Upload Button Icon Add office photos

Gayatri Projects

Compare button icon Compare button icon Compare

Filter interviews by

Gayatri Projects Sr DGM Interview Questions, Process, and Tips

Updated 21 Mar 2023

Gayatri Projects Sr DGM Interview Experiences

1 interview found

Sr DGM Interview Questions & Answers

user image Anonymous

posted on 19 Mar 2023

Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - Technical 

(5 Questions)

  • Q1. How dynamic pressures acts on the supports
  • Ans. 

    Dynamic pressures act on supports by exerting force and causing movement.

    • Dynamic pressures are caused by fluid flow or wind gusts.

    • These pressures can cause vibrations and oscillations in the structure.

    • Supports must be designed to withstand these forces and prevent failure.

    • Examples of supports include beams, columns, and braces in buildings and bridges.

    • Proper analysis and testing is necessary to ensure the safety and st

  • Answered by AI
  • Q2. What is forward snaking and reverse snaking
  • Ans. 

    Forward snaking and reverse snaking are techniques used in cable laying.

    • Forward snaking involves pulling a cable through a conduit from one end to the other.

    • Reverse snaking involves pushing a cable through a conduit from one end to the other.

    • Both techniques are used to lay cables in tight spaces or areas with limited access.

    • Reverse snaking is often used when the cable needs to be protected from damage during installati...

  • Answered by AI
  • Q3. What is creep control ? And how to control creep?
  • Ans. 

    Creep control is the process of preventing or reducing the deformation of a material under a constant load over time.

    • Creep is a phenomenon where a material deforms over time under a constant load or stress.

    • Creep can be controlled by reducing the temperature, decreasing the load or stress, or using materials with higher strength.

    • For example, in the aerospace industry, creep control is important for preventing deformatio...

  • Answered by AI
  • Q4. How do calculate the production in the longwall?
  • Ans. 

    Production in longwall is calculated by measuring the amount of coal extracted per unit time.

    • Measure the amount of coal extracted per unit time

    • Calculate the production rate by dividing the amount of coal extracted by the time taken

    • Use sensors and monitoring systems to track the production

    • Adjust the longwall cutting speed and depth to optimize production

  • Answered by AI
  • Q5. What is meant by staggering in longwalls?
  • Ans. 

    Staggering in longwalls refers to the practice of leaving pillars of coal between adjacent panels to provide support.

    • Staggering is a technique used in longwall mining to prevent the collapse of the roof and walls of the mine.

    • It involves leaving pillars of coal between adjacent panels to provide support.

    • The size and shape of the pillars depend on the geology of the mine and the equipment used.

    • Staggering can help to incr...

  • Answered by AI
Round 3 - Technical 

(2 Questions)

  • Q1. What is horizon control and what are the effects if horizon not maintained well.
  • Ans. 

    Horizon control refers to maintaining the aircraft's pitch and roll angles. Poor maintenance can lead to loss of control and accidents.

    • Horizon control is the process of maintaining the aircraft's pitch and roll angles using instruments such as the attitude indicator and artificial horizon.

    • If the horizon is not maintained well, the aircraft can lose control and enter into dangerous attitudes such as a stall or spin.

    • Poor...

  • Answered by AI
  • Q2. What is the main fall and periodic fall
  • Ans. 

    The question is unclear and lacks context. It is not related to any specific field.

    • The question needs clarification on what is being referred to as 'fall'

    • It is unclear whether the question is related to a specific field or industry

    • Without more information, it is difficult to provide a meaningful answer

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Answers must be clear, understandable and maintain the eye contact with the interviewer.

Skills evaluated in this interview

Interview questions from similar companies

I applied via Recruitment Consultant and was interviewed before Oct 2020. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. About the background

Interview Preparation Tips

Interview preparation tips for other job seekers - Please have good job knowledge
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
4-6 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Aug 2024. There were 2 interview rounds.

Round 1 - Technical 

(2 Questions)

  • Q1. Experience about finishing work of building project.
  • Ans. 

    I have extensive experience in overseeing the finishing work of building projects, ensuring high quality and timely completion.

    • Managed finishing work such as painting, flooring, and fixtures to meet project deadlines

    • Coordinated with subcontractors and vendors to ensure materials and labor were on schedule

    • Implemented quality control measures to maintain high standards of workmanship

    • Resolved any issues or discrepancies d...

  • Answered by AI
  • Q2. What is DPR? What is DLP period?
  • Ans. 

    DPR stands for Daily Progress Report. DLP period refers to Data Loss Prevention period.

    • DPR is a report that documents the daily progress of a project, including tasks completed, challenges faced, and plans for the next day.

    • DLP period is the time frame during which Data Loss Prevention measures are in effect to protect sensitive information from unauthorized access or disclosure.

  • Answered by AI
Round 2 - HR 

(2 Questions)

  • Q1. Why I want to do job change?
  • Ans. 

    Seeking new challenges, growth opportunities, and a better work-life balance.

    • Looking for new challenges and opportunities to grow professionally.

    • Seeking a better work-life balance.

    • Interested in working with new technologies or industries.

    • Want to expand my skill set and knowledge.

    • Seeking a more supportive or collaborative work environment.

  • Answered by AI
  • Q2. What is your expectations of CTC?
  • Ans. 

    I expect a competitive salary based on my experience, skills, and the market standards.

    • Expectation of a salary package that reflects my qualifications and experience

    • Consideration of market standards and industry norms

    • Open to negotiation based on additional benefits or perks offered

    • Looking for a fair and transparent compensation structure

  • Answered by AI
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
4-6 weeks
Result
Selected Selected

I applied via Referral and was interviewed before Nov 2022. There were 2 interview rounds.

Round 1 - Technical 

(2 Questions)

  • Q1. About structure
  • Q2. About job responsibilities of role of previous designation
Round 2 - Technical 

(1 Question)

  • Q1. About responsibility and role of previous job
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Billing codes to be followed
  • Ans. 

    Billing codes are determined by the organization and industry standards.

    • Billing codes are used to identify specific products or services provided by an organization.

    • The codes are typically determined by the organization and may also follow industry standards.

    • Examples of billing codes include CPT codes for medical procedures and UPC codes for retail products.

  • Answered by AI
  • Q2. IS 1200, it is in different part.
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I appeared for an interview before Nov 2022.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Earth moving Equipment, crusher plant,hotmix plant concrete plant, operation and maintenance
  • Q2. Plant and equipment related
Interview experience
3
Average
Difficulty level
Easy
Process Duration
-
Result
Selected Selected

I applied via Job Portal

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(3 Questions)

  • Q1. How many year experience ?
  • Q2. How to use bentonite use before pulsing
  • Ans. 

    Bentonite is used as a drilling fluid to stabilize boreholes before pulsing.

    • Bentonite is mixed with water to form a slurry and pumped into the borehole.

    • The slurry fills the borehole and stabilizes the walls, preventing collapse.

    • After the bentonite has set, pulsing can be done without the risk of borehole collapse.

    • Pulsing is a technique used in geophysical exploration to measure the properties of the subsurface.

  • Answered by AI
  • Q3. 1.03 mgl to 1.10 mgl

Interview Preparation Tips

Interview preparation tips for other job seekers - Piling work(550mm,600mm,750mm and 1000mm dia pile),survey,Client bills
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Referral and was interviewed in Jan 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Productivity of Machinery & Manpower
  • Ans. 

    Productivity of machinery and manpower is crucial for efficient operations.

    • Efficient machinery and skilled manpower can increase productivity.

    • Regular maintenance of machinery can prevent downtime and increase productivity.

    • Proper training and motivation of manpower can also improve productivity.

    • Use of automation and technology can further enhance productivity.

    • Productivity can be measured using metrics such as output per

  • Answered by AI
  • Q2. Standard thumb rule in estimation
  • Ans. 

    Standard thumb rule in estimation

    • Thumb rule is a rough estimate based on experience

    • It is not accurate and can vary based on project

    • Example: 1 hour per page for content writing

    • Example: 1 month per developer for a software project

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Be precise and accurate. Information of planning software.
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
6-8 weeks
Result
Not Selected

I applied via Job Fair and was interviewed before Apr 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(3 Questions)

  • Q1. Naaa g g g g
  • Q2. Dddd fvv fffh hhhb
  • Q3. Fggg gghh ggghbhbbbbb hhhhh

I applied via Naukri.com and was interviewed before Aug 2020. There were 4 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. How to start a new project ?

Interview Preparation Tips

Interview preparation tips for other job seekers - Just say what are you doing in the past and what you can do.

Gayatri Projects Interview FAQs

How many rounds are there in Gayatri Projects Sr DGM interview?
Gayatri Projects interview process usually has 3 rounds. The most common rounds in the Gayatri Projects interview process are Technical and Resume Shortlist.
What are the top questions asked in Gayatri Projects Sr DGM interview?

Some of the top questions asked at the Gayatri Projects Sr DGM interview -

  1. What is horizon control and what are the effects if horizon not maintained we...read more
  2. What is creep control ? And how to control cre...read more
  3. What is forward snaking and reverse snak...read more

Tell us how to improve this page.

Gayatri Projects Sr DGM Interview Process

based on 1 interview

Interview experience

5
  
Excellent
View more

Interview Questions from Similar Companies

L&T Construction Interview Questions
4.0
 • 746 Interviews
AtkinsRealis Interview Questions
4.0
 • 87 Interviews
GMR Group Interview Questions
4.0
 • 80 Interviews
Ashoka Buildcon Interview Questions
4.0
 • 65 Interviews
View all
Senior Engineer
73 salaries
unlock blur

₹3.6 L/yr - ₹8.4 L/yr

Highway Engineer
64 salaries
unlock blur

₹2.4 L/yr - ₹5.9 L/yr

Civil Site Engineer
47 salaries
unlock blur

₹1.6 L/yr - ₹5.4 L/yr

Junior Engineer
46 salaries
unlock blur

₹1.6 L/yr - ₹3.9 L/yr

Civil Engineer
46 salaries
unlock blur

₹2.5 L/yr - ₹5.4 L/yr

Explore more salaries
Compare Gayatri Projects with

L&T Construction

4.0
Compare

Simplex Infrastructures

3.4
Compare

ITD Cementation India

4.3
Compare

Ashoka Buildcon

4.1
Compare
Did you find this page helpful?
Yes No
write
Share an Interview