Filter interviews by
Mcb stands for Miniature Circuit Breaker and MCCB stands for Molded Case Circuit Breaker.
Mcb is a type of circuit breaker that is used for low voltage applications.
MCCB is a type of circuit breaker that is used for high voltage applications.
Both Mcb and MCCB are used to protect electrical circuits from overloads and short circuits.
Mcb is usually rated for currents up to 100 amps, while MCCB can handle currents up to 25...
Current and voltage are two fundamental concepts in electricity. Current is the flow of electric charge, while voltage is the potential difference that drives the flow.
Current is the rate of flow of electric charge, measured in amperes (A).
Voltage is the force or pressure that pushes the electric charge to flow, measured in volts (V).
Current flows through a conductor, while voltage exists across a conductor.
Current is ...
A unit is a standard measurement used to quantify physical quantities. Current is measured in amperes (A) and voltage is measured in volts (V).
A unit is a fixed quantity used as a standard of measurement.
Current is the flow of electric charge in a circuit and is measured in amperes (A).
Voltage is the electric potential difference between two points in a circuit and is measured in volts (V).
The unit of current, ampere, ...
There are several types of transformers used in electrical systems.
Power Transformers
Distribution Transformers
Instrument Transformers
Auto Transformers
Isolation Transformers
Step-up and Step-down Transformers
Three-phase Transformers
Single-phase Transformers
D.OL starter is a type of motor starter used to start and stop three-phase motors.
D.OL stands for Direct-On-Line.
It is the simplest and most common type of motor starter.
It directly connects the motor to the power supply, providing full voltage to the motor.
It is suitable for small to medium-sized motors.
It does not provide any protection against overloading or short circuits.
It is commonly used in applications such as
An ampere (amp) is the unit of electric current in the International System of Units (SI).
Amperes measure the rate of flow of electric charge.
It is named after the French physicist André-Marie Ampère.
One ampere is defined as one coulomb of charge passing through a point in one second.
Amperes are used to measure the current flowing through electrical circuits.
Common household appliances like light bulbs and refrigerator...
I was interviewed in Aug 2024.
Cattle feed is a specialized food given to cattle to meet their nutritional needs and promote growth and health.
Cattle feed is formulated to provide the necessary nutrients such as protein, carbohydrates, vitamins, and minerals.
Different types of cattle feed include hay, silage, grains, and protein supplements.
Balanced cattle feed helps in improving milk production, weight gain, and overall health of the animals.
The dose of feed refers to the amount of food given to an animal in a single feeding.
The dose of feed should be tailored to the specific needs and size of the animal.
Factors to consider when determining the dose include age, weight, activity level, and health status.
For example, a large, active dog may require more food than a small, sedentary dog.
Calcium plays a crucial role in the health and productivity of cattle.
Calcium is essential for proper bone and teeth formation in cattle.
It is also important for muscle function, nerve transmission, and blood clotting.
Calcium deficiency can lead to health issues such as milk fever in dairy cows.
Cattle require a balanced diet with adequate levels of calcium to maintain optimal health and productivity.
Balanced feed refers to a diet that provides all the necessary nutrients in the right proportions for an individual's needs.
Balanced feed includes a mix of proteins, carbohydrates, fats, vitamins, and minerals.
It is important for overall health and well-being.
Examples of balanced feed include a meal with lean protein, whole grains, vegetables, and fruits.
Balanced feed can vary depending on age, gender, activity level,
I was interviewed in Jan 2025.
Leadership styles, Team collaboration, Decision-making, Change management
Remote work, Work-life balance, Employee engagement
I prioritize work-life balance by setting boundaries, delegating tasks, and practicing self-care.
I set clear boundaries between work and personal time to avoid burnout.
I delegate tasks effectively to ensure work responsibilities are managed efficiently.
I prioritize self-care activities such as exercise, hobbies, and spending time with loved ones.
I use time management techniques like prioritizing tasks and setting reali
I have over 10 years of experience working with teams in construction projects.
Led a team of construction workers to successfully complete a commercial building project on time and within budget
Collaborated with architects, engineers, and subcontractors to ensure smooth workflow and communication
Trained new team members on safety protocols and construction techniques
Resolved conflicts and issues within the team to main
The procure to pay process involves the steps from requisitioning goods/services to making payment to the supplier.
Requisitioning: Identifying the need for goods/services
Vendor selection: Choosing a supplier based on criteria like price, quality, and delivery time
Purchase order creation: Formalizing the agreement with the supplier
Goods receipt: Receiving the goods/services and confirming quality and quantity
Invoice pro...
Types of negotiation include distributive, integrative, and principled negotiation.
Distributive negotiation focuses on dividing a fixed amount of resources, often a zero-sum game.
Integrative negotiation aims to create value for both parties by exploring multiple options and interests.
Principled negotiation involves focusing on interests, not positions, and seeking mutual gains.
Examples: Distributive - negotiating the p...
I have saved over $10,000 by budgeting, meal planning, and using coupons.
Budgeting effectively to track expenses and cut unnecessary costs
Meal planning to reduce food waste and dining out expenses
Using coupons and shopping sales to save on groceries and household items
I have faced and overcome challenges such as managing a high volume of assignments, meeting tight deadlines, and resolving conflicts within the team.
Managing a high volume of assignments by prioritizing tasks and delegating responsibilities
Meeting tight deadlines by creating a detailed timeline and working efficiently
Resolving conflicts within the team by facilitating open communication and finding common ground
Godrej Industries Group interview questions for popular designations
I applied via Walk-in and was interviewed in Aug 2024. There were 3 interview rounds.
I am a detail-oriented and organized individual with a strong background in accounting and finance.
Graduated with a degree in Accounting
Experience working with financial statements and budgets
Proficient in using accounting software such as QuickBooks
Strong analytical skills and attention to detail
Excellent communication and teamwork abilities
My expected salary is competitive based on my experience, skills, and the market rate for Account Assistants.
I have X years of experience in accounting and finance.
I am proficient in using accounting software such as QuickBooks and Excel.
I have a strong attention to detail and excellent organizational skills.
I have a Bachelor's degree in Accounting or related field.
I have researched the average salary range for Account...
Ms office and SAP coding test
GST filing involves submitting monthly, quarterly, and annual returns to the government.
Ensure all sales and purchases are accurately recorded in the GST portal
Calculate the total GST liability and input the details in the appropriate sections
Verify the information before submitting to avoid errors or penalties
File returns on time to avoid late fees or legal consequences
SAP T codes are transaction codes used in SAP to access specific functions or perform specific tasks in the system.
FBL1N - Display Vendor Line Items
FB50 - Post Document
F-02 - Enter G/L Account Posting
FB03 - Display Document
F110 - Payment Run
Get interview-ready with Top Godrej Industries Group Interview Questions
I applied via Naukri.com and was interviewed in Dec 2024. There was 1 interview round.
Introduction & about company
Prepare Excel sheet & using many formulas
Responsibility & accountability are key traits for a store supervisor. They involve overseeing operations, managing staff, ensuring customer satisfaction, and meeting targets.
Overseeing day-to-day operations of the store
Managing and supervising store staff
Ensuring customer satisfaction and resolving any issues
Meeting sales targets and KPIs
Accountability for inventory management and financial performance
I applied via Recruitment Consulltant and was interviewed in Aug 2024. There was 1 interview round.
I applied via LinkedIn and was interviewed in Oct 2024. There was 1 interview round.
I have a proven track record of successfully developing and implementing marketing strategies to drive business growth.
Extensive experience in developing and executing marketing campaigns
Strong analytical skills to track and measure campaign effectiveness
Ability to identify target markets and create tailored messaging
Proven ability to collaborate with cross-functional teams to achieve marketing goals
I was interviewed in Mar 2024.
The same way to do it u r right now is
Process sheet for manufacturing a plastic water bottle
Step 1: Injection molding to create the bottle shape
Step 2: Cooling and solidifying the plastic
Step 3: Trimming excess plastic from the bottle
Step 4: Adding a cap and seal to the bottle
Step 5: Quality control inspection
Step 6: Packaging and labeling the finished product
Jigs are used to guide cutting tools and fixtures hold workpieces in place during machining operations.
Jigs guide cutting tools to ensure accurate and consistent cuts
Fixtures hold workpieces securely in place during machining operations
Jigs are often used in drilling, tapping, and reaming operations
Fixtures are commonly used in milling, grinding, and turning processes
Limits fits tolerance refer to the range of acceptable dimensions in manufacturing to ensure proper fit and function of parts.
Limits: Maximum and minimum acceptable dimensions for a part
Fits: Relationship between mating parts to ensure proper assembly
Tolerance: Allowable deviation from a specified dimension
Example: A shaft with a diameter of 25mm may have a tolerance of +/- 0.1mm for proper fit with a hole of 25.1mm
I applied via Company Website and was interviewed in Jun 2024. There were 2 interview rounds.
Aptitude Test, Technical cum Logical Test, Essay Writing etc.
Top trending discussions
The duration of Godrej Industries Group interview process can vary, but typically it takes about less than 2 weeks to complete.
based on 128 interviews
Interview experience
based on 1.2k reviews
Rating in categories
10-20 Yrs
Not Disclosed
Assistant Manager
131
salaries
| ₹0 L/yr - ₹0 L/yr |
Deputy Manager
75
salaries
| ₹0 L/yr - ₹0 L/yr |
Manager
35
salaries
| ₹0 L/yr - ₹0 L/yr |
Sales Executive
31
salaries
| ₹0 L/yr - ₹0 L/yr |
Senior Executive
21
salaries
| ₹0 L/yr - ₹0 L/yr |
Tata Group
Reliance Industries
Aditya Birla Group
Mahindra & Mahindra