AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
Filter interviews by
Godrej Industries Group ITI Electrician Interview Questions, Process, and Tips
Godrej Industries Group ITI Electrician Interview Experiences
1 interview found
Anonymous
Interview Questionnaire
7 Questions
- Q1. About electrical maintenance and experience.
- Q2. What is Mcb and mccb ?
- Ans.
Mcb stands for Miniature Circuit Breaker and MCCB stands for Molded Case Circuit Breaker.
Mcb is a type of circuit breaker that is used for low voltage applications.
MCCB is a type of circuit breaker that is used for high voltage applications.
Both Mcb and MCCB are used to protect electrical circuits from overloads and short circuits.
Mcb is usually rated for currents up to 100 amps, while MCCB can handle currents up to 25...
- Q3. What is different between current and voltage.
- Ans.
Current and voltage are two fundamental concepts in electricity. Current is the flow of electric charge, while voltage is the potential difference that drives the flow.
Current is the rate of flow of electric charge, measured in amperes (A).
Voltage is the force or pressure that pushes the electric charge to flow, measured in volts (V).
Current flows through a conductor, while voltage exists across a conductor.
Current is ...
- Q4. What is unit and how maser current and voltage ?
- Ans.
A unit is a standard measurement used to quantify physical quantities. Current is measured in amperes (A) and voltage is measured in volts (V).
A unit is a fixed quantity used as a standard of measurement.
Current is the flow of electric charge in a circuit and is measured in amperes (A).
Voltage is the electric potential difference between two points in a circuit and is measured in volts (V).
The unit of current, ampere, ...
- Q5. How many types of transformer ?
- Ans.
There are several types of transformers used in electrical systems.
Power Transformers
Distribution Transformers
Instrument Transformers
Auto Transformers
Isolation Transformers
Step-up and Step-down Transformers
Three-phase Transformers
Single-phase Transformers
- Q6. What is D.OL starter?
- Ans.
D.OL starter is a type of motor starter used to start and stop three-phase motors.
D.OL stands for Direct-On-Line.
It is the simplest and most common type of motor starter.
It directly connects the motor to the power supply, providing full voltage to the motor.
It is suitable for small to medium-sized motors.
It does not provide any protection against overloading or short circuits.
It is commonly used in applications such as
- Q7. What is amper?
- Ans.
An ampere (amp) is the unit of electric current in the International System of Units (SI).
Amperes measure the rate of flow of electric charge.
It is named after the French physicist André-Marie Ampère.
One ampere is defined as one coulomb of charge passing through a point in one second.
Amperes are used to measure the current flowing through electrical circuits.
Common household appliances like light bulbs and refrigerator...
Top trending discussions
Interview questions from similar companies
I applied via Newspaper Ad and was interviewed in Jul 2022. There were 3 interview rounds.
Electrical maintenance work
Experience in 5year
Complast sunmar
(4 Questions)
- Q1. IAM vijayabalan working in electrical maintenance work experience in 5
- Q2. Iam interest in Tata chemicals in cuddalore interview date
- Q3. Cuddalore in Tata chemicals
- Q4. Machine operator in Tata chemicals Any vacancies in company
Interview Preparation Tips
- ITI electrician
Machine operator in company interview date of Tata chemicals
Selected
I appeared for an interview in Jan 2024.
(1 Question)
- Q1. Motar, transform mcc,pcc,HT/lt
I applied via Referral and was interviewed before Aug 2021. There was 1 interview round.
(9 Questions)
- Q1. Why shuld i hire you?
- Q2. What you know about paint
- Ans.
Paint is a liquid or paste material used to add color and protection to surfaces.
Paint is made up of pigments, binders, solvents, and additives.
Different types of paint include oil-based, water-based, and latex.
Paint can be used for decorative purposes or to protect surfaces from damage.
Paint can be applied using brushes, rollers, or sprayers.
Common paint finishes include matte, satin, and gloss.
- Q3. What is finish goods ? What is tsd tank?
- Q4. 1kl is equals to what?
- Ans.
1kl is equal to 1000 liters.
1kl = 1000 liters
kl stands for kiloliter
Used to measure volume of liquids
- Q5. What is solvents ? What are the eliments of making paints?
- Ans.
Solvents are liquids used to dissolve or dilute other substances. Paints are made up of pigments, binders, solvents, and additives.
Solvents are used to dissolve or dilute other substances in order to create a solution.
Paints are made up of pigments, binders, solvents, and additives.
Common solvents used in paint making include mineral spirits, turpentine, and acetone.
Solvents are important in paint making because they h...
- Q6. What is excel and how its work? What is msds?
- Ans.
Excel is a spreadsheet software used for data analysis and management. MSDS stands for Material Safety Data Sheet.
Excel is used for organizing and analyzing data in a tabular format
It allows users to perform calculations, create charts and graphs, and automate tasks
MSDS is a document that provides information about the properties and hazards of a chemical substance
It includes information on handling, storage, and emerg...
- Q7. What is descripency report mean?and how it make what is the key point to make it?why its needed?
- Ans.
A discrepancy report is a document that highlights differences between two sets of data and identifies the reasons for the differences.
A discrepancy report is used to identify and resolve discrepancies between two sets of data.
It is important to include the reasons for the discrepancies in the report.
Examples of discrepancies include differences in inventory counts or financial statements.
The report should be clear and...
- Q8. Do you know any industrial norms? What is sefty stand for and what are the precautions should maintained?
- Ans.
Industrial norms include safety standards that must be maintained to ensure workplace safety.
Safety standards are guidelines set by regulatory bodies to ensure safe working conditions.
Precautions include wearing appropriate personal protective equipment, following safety procedures, and reporting any hazards.
Examples of safety standards include OSHA in the US and ISO in Europe.
Safety standards cover areas such as elect...
- Q9. What is oracal and what you know about Oracle and how its work(practical)
Interview Preparation Tips
- Paint
- Material Management
- Project Management
- Human Resource Management
- Industrial Relations
- Current affair
- Oracle
- Excel
- MS Office
- Office Management
Skills evaluated in this interview
I applied via Walk-in and was interviewed before Oct 2021. There were 3 interview rounds.
Its all about the overview of marketing
(2 Questions)
- Q1. Whether Capable to perform a task or not?
- Q2. How much salary do you Expect from our company?
Interview Preparation Tips
Be confident
Keep eye contact
Make a perfect resume mentioning suitable skills and perfect objective .
I applied via Recruitment Consultant and was interviewed in May 2021. There were 4 interview rounds.
Interview Questionnaire
1 Question
- Q1. Basic technical questions about the industry.
Interview Preparation Tips
I applied via Referral and was interviewed in Mar 2021. There were 3 interview rounds.
Interview Questionnaire
2 Questions
- Q1. Relevant information regarding your previous experience
- Q2. Technically what knowledge you have
Interview Preparation Tips
I applied via Walk-in and was interviewed in Dec 2020. There was 1 interview round.
Interview Questionnaire
1 Question
- Q1. Glass line reactor mechanical seal fitting parameter
- Ans.
Glass line reactor mechanical seal fitting parameters are critical for ensuring proper functioning and preventing leaks.
The fitting parameters depend on the type of mechanical seal being used.
Factors such as seal face material, seal face loading, and seal face geometry must be considered.
Proper installation and alignment of the mechanical seal is also important.
Regular maintenance and monitoring of the seal is necessar...
Interview Preparation Tips
Consenrtycity chek
Seqvernetion chek
I applied via Recruitment Consultant and was interviewed before Oct 2020. There was 1 interview round.
Interview Questionnaire
1 Question
- Q1. Experience in Piping Design tool
- Ans.
I have extensive experience in using various piping design tools.
Proficient in using AutoCAD for piping design
Familiar with 3D modeling software like SolidWorks for creating detailed piping layouts
Skilled in using piping design software such as Caesar II for stress analysis
Experience in using PDMS (Plant Design Management System) for piping design and layout
Knowledge of industry standards and codes related to piping de
Interview Preparation Tips
Interview Questionnaire
1 Question
- Q1. Electirican questions
Godrej Industries Group Interview FAQs
Tell us how to improve this page.
Godrej Industries Group Interviews By Designations
- Godrej Industries Group Deputy Manager Interview Questions
- Godrej Industries Group Safety Officer Interview Questions
- Godrej Industries Group Assistant Manager Interview Questions
- Godrej Industries Group Production Engineer Interview Questions
- Godrej Industries Group Senior Manager Interview Questions
- Godrej Industries Group Senior Officer Interview Questions
- Godrej Industries Group Marketing Manager Interview Questions
- Godrej Industries Group Software Developer Interview Questions
- Show more
Interview Questions for Popular Designations
- Electrician Interview Questions
- ITI Electrician, Electrical Maintenance Interview Questions
- Maintenance Electrician Interview Questions
- Senior Electrician Interview Questions
- Industrial Electrician Interview Questions
- Electrician Maintenance Technician Interview Questions
- Electrical Technician Electrician Interview Questions
- ITI Electrician Maintenance Interview Questions
- Show more
Interview Questions from Similar Companies
Fast track your campus placements
Godrej Industries Group ITI Electrician Reviews and Ratings
based on 2 reviews
Rating in categories
|
Assistant Manager
154
salaries
|  ₹4 L/yr - ₹15.6 L/yr |
|
Deputy Manager
79
salaries
| ₹7 L/yr - ₹17 L/yr |
|
Manager
37
salaries
| ₹7 L/yr - ₹25 L/yr |
|
Sales Executive
30
salaries
| ₹1.2 L/yr - ₹6.5 L/yr |
|
Senior Executive
29
salaries
| ₹4.2 L/yr - ₹13.2 L/yr |
Asian Paints
Berger Paints
Pidilite Industries
SRF
- Home >
- Interviews >
- Godrej Industries Group Interview Questions >
- Godrej Industries Group ITI Electrician Interview Questions
