Godrej Industries Group
50+ Devon Software Services Interview Questions and Answers
Q1. What is unit and how maser current and voltage ?
A unit is a standard measurement used to quantify physical quantities. Current is measured in amperes (A) and voltage is measured in volts (V).
A unit is a fixed quantity used as a standard of measurement.
Current is the flow of electric charge in a circuit and is measured in amperes (A).
Voltage is the electric potential difference between two points in a circuit and is measured in volts (V).
The unit of current, ampere, is named after the French physicist André-Marie Ampère.
The...read more
Q2. 1. Hierarchy for a solid waste management system? 2. What are the industrial technologies used for wastewater and solid waste management? 3. What are the challenges and risks associated with Multi-Effect Evapor...
read moreQ3. What is different between current and voltage.
Current and voltage are two fundamental concepts in electricity. Current is the flow of electric charge, while voltage is the potential difference that drives the flow.
Current is the rate of flow of electric charge, measured in amperes (A).
Voltage is the force or pressure that pushes the electric charge to flow, measured in volts (V).
Current flows through a conductor, while voltage exists across a conductor.
Current is analogous to the flow of water in a pipe, while voltage is...read more
Q4. How many types of transformer ?
There are several types of transformers used in electrical systems.
Power Transformers
Distribution Transformers
Instrument Transformers
Auto Transformers
Isolation Transformers
Step-up and Step-down Transformers
Three-phase Transformers
Single-phase Transformers
Q5. What is the mean by life. The life has combined body and mind with soul to enclosing like a chain link. To connectivity of 5 elements and five senses for a life to apply with mind of momentation....
Life is the combination of body, mind, and soul, connected through the five elements and senses for a meaningful existence.
Life is a holistic concept that involves the integration of physical, mental, and spiritual aspects.
The connection between the body, mind, and soul is essential for a balanced and fulfilling life.
The five elements (earth, water, fire, air, and ether) and five senses play a crucial role in experiencing and understanding life.
Mindfulness practices like yoga...read more
Q6. What is Mcb and mccb ?
Mcb stands for Miniature Circuit Breaker and MCCB stands for Molded Case Circuit Breaker.
Mcb is a type of circuit breaker that is used for low voltage applications.
MCCB is a type of circuit breaker that is used for high voltage applications.
Both Mcb and MCCB are used to protect electrical circuits from overloads and short circuits.
Mcb is usually rated for currents up to 100 amps, while MCCB can handle currents up to 2500 amps.
Examples of applications for Mcb include residenti...read more
Q7. What is presentation. You are full of love... Substation sacrification.. peace and com.....
Presentation is the act of conveying information or ideas to an audience in a clear and engaging manner, while embodying qualities such as love, peace, and compassion.
Presentation involves effectively communicating information or ideas to an audience.
It includes aspects such as body language, tone of voice, and visual aids.
Being full of love, peace, and compassion can enhance the impact of a presentation and create a positive atmosphere.
Substation sacrification may refer to t...read more
Q8. What's the process of part proof in press tool
Part proof in press tool is the process of verifying the accuracy and functionality of the tooling before mass production.
Part proof involves testing the press tool with a sample part to ensure it meets the required specifications.
The process includes checking for proper fit, form, and function of the part.
Measurements and inspections are conducted to validate the dimensions and quality of the part.
Any necessary adjustments or modifications are made to the press tool based on...read more
Q9. How occurred defect of casting and find remedies
Defects in casting can occur due to various reasons and can be remedied through proper techniques and processes.
Defects in casting can be caused by factors such as improper mold design, inadequate pouring temperature, or poor quality control.
Remedies for casting defects include improving mold design, optimizing pouring temperature, and implementing strict quality control measures.
For example, if a casting defect like shrinkage occurs, the remedy may involve modifying the mold...read more
Q10. What is D.OL starter?
D.OL starter is a type of motor starter used to start and stop three-phase motors.
D.OL stands for Direct-On-Line.
It is the simplest and most common type of motor starter.
It directly connects the motor to the power supply, providing full voltage to the motor.
It is suitable for small to medium-sized motors.
It does not provide any protection against overloading or short circuits.
It is commonly used in applications such as pumps, fans, and conveyors.
Q11. What's the shrinkage value of casting
The shrinkage value of casting refers to the reduction in size of a casting during the cooling and solidification process.
Shrinkage occurs due to the contraction of the molten metal as it cools and solidifies.
It is an important consideration in casting design and can affect the dimensional accuracy of the final product.
The shrinkage value varies depending on the type of metal being cast and the specific casting process used.
For example, aluminum alloys typically have a shrink...read more
Q12. What is amper?
An ampere (amp) is the unit of electric current in the International System of Units (SI).
Amperes measure the rate of flow of electric charge.
It is named after the French physicist André-Marie Ampère.
One ampere is defined as one coulomb of charge passing through a point in one second.
Amperes are used to measure the current flowing through electrical circuits.
Common household appliances like light bulbs and refrigerators typically draw currents in the range of a few amperes.
Q13. What is microbiology and what is food test
Q14. Is there any kaizen improvement have you done?
Yes, I implemented a kaizen improvement in my previous role.
I identified a bottleneck in the production line and suggested a new layout that reduced the time taken to complete the process.
I introduced a visual management system that improved communication and reduced errors.
I conducted a time study and identified areas where we could reduce waste and improve efficiency.
I encouraged cross-functional teams to collaborate and share ideas for improvement.
I regularly reviewed our ...read more
Q15. TPM,Kaizens,Role and organization structure in previous organization.
Implemented TPM and Kaizens to improve efficiency and productivity. Worked within a structured organization with clear roles.
Implemented TPM (Total Productive Maintenance) to reduce downtime and increase equipment effectiveness
Implemented Kaizens (continuous improvement) to identify and eliminate waste in processes
Worked within a structured organization with clear roles and responsibilities to ensure efficient workflow
Collaborated with cross-functional teams to implement impr...read more
Q16. What is the Star Delta in a motor connection
Star Delta connection is a method used to reduce the starting current of a motor.
Star Delta connection involves connecting the motor windings in a star configuration during starting and then switching to a delta configuration once the motor reaches a certain speed.
It is commonly used for large induction motors to reduce the starting current and torque.
This method helps in preventing damage to the motor and reduces stress on the electrical supply network.
Star Delta connection ...read more
Q17. What is food testing and food testing understanding you
Q18. How can work and duration of job
The work and duration of the job depend on the specific role and company policies.
The work and duration of the job will vary depending on the specific role and responsibilities.
The company policies and culture will also play a role in determining work hours and duration of the job.
Some technical support roles may require working outside of regular business hours or being on-call.
It's important to clarify expectations and responsibilities with your employer before accepting a ...read more
Q19. Hot to calculate temperature of mold
The temperature of mold can be calculated using various methods and instruments.
Use a thermometer to measure the temperature of the mold surface
Utilize thermal imaging cameras to capture the temperature distribution of the mold
Consider using thermocouples or temperature sensors embedded in the mold
Calculate the temperature based on the cooling time of the mold after injection molding
Take into account the ambient temperature and its effect on the mold temperature
Q20. What will do if the customer is rood
I will remain calm and professional, listen to their concerns, and try to find a solution to their problem.
Remain calm and professional
Listen to their concerns
Try to find a solution to their problem
Avoid taking their behavior personally
Apologize for any inconvenience caused
Q21. Why need ISO tag mark
ISO tag mark is needed to ensure compliance with international standards and to demonstrate quality and credibility.
ISO tag mark is a certification that indicates a company or organization has met the requirements of specific ISO standards.
It helps in establishing trust and credibility with customers, suppliers, and stakeholders.
ISO tag mark ensures that products, services, and processes meet international quality standards.
It enhances the reputation of the organization and c...read more
Q22. What is the unit of SFC?
SFC stands for Specific Fuel Consumption, which is a unit used to measure the amount of fuel consumed per unit of power produced.
SFC is typically measured in units such as kg/kWh (kilograms per kilowatt-hour) or g/kWh (grams per kilowatt-hour).
It is commonly used in the aviation industry to measure the efficiency of aircraft engines.
Lower SFC values indicate higher fuel efficiency and vice versa.
Q23. Market Size of Each appliances Category
The market size of each appliance category varies based on factors such as consumer demand and technological advancements.
Market size is influenced by consumer demand and technological advancements
Categories include refrigerators, washing machines, dishwashers, ovens, and more
Global market size for refrigerators was valued at $18.4 billion in 2020
Washing machine market size is expected to reach $51.98 billion by 2028
Dishwasher market size is projected to reach $7.2 billion by...read more
Q24. What is the difference between HTTp and HTTPS
HTTP is unsecured protocol while HTTPS is secured protocol using SSL/TLS encryption.
HTTP stands for Hypertext Transfer Protocol, while HTTPS stands for Hypertext Transfer Protocol Secure.
HTTPS uses SSL/TLS encryption to secure the communication between the client and server, while HTTP does not.
HTTPS uses port 443 by default, while HTTP uses port 80.
HTTPS URLs begin with 'https://' and are secured with a padlock icon in the browser, while HTTP URLs begin with 'http://'.
Q25. Why are drive moter cabuls heating
Drive motor cables may heat up due to various reasons.
Overloading of the motor can cause excessive heat in the cables.
Poor cable insulation or damaged cables can lead to heat generation.
Loose connections or high resistance in the cables can result in heating.
Inadequate ventilation or cooling system can cause cables to heat up.
Operating the motor at higher than recommended voltage or current can lead to cable heating.
Q26. How many quality system you followed?
We follow multiple quality systems to ensure the best production standards.
We follow ISO 9001:2015 for quality management.
We also follow Good Manufacturing Practices (GMP) to ensure product safety and quality.
We have implemented Six Sigma methodology to minimize defects and improve efficiency.
We adhere to HACCP (Hazard Analysis and Critical Control Points) to identify and prevent potential hazards in the production process.
We also follow FDA regulations for medical device pro...read more
Q27. Magnetic testing calibration device used, name,process of calibration.
The magnetic testing calibration device used is a gauss meter. Calibration is done by using a known magnetic field source.
The gauss meter is used to measure the strength of a magnetic field.
Calibration is done by using a known magnetic field source, such as a permanent magnet or an electromagnet.
The gauss meter is placed near the magnetic field source and the reading is compared to the known value.
Adjustments are made to the gauss meter until the reading matches the known val...read more
Q28. Tell me accounts related SAP T code
SAP T codes are transaction codes used in SAP to access specific functions or perform specific tasks in the system.
FBL1N - Display Vendor Line Items
FB50 - Post Document
F-02 - Enter G/L Account Posting
FB03 - Display Document
F110 - Payment Run
Q29. How much switches in hydraulic function
The number of switches in hydraulic function varies depending on the specific system and its complexity.
The number of switches in a hydraulic function can range from none to multiple switches.
Switches in hydraulic systems are used for various purposes such as controlling pressure, flow, and direction of fluid.
Examples of switches in hydraulic systems include pressure switches, flow switches, and directional control valves.
The number and type of switches required in a hydrauli...read more
Q30. What is role of calcium in cattle
Calcium plays a crucial role in the health and productivity of cattle.
Calcium is essential for proper bone and teeth formation in cattle.
It is also important for muscle function, nerve transmission, and blood clotting.
Calcium deficiency can lead to health issues such as milk fever in dairy cows.
Cattle require a balanced diet with adequate levels of calcium to maintain optimal health and productivity.
Q31. Draw a process sheet for a particular product
Process sheet for manufacturing a plastic water bottle
Step 1: Injection molding to create the bottle shape
Step 2: Cooling and solidifying the plastic
Step 3: Trimming excess plastic from the bottle
Step 4: Adding a cap and seal to the bottle
Step 5: Quality control inspection
Step 6: Packaging and labeling the finished product
Q32. QC and QA explain briefly
QC (Quality Control) and QA (Quality Assurance) are two processes used to ensure the quality of products or services.
QC involves inspecting and testing products or services to identify defects or deviations from quality standards.
QA focuses on preventing defects by implementing processes and procedures to ensure quality throughout the entire production or service delivery process.
QC is reactive, while QA is proactive.
QC involves sampling and testing a subset of products or se...read more
Q33. Describe the type of cable use in Lt distribution line
Q34. Explain the procure to pay process
The procure to pay process involves the steps from requisitioning goods/services to making payment to the supplier.
Requisitioning: Identifying the need for goods/services
Vendor selection: Choosing a supplier based on criteria like price, quality, and delivery time
Purchase order creation: Formalizing the agreement with the supplier
Goods receipt: Receiving the goods/services and confirming quality and quantity
Invoice processing: Verifying the invoice against the purchase order ...read more
Q35. What is ur qualification
I have a Bachelor's degree in Computer Science and relevant certifications.
Bachelor's degree in Computer Science
Certifications in relevant fields
Experience in system operations
Q36. What is 3 phase supply
3 phase supply is a type of electrical power transmission that uses three alternating currents.
Consists of three alternating currents that are out of phase with each other
Commonly used in industrial and commercial settings for powering heavy machinery
More efficient and reliable compared to single phase supply
Examples: motors, pumps, compressors
Q37. What is food technology
Q38. What is hplcsystem drive you
Q39. IATF16949 explain
IATF16949 is a quality management standard for the automotive industry.
IATF16949 is based on the ISO 9001 standard.
It focuses on continuous improvement, defect prevention, and reduction of variation and waste.
It sets requirements for the design, development, production, and servicing of automotive-related products.
It emphasizes customer satisfaction and meeting regulatory and legal requirements.
Certification to IATF16949 is often required by automotive manufacturers and suppl...read more
Q40. Difference between jigs and fixtures
Jigs are used to guide cutting tools and fixtures hold workpieces in place during machining operations.
Jigs guide cutting tools to ensure accurate and consistent cuts
Fixtures hold workpieces securely in place during machining operations
Jigs are often used in drilling, tapping, and reaming operations
Fixtures are commonly used in milling, grinding, and turning processes
Q41. What are Ceremonies in agile?
Ceremonies in agile are regular meetings that help teams to plan, track progress, and improve collaboration.
Ceremonies include daily stand-up meetings, sprint planning, sprint review, and retrospective meetings
They help teams to stay on track, identify and resolve issues, and continuously improve their processes
Each ceremony has a specific purpose and structure, and all team members are expected to participate
Examples of ceremonies in agile include the daily stand-up, sprint ...read more
Q42. Engine torque versus rpm curve
Engine torque versus rpm curve shows how much twisting force an engine can produce at different engine speeds.
Engine torque is the measure of the twisting force an engine can produce
RPM (revolutions per minute) indicates how fast the engine is spinning
The torque curve shows the relationship between engine torque and RPM
Engines typically produce more torque at lower RPMs for better acceleration
High-performance engines may have a flatter torque curve for consistent power delive...read more
Q43. Difference between mig and tig welding
MIG and TIG welding are two different welding processes.
MIG stands for Metal Inert Gas welding, while TIG stands for Tungsten Inert Gas welding.
MIG welding uses a consumable wire electrode and a shielding gas to protect the weld from contamination.
TIG welding uses a non-consumable tungsten electrode and a separate filler material, if needed.
MIG welding is faster and easier to learn, suitable for thicker materials and high production rates.
TIG welding provides higher quality a...read more
Q44. Types of negotiation with examples.
Types of negotiation include distributive, integrative, and principled negotiation.
Distributive negotiation focuses on dividing a fixed amount of resources, often a zero-sum game.
Integrative negotiation aims to create value for both parties by exploring multiple options and interests.
Principled negotiation involves focusing on interests, not positions, and seeking mutual gains.
Examples: Distributive - negotiating the price of a car; Integrative - negotiating a partnership agr...read more
Q45. What Language You Known?
I am fluent in English, Spanish, and French.
Fluent in English, Spanish, and French
Can communicate effectively in multiple languages
Experience working in multilingual environments
Q46. How do to GST filing
GST filing involves submitting monthly, quarterly, and annual returns to the government.
Ensure all sales and purchases are accurately recorded in the GST portal
Calculate the total GST liability and input the details in the appropriate sections
Verify the information before submitting to avoid errors or penalties
File returns on time to avoid late fees or legal consequences
Q47. What is the elective subject
Elective subjects are optional courses that students can choose to study in addition to their core subjects.
Elective subjects allow students to explore their interests and tailor their education to their career goals.
Examples of elective subjects include art, music, computer programming, and foreign languages.
Elective subjects can help students develop new skills and broaden their knowledge base.
Q48. What is cattle feed
Cattle feed is a specialized food given to cattle to meet their nutritional needs and promote growth and health.
Cattle feed is formulated to provide the necessary nutrients such as protein, carbohydrates, vitamins, and minerals.
Different types of cattle feed include hay, silage, grains, and protein supplements.
Balanced cattle feed helps in improving milk production, weight gain, and overall health of the animals.
Q49. What is balance feed
Balanced feed refers to a diet that provides all the necessary nutrients in the right proportions for an individual's needs.
Balanced feed includes a mix of proteins, carbohydrates, fats, vitamins, and minerals.
It is important for overall health and well-being.
Examples of balanced feed include a meal with lean protein, whole grains, vegetables, and fruits.
Balanced feed can vary depending on age, gender, activity level, and health conditions.
Q50. Dose of feed
The dose of feed refers to the amount of food given to an animal in a single feeding.
The dose of feed should be tailored to the specific needs and size of the animal.
Factors to consider when determining the dose include age, weight, activity level, and health status.
For example, a large, active dog may require more food than a small, sedentary dog.
Q51. Define limits fits tolerance
Limits fits tolerance refer to the range of acceptable dimensions in manufacturing to ensure proper fit and function of parts.
Limits: Maximum and minimum acceptable dimensions for a part
Fits: Relationship between mating parts to ensure proper assembly
Tolerance: Allowable deviation from a specified dimension
Example: A shaft with a diameter of 25mm may have a tolerance of +/- 0.1mm for proper fit with a hole of 25.1mm
Q52. What ur strength?
My strength is my ability to lead and motivate a team towards achieving production targets.
Strong leadership skills
Effective communication
Ability to motivate team members
Experience in production management
Problem-solving skills
Attention to detail
Q53. What is electricity.
Electricity is the flow of electrons through a conductor.
Electricity is a form of energy that powers most of our modern devices.
It is created by the movement of electrons from one atom to another.
Electricity can be generated from various sources such as coal, wind, solar, and hydro power.
It can be dangerous if not handled properly and can cause electric shock or fire.
Electricity is measured in units of volts, amps, and watts.
Q54. What is welding
Q55. Lt switchgear system design
Lt switchgear system design involves the selection and arrangement of electrical components for low voltage power distribution.
Selection of appropriate switchgear components based on the electrical load requirements
Arrangement of switchgear components in a logical and safe manner
Consideration of fault protection and coordination with upstream and downstream equipment
Compliance with relevant standards and regulations
Examples of switchgear components include circuit breakers, f...read more
Q56. Cycle time of residential flat
The cycle time of a residential flat depends on various factors such as size, complexity, location, and availability of resources.
Cycle time can range from a few months to a few years depending on the project.
Factors such as obtaining permits, construction time, and finishing work can affect the cycle time.
Availability of resources such as labor, materials, and equipment can also impact the cycle time.
Location can also play a role in the cycle time as accessibility and transp...read more
Q57. 4 Pillars of oops
Encapsulation, Inheritance, Polymorphism, Abstraction are the 4 pillars of OOPs
Encapsulation: Bundling data and methods that operate on the data into a single unit
Inheritance: Ability of a class to inherit properties and behavior from another class
Polymorphism: Ability to present the same interface for different data types
Abstraction: Hiding the complex implementation details and showing only the necessary features
Q58. types of attributes
Attributes can be classified into two types: quantitative and qualitative.
Quantitative attributes are numerical and can be measured, such as height or weight.
Qualitative attributes are categorical and cannot be measured, such as color or type.
Attributes can also be classified as discrete or continuous, depending on the type of data they represent.
Top HR Questions asked in Devon Software Services
Interview Process at Devon Software Services
Top Interview Questions from Similar Companies
Reviews
Interviews
Salaries
Users/Month