibrating grizzly feeder is a type of equipment used in mining and construction industries to separate materials based on size and feed them into a crusher.

  • Consists of a vibrating frame with a perforated plate or screen

  • Materials are fed onto the feeder and separated by the vibrating motion

  • Helps in controlling the flow of material to the crusher

  • Commonly used in mining, quarrying, and construction applications

View all Mechanical Maintenance Engineer interview questions
A Mechanical Maintenance Engineer was asked 4mo ago
Q. What is the size of coal that has passed through a crusher?
Ans. 

The size of coal that has passed through a crusher depends on the type of crusher and the desired output size.

  • The size of coal that has passed through a crusher can vary depending on the type of crusher used (e.g. jaw crusher, cone crusher, impact crusher)

  • The output size of the crushed coal can also be adjusted by the settings of the crusher

  • Common sizes of coal after passing through a crusher range from fine dust ...

View all Mechanical Maintenance Engineer interview questions
A Mechanical Maintenance Engineer was asked 4mo ago
Q. What is the procedure for balancing a hammer during the replacement of a crusher hammer?
Ans. 

Balancing a hammer during crusher hammer replacement involves following a specific procedure to ensure proper functioning.

  • Remove the old hammer carefully to avoid damage to the crusher

  • Inspect the new hammer for any defects or damage before installation

  • Use a balancing machine to check the balance of the new hammer

  • Adjust the weight of the hammer by adding or removing material as needed

  • Ensure the hammer is properly b...

View all Mechanical Maintenance Engineer interview questions
A Site Incharge was asked
Q. Who is the customer of the Godda unit?
Ans. 

The custom of Godda unit refers to the specific practices and traditions followed by the employees and management at the Godda unit.

  • The custom of Godda unit may include daily safety briefings before starting work.

  • Employees at the Godda unit may have a tradition of celebrating birthdays or work anniversaries together.

  • There may be a specific way of reporting incidents or accidents at the Godda unit.

  • The custom of God...

View all Site Incharge interview questions
A Site Incharge was asked
Q. What is 5S?
Ans. 

5S is a methodology used for organizing a workplace for efficiency and effectiveness by identifying and storing items used, maintaining the area and items, and sustaining the new order.

  • Sort: Separate necessary items from unnecessary items.

  • Set in order: Arrange necessary items in a logical and efficient manner.

  • Shine: Clean and inspect the work area regularly.

  • Standardize: Establish standards and procedures for maint...

View all Site Incharge interview questions
A Site Incharge was asked
Q. What is the capacity of the Adani Power Jharkhand Limited power plant?
Ans. 

The capacity of Adani Power Jharkhand Limited power plant is 1600 MW.

  • The power plant has a capacity of 1600 MW.

  • It is located in Godda district of Jharkhand, India.

  • The plant uses supercritical technology for efficient power generation.

View all Site Incharge interview questions
Are these interview questions helpful?
A Site Incharge was asked
Q. What is the role of a Permanent Way Inspector (PWI)?
Ans. 

The Role of PWI (Permanent Way Inspector) is to ensure the safety and maintenance of railway tracks and infrastructure.

  • Inspecting railway tracks for defects and ensuring they meet safety standards

  • Supervising maintenance and repair work on tracks and infrastructure

  • Ensuring compliance with regulations and guidelines set by the railway authorities

  • Investigating accidents or incidents related to the railway tracks

  • Train...

View all Site Incharge interview questions
A Site Incharge was asked
Q. What is a shunt signal?
Ans. 

A shunt signal is a signal that bypasses a portion of a circuit or system.

  • Shunt signals are used to divert a portion of the main signal for specific purposes.

  • They are commonly used in electrical circuits to measure current by diverting a small portion of it through a shunt resistor.

  • Shunt signals can also be used in communication systems to bypass certain components for testing or troubleshooting purposes.

View all Site Incharge interview questions
A Site Incharge was asked
Q. What are broad gauge and narrow gauge, and what are the gauge readings for each?
Ans. 

Broad gauge and narrow gauge are types of railway track gauges. Broad gauge has a wider distance between the rails compared to narrow gauge.

  • Broad gauge has a distance of 1,676 mm (5 ft 6 in) between the rails

  • Narrow gauge has a distance of less than 1,435 mm (4 ft 8 1/2 in) between the rails

  • Examples of broad gauge railways include Indian Railways and Russian Railways

  • Examples of narrow gauge railways include the Dar...

View all Site Incharge interview questions

Hems Corporation Interview Experiences

3 interviews found

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I appeared for an interview in Jul 2024.

Round 1 - Technical 

(2 Questions)

  • Q1. What is the procedure for balancing a hammer during the replacement of a crusher hammer?
  • Ans. 

    Balancing a hammer during crusher hammer replacement involves following a specific procedure to ensure proper functioning.

    • Remove the old hammer carefully to avoid damage to the crusher

    • Inspect the new hammer for any defects or damage before installation

    • Use a balancing machine to check the balance of the new hammer

    • Adjust the weight of the hammer by adding or removing material as needed

    • Ensure the hammer is properly balanc...

  • Answered by AI
  • Q2. What is the size of coal that has passed through a crusher?
  • Ans. 

    The size of coal that has passed through a crusher depends on the type of crusher and the desired output size.

    • The size of coal that has passed through a crusher can vary depending on the type of crusher used (e.g. jaw crusher, cone crusher, impact crusher)

    • The output size of the crushed coal can also be adjusted by the settings of the crusher

    • Common sizes of coal after passing through a crusher range from fine dust to se...

  • Answered by AI
Round 2 - One-on-one 

(2 Questions)

  • Q1. Can you provide details about a vibrating grizzly feeder?
  • Ans. 

    A vibrating grizzly feeder is a type of equipment used in mining and construction industries to separate materials based on size and feed them into a crusher.

    • Consists of a vibrating frame with a perforated plate or screen

    • Materials are fed onto the feeder and separated by the vibrating motion

    • Helps in controlling the flow of material to the crusher

    • Commonly used in mining, quarrying, and construction applications

  • Answered by AI
  • Q2. Tell us about stacker cum reclaimer operating procedure
  • Ans. 

    Stacker cum reclaimer is a machine used in material handling to stack and reclaim bulk materials in industries like mining and power plants.

    • The stacker cum reclaimer is used to stack bulk materials in stockyards and reclaim them for further processing.

    • The operating procedure involves setting up the machine parameters such as speed, height, and reach.

    • The operator must ensure proper alignment of the machine with the stoc...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Reflect on your practical knowledge regarding the maintenance of various conveyor equipment and feel confident in expressing your thoughts.

Site Incharge Interview Questions & Answers

user image Atul Kr Singh

posted on 15 May 2024

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via LinkedIn and was interviewed in Apr 2024. There were 3 interview rounds.

Round 1 - HR 

(4 Questions)

  • Q1. What is the responsibility of Site Manager?
  • Ans. 

    Site Manager is responsible for overseeing all operations at a construction site, ensuring safety, quality, and efficiency.

    • Overseeing all activities at the construction site

    • Ensuring safety regulations are followed

    • Managing resources and materials efficiently

    • Coordinating with subcontractors and suppliers

    • Communicating with stakeholders and clients

    • Resolving any issues or conflicts that arise

    • Maintaining project schedules an...

  • Answered by AI
  • Q2. What is compliance for bill submission?
  • Ans. 

    Compliance for bill submission ensures that all necessary documentation and information is provided accurately and on time.

    • Ensure all required fields are filled out completely and accurately

    • Submit bills within the specified timeframe

    • Follow any specific formatting or submission guidelines provided by the organization

    • Keep track of submission deadlines and requirements

    • Maintain records of all submitted bills for future ref...

  • Answered by AI
  • Q3. Why Labour Licence Required?
  • Ans. 

    A labor license is essential for ensuring compliance with labor laws, protecting workers' rights, and promoting safe working conditions.

    • Legal Compliance: A labor license ensures that employers adhere to local labor laws, such as minimum wage and working hours, preventing legal issues.

    • Worker Protection: It safeguards the rights of workers by ensuring they are treated fairly and have access to necessary benefits, like he...

  • Answered by AI
  • Q4. What is ISML ?
  • Ans. 

    ISML stands for Integrated Site Management Log. It is a tool used in construction projects to track and manage site activities.

    • ISML helps in monitoring progress of construction activities

    • It assists in tracking resources and materials used on site

    • Provides a centralized platform for communication and documentation

    • Examples: Daily progress reports, resource allocation logs

  • Answered by AI
Round 2 - Technical 

(10 Questions)

  • Q1. What is broad gauge, narrow gauge and what's the gauge reading for both
  • Ans. 

    Broad gauge and narrow gauge are types of railway track gauges. Broad gauge has a wider distance between the rails compared to narrow gauge.

    • Broad gauge has a distance of 1,676 mm (5 ft 6 in) between the rails

    • Narrow gauge has a distance of less than 1,435 mm (4 ft 8 1/2 in) between the rails

    • Examples of broad gauge railways include Indian Railways and Russian Railways

    • Examples of narrow gauge railways include the Darjeeli...

  • Answered by AI
  • Q2. What is motor point and hand point, and difference?
  • Q3. What is bolster?
  • Ans. 

    A bolster is a long, narrow pillow or cushion filled with cotton, down, or fiber, typically used for support or decoration.

    • Bolsters are often used in yoga for support during poses.

    • They can also be used as decorative pillows on beds or couches.

    • In medical settings, bolsters may be used to support a patient's body during certain procedures or treatments.

  • Answered by AI
  • Q4. Whats is the work of S&T department in railway.
  • Ans. 

    The S&T department in railways is responsible for signaling and telecommunication systems to ensure safe and efficient train operations.

    • Designing, installing, and maintaining signaling systems to control train movements

    • Managing telecommunication systems for communication between trains and control centers

    • Implementing safety measures such as automatic train protection systems

    • Monitoring and troubleshooting signal and com...

  • Answered by AI
  • Q5. Why dummy test perform?
  • Ans. 

    Dummy tests are performed to ensure that all systems and processes are functioning correctly without impacting actual data or operations.

    • Dummy tests help identify any potential issues or bugs in the system before actual data is used.

    • They are used to validate the functionality of a system without risking real data.

    • Dummy tests can be used to simulate different scenarios and test the system's response.

    • They are essential f...

  • Answered by AI
  • Q6. What is the work of shuntman, pointsman and C&W?
  • Ans. 

    Shuntman, pointsman, and C&W are responsible for the safe movement of trains and maintenance of railway infrastructure.

    • Shuntman is responsible for moving wagons within a railway yard to form trains or to load/unload cargo.

    • Pointsman operates railway points or switches to control the direction of trains on different tracks.

    • C&W (Carriage and Wagon) staff are responsible for the maintenance and repair of railway carriages ...

  • Answered by AI
  • Q7. If the signal not working, How to pass train without signal?
  • Ans. 

    In such a situation, the train can be passed by using manual flagging and communication between the station staff and the train driver.

    • Use manual flagging by station staff to signal the train to proceed cautiously.

    • Ensure clear communication between station staff and train driver to coordinate the safe passage of the train.

    • Implement strict safety protocols and procedures to avoid any potential accidents or mishaps.

    • Consi...

  • Answered by AI
  • Q8. What is shunt signal?
  • Ans. 

    A shunt signal is a signal that bypasses a portion of a circuit or system.

    • Shunt signals are used to divert a portion of the main signal for specific purposes.

    • They are commonly used in electrical circuits to measure current by diverting a small portion of it through a shunt resistor.

    • Shunt signals can also be used in communication systems to bypass certain components for testing or troubleshooting purposes.

  • Answered by AI
  • Q9. Whats is the Role of PWI?
  • Ans. 

    The Role of PWI (Permanent Way Inspector) is to ensure the safety and maintenance of railway tracks and infrastructure.

    • Inspecting railway tracks for defects and ensuring they meet safety standards

    • Supervising maintenance and repair work on tracks and infrastructure

    • Ensuring compliance with regulations and guidelines set by the railway authorities

    • Investigating accidents or incidents related to the railway tracks

    • Training a...

  • Answered by AI
  • Q10. What is IPS and what is the importance of the system?
  • Ans. 

    IPS stands for Intrusion Prevention System, it is a network security technology that monitors network and/or system activities for malicious activities or policy violations.

    • IPS is designed to prevent unauthorized access, misuse, modification, or denial of a computer network and network-accessible resources.

    • It can be hardware-based, software-based, or a combination of both.

    • IPS works by scanning network traffic in real-t...

  • Answered by AI
Round 3 - One-on-one 

(3 Questions)

  • Q1. What is the capacity of Adani Power Jharkhand Limited power plant?
  • Ans. 

    The capacity of Adani Power Jharkhand Limited power plant is 1600 MW.

    • The power plant has a capacity of 1600 MW.

    • It is located in Godda district of Jharkhand, India.

    • The plant uses supercritical technology for efficient power generation.

  • Answered by AI
  • Q2. Who is the coustom of Godda unit?
  • Ans. 

    The custom of Godda unit refers to the specific practices and traditions followed by the employees and management at the Godda unit.

    • The custom of Godda unit may include daily safety briefings before starting work.

    • Employees at the Godda unit may have a tradition of celebrating birthdays or work anniversaries together.

    • There may be a specific way of reporting incidents or accidents at the Godda unit.

    • The custom of Godda un...

  • Answered by AI
  • Q3. What is 5 S?
  • Ans. 

    5S is a methodology used for organizing a workplace for efficiency and effectiveness by identifying and storing items used, maintaining the area and items, and sustaining the new order.

    • Sort: Separate necessary items from unnecessary items.

    • Set in order: Arrange necessary items in a logical and efficient manner.

    • Shine: Clean and inspect the work area regularly.

    • Standardize: Establish standards and procedures for maintainin...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Preparation is must before giving Interview.

Skills evaluated in this interview

Interview Questions & Answers

user image Anonymous

posted on 29 May 2025

Interview experience
3
Average
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I appeared for an interview before May 2024, where I was asked the following questions.

  • Q1. Self introduction
  • Q2. Mechanical related

Interview Preparation Tips

Interview preparation tips for other job seekers - Salary not well

Top trending discussions

View All
Interview Tips & Stories
2w
toobluntforu
·
works at
Cvent
Can speak English, can’t deliver in interviews
I feel like I can't speak fluently during interviews. I do know english well and use it daily to communicate, but the moment I'm in an interview, I just get stuck. since it's not my first language, I struggle to express what I actually feel. I know the answer in my head, but I just can’t deliver it properly at that moment. Please guide me
Got a question about Hems Corporation?
Ask anonymously on communities.

Interview questions from similar companies

I applied via Naukri.com and was interviewed before Aug 2020. There were 4 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Technical questions : 1)oops concepts 2)plsql cursors, triggers, procedures 3)quick sort algorithm

Interview Preparation Tips

Interview preparation tips for other job seekers - Be prepared with your resume. None of the questions were asked out of resume.

I applied via Company Website and was interviewed in Jul 2021. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Tell about yourselves. And about fast work experience. Our positive and negative. How dedicate person when you’re in work.

Interview Preparation Tips

Interview preparation tips for other job seekers - Everything you should talk with clear and with good communication skills. No more fear.

Interview Questionnaire 

2 Questions

  • Q1. Tell me about yourself
  • Q2. Reverse string
  • Ans. 

    Reversing a string involves rearranging its characters in the opposite order, which can be done using various methods.

    • Use built-in functions: In Python, you can reverse a string with slicing: `reversed_string = original_string[::-1]`.

    • Iterative approach: Loop through the string from the end to the beginning and build a new string.

    • Using recursion: Define a function that calls itself with a smaller substring until it reac...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Average level interview

I applied via Campus Placement and was interviewed in Aug 2021. There was 1 interview round.

Interview Questionnaire 

4 Questions

  • Q1. Tell me your self introduction
  • Ans. 

    Dynamic professional with diverse experience in management, team leadership, and strategic planning, eager to contribute to organizational success.

    • Over 5 years of experience in management roles, leading teams to achieve operational goals.

    • Successfully implemented a new project management system that improved efficiency by 30%.

    • Strong background in customer service, enhancing client satisfaction scores by 20% through effe...

  • Answered by AI
  • Q2. What is python
  • Ans. 

    Python is a high-level, interpreted programming language known for its simplicity, readability, and versatility.

    • Python is used for web development, data analysis, artificial intelligence, and more.

    • It has a large standard library and supports multiple programming paradigms.

    • Python code is often shorter and easier to read than other languages.

    • It uses indentation to indicate code blocks instead of curly braces or keywords.

    • ...

  • Answered by AI
  • Q3. What are the highlevel languages
  • Ans. 

    High-level languages are programming languages that are easier to read and write than low-level languages.

    • High-level languages are closer to human language than machine language.

    • They are easier to learn and use than low-level languages.

    • Examples of high-level languages include Java, Python, and C++.

  • Answered by AI
  • Q4. Tell me about hcl company
  • Ans. 

    HCL Technologies is a leading global IT services company based in India, specializing in software development and IT consulting.

    • Founded in 1976, HCL is one of India's original IT services companies.

    • HCL operates in over 50 countries, providing services to clients across various industries.

    • The company focuses on innovation and has invested heavily in R&D, exemplified by its HCL Innovation Labs.

    • HCL's services include ...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - This interview was a technical one but was majority a stress test it lasted for about 1hour 10minutes.the interviewer wanted to test both my knowledge and communication skills. It was my first of campus interview and I think I did pretty well for a fresher.

Skills evaluated in this interview

Are these interview questions helpful?
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Coding Test 

Good Practice

Interview Preparation Tips

Interview preparation tips for other job seekers - Good Practice of Coding.......

I appeared for an interview in Nov 2020.

Round 1 - Coding Test 

(2 Questions)

Round duration - 120 minutes
Round difficulty - Medium

This was an online coding, mcq and debugging round round held on Amcat platform, there were 3 sections in the test.
1)20 MCQ questions {10 involving mathematics and the other 10 on programming fundamentals}; duration:20 mins;
you cannot navigate back to a questions after moving further, so have to answer carefully
2)debugging section- it involved 7 questions which were to be completed within 20 mins, 5 of them were very easy, each question only took almost a minute to figure out the problem with the code, last 2 questions were relatively moderate and there were errors at 3-4 sections of the entire code. I was able to solve all the questions in 15 mins
3)2 Coding questions- duration:80 mins, one was moderate on string while the other one involved dynamic programming, I was able to successfully execute all the available test cases.

  • Q1. 

    Smallest Window Problem Statement

    Given two strings, S and X, your task is to find the smallest substring in S that contains all the characters present in X.

    Example:

    Input:
    S = "abdd", X = "bd"
    Outpu...
  • Ans. 

    Find the smallest substring in S that contains all characters in X.

    • Use a sliding window approach to find the smallest window in S containing all characters of X.

    • Maintain a hashmap to keep track of characters in X and their frequencies.

    • Slide the window by moving the right pointer until all characters in X are found, then move the left pointer to minimize the window size.

    • Return the smallest window found.

    • Example: S = 'abd...

  • Answered by AI
  • Q2. 

    Minimum Sum in Matrix Problem Statement

    You are given a 2D matrix 'ARR' of size 'N x 3' with integers, where 'N' is the number of rows. Your task is to compute the smallest sum achievable by selecting one...

  • Ans. 

    Find the smallest sum achievable by selecting one element from each row of a 2D matrix, following certain constraints.

    • Iterate through each row and find the minimum element that does not violate the constraints.

    • Keep track of the minimum sum achieved by selecting elements from each row.

    • Avoid selecting elements directly beneath previously selected elements.

  • Answered by AI
Round 2 - Video Call 

(1 Question)

Round duration - 45 minutes
Round difficulty - Hard

The interview started with introduction, there were two interviewers, they both introduced themselves and then asked me to introduce myself. Then we had a brief description on my projects, and they really appreciated my projects. Then as they were more concerned with DSA part, so we moved towards solving a coding problem. It was a famous rotten oranges problem with some change in language but as I haven't seen it beforehand, I wasn't able to give them an optimal approach and had to ask for some hints, but with a certain amount of help and hints, I was able to solve the problem and successfully coded it in 5 mins. Then the interviewers went for a dry run of the algorithm and tried to run it on each and every corner case, but as my algorithm was kind of bullet proof, it successfully passed all the corner cases.
Then they went for some questions on OOPS concepts involving inheritance and we had a long discussion on virtual function and runtime polymorphism. Then the interview was ended after a Q/A round that lasted for 3-4 minutes.

  • Q1. 

    Rotten Oranges Problem Statement

    Given a grid containing oranges in three possible states:

    • Value 0 - Empty cell
    • Value 1 - Fresh orange
    • Value 2 - Rotten orange

    Every second, any fresh orange adjac...

  • Ans. 

    Given a grid with fresh and rotten oranges, determine the minimum time for all oranges to become rotten.

    • Create a queue to store the coordinates of rotten oranges and perform BFS to rot adjacent fresh oranges

    • Track the time taken to rot all oranges and return -1 if some fresh oranges remain

    • Handle edge cases like empty grid or no fresh oranges present

    • Example: For input grid = [[2,1,1],[1,1,0],[0,1,1]], the minimum time to...

  • Answered by AI

Interview Preparation Tips

Professional and academic backgroundI applied for the job as SDE - 1 in HyderabadEligibility criteriaabove 6.5 CGPA, eligible branches- computer science, electronics and electricalAmazon interview preparation:Topics to prepare for the interview - Data Structures and Algorithms, Arrays, Graphs and Trees, Pointers, OOPS, System Design, Algorithms, Dynamic Programming, Constructive Algorithms, Competitive ProgrammingTime required to prepare for the interview - 5 monthsInterview preparation tips for other job seekers

Tip 1 : Try to keep yourself involved in competitive programming on regular basis {ex-Codechef, codeforces etc}
Tip 2 : brush up concepts on DSA and practice at least all questions from interviewbit and around 300 questions from GFG and Leetcode of upto intermediate level, this will help you in building your concepts and you will be quickly able to answer the questions in face to face interviews
Tip 3 : Complete some courses on data structures and algorithms and some programming languages{coding ninjas courses are preferable for valuable content}

Application resume tips for other job seekers

Tip 1 : Try to keep only those things in resume on which you have very good command and you should be able to answer all of the questions(upto moderate level) related to your technical skills
Tip 2 : Mention your projects with brief description, try avoiding very high level description because some times reader might not be able to understand your work, keep it descriptive and understandable

Final outcome of the interviewRejected

Skills evaluated in this interview

I applied via Approached by Company and was interviewed before May 2021. There were 2 interview rounds.

Round 1 - Technical 

(2 Questions)

  • Q1. They will ask about your past experience and current project details in detail.
  • Ans. Just give the proper answer about your past experience very Convincingly and confidently.
  • Answered Anonymously
  • Q2. Few technical questions they will ask.
  • Ans. If you already prepared for your interview, then you can answer the basic technical questions and you will get selected.
  • Answered Anonymously
Round 2 - Technical 

(1 Question)

  • Q1. As this was the client round. Deep technical questions about relevant experience.
  • Ans. Just answer to all the questions whatever they ask in very confident manner and should have manageable comm skill to clear the client round.
  • Answered Anonymously

Interview Preparation Tips

Interview preparation tips for other job seekers - Just don't wait for the perfect time. Perfect time is a Myth. Just go for it.

Hems Corporation Interview FAQs

How many rounds are there in Hems Corporation interview?
Hems Corporation interview process usually has 2-3 rounds. The most common rounds in the Hems Corporation interview process are Technical, One-on-one Round and HR.
What are the top questions asked in Hems Corporation interview?

Some of the top questions asked at the Hems Corporation interview -

  1. What is the capacity of Adani Power Jharkhand Limited power pla...read more
  2. If the signal not working, How to pass train without sign...read more
  3. What is IPS and what is the importance of the syst...read more

Tell us how to improve this page.

Overall Interview Experience Rating

4.7/5

based on 3 interview experiences

Difficulty level

Easy 33%
Moderate 67%

Duration

Less than 2 weeks 100%
View more

Interview Questions from Similar Companies

TCS Interview Questions
3.6
 • 11.1k Interviews
Accenture Interview Questions
3.8
 • 8.6k Interviews
Infosys Interview Questions
3.6
 • 7.9k Interviews
Wipro Interview Questions
3.7
 • 6.1k Interviews
Cognizant Interview Questions
3.7
 • 5.9k Interviews
Amazon Interview Questions
4.0
 • 5.3k Interviews
Capgemini Interview Questions
3.7
 • 5.1k Interviews
HCLTech Interview Questions
3.5
 • 4.1k Interviews
Tech Mahindra Interview Questions
3.5
 • 4.1k Interviews
Genpact Interview Questions
3.8
 • 3.4k Interviews
View all

Hems Corporation Reviews and Ratings

based on 13 reviews

3.5/5

Rating in categories

3.4

Skill development

3.3

Work-life balance

3.4

Salary

3.3

Job security

3.3

Company culture

3.4

Promotions

3.3

Work satisfaction

Explore 13 Reviews and Ratings
Site Incharge
4 salaries
unlock blur

₹4.2 L/yr - ₹5.4 L/yr

Shift Incharge
4 salaries
unlock blur

₹4.6 L/yr - ₹5.6 L/yr

Engineer
3 salaries
unlock blur

₹3.8 L/yr - ₹4 L/yr

Field Engineer
3 salaries
unlock blur

₹2.2 L/yr - ₹2.8 L/yr

Junior Engineer
3 salaries
unlock blur

₹3.2 L/yr - ₹4.8 L/yr

Explore more salaries
Compare Hems Corporation with

TCS

3.6
Compare

Accenture

3.7
Compare

Wipro

3.7
Compare

Cognizant

3.7
Compare
write
Share an Interview