Escorts Kubota Limited Quality Engineer Interview Questions, Process, and Tips

Q1. Measuring of gear instuments
Ans. 
Measuring gear instruments involves using precision tools to ensure accurate dimensions and performance.
• Use micrometers and calipers to measure gear dimensions

• Check gear tooth profiles with gear measurement machines

• Verify gear hardness with hardness testers

• Inspect gear surface finish with profilometers
Answered by AI
Add your answer
Q2. What is A.P.G. used
Ans. 
A.P.G. is used in Quality Engineering to measure the accuracy and precision of a measurement system.
• A.P.G. stands for Average and Range Method.

• It is used to evaluate the variation in measurements taken by a measurement system.

• The Average is the central tendency of the measurements, while the Range is the spread of the measurements.

• A.P.G. helps in determining if a measurement system is capable of producing accurate and ...read more
Answered by AI
Add your answer
Q3. What is Yoke Poke
Ans. 
Yoke Poke is a term used in quality engineering to describe a method of testing the strength and durability of a product.
• Yoke Poke involves applying pressure or force to a product to see if it can withstand the intended use without breaking or failing.

• It is commonly used in industries such as automotive, aerospace, and manufacturing to ensure product reliability.

• For example, in automotive testing, a yoke poke test may ...read more
Answered by AI
Add your answer
Q4. Kaizen is most important in plant
Add your answer
Q5. Safety is 1st and quality is must
Add your answer

Q1. Self introduction
Add your answer
Q2. Self introduction and quality basis questions
Add your answer

Q1. Difference between quality control and quality assurance ?
Ans. 
Quality control focuses on identifying defects in products, while quality assurance focuses on preventing defects from occurring.
• Quality control involves inspecting products to identify defects and ensure they meet standards

• Quality assurance involves implementing processes and systems to prevent defects from occurring in the first place

• Quality control is reactive, while quality assurance is proactive

• Examples: Quality c...read more
Answered by AI
Add your answer
Q2. What is 7 QC Tools ?
Ans. 
7 QC Tools are a set of basic statistical tools used for quality control and process improvement.
• Check sheet: Used to collect and analyze data in real time

• Histogram: Represents data distribution visually

• Pareto chart: Helps identify the most significant factors affecting a problem

• Cause-and-effect diagram: Identifies potential causes of a problem

• Scatter diagram: Shows the relationship between two variables

• Control chart: ...read more
Answered by AI
Add your answer
Q3. What is least count ?
Ans. 
Least count is the smallest measurement that can be made by a measuring instrument.
• Least count is determined by the smallest division on the scale of the measuring instrument.

• It helps in determining the precision of the instrument.

• For example, if a ruler has smallest division of 1 mm, its least count is 1 mm.

• In vernier calipers, the least count is calculated as the difference between one smallest division on the main s
Answered by AI
Add your answer
Q4. Define Material categor.
Ans. 
Material categorization is the process of grouping materials based on their characteristics, properties, and intended use.
• Materials are categorized based on their composition, properties, and function

• Common categories include metals, polymers, ceramics, and composites

• Materials can also be categorized based on their physical, mechanical, and chemical properties

• Categorization helps in organizing materials for easier iden
Answered by AI
Add your answer

In group 2 and 3 members for interview which discussed with the candidate about his experience knowledge.

Q1. HR ask about job security and about condidate family background.
Add your answer

Q1. What is GD&T And Why used in quality?
Ans. 
GD&T stands for Geometric Dimensioning and Tolerancing. It is used to define and communicate engineering tolerances.
• GD&T is a symbolic language used to specify the size, shape, orientation, and location of features on a part.

• It ensures that parts are manufactured to the correct dimensions and fit together properly.

• GD&T is used in quality to improve communication between design, engineering, and manufacturing teams.

• It h...read more
Answered by AI
View 1 more answer
Q2. MS Excel commands used ?
Ans. 
MS Excel commands used?
• Data sorting and filtering

• Conditional formatting

• Pivot tables and charts

• VLOOKUP and HLOOKUP functions

• IF and SUM functions
Answered by AI
Add your answer
Q3. What is the casting process?
Ans. 
Casting is a manufacturing process in which a liquid material is poured into a mold, allowed to solidify, and then removed from the mold.
• The liquid material can be metal, plastic, or ceramic.

• The mold is typically made of sand, plaster, or metal.

• The casting process can be used to create complex shapes and parts.

• Examples of cast parts include engine blocks, turbine blades, and jewelry.

• The process can be done using gravit...read more
Answered by AI
Add your answer
Q4. What is forging process?
Ans. 
Forging is a manufacturing process where metal is shaped by applying compressive forces using a hammer or press.
• Metal is heated to a high temperature to make it malleable

• The metal is then shaped using a hammer or press

• Forging can be done using different techniques such as open die forging, closed die forging, and seamless ring rolling

• Forging is used to create high-strength components for various industries such as aero
Answered by AI
Add your answer
Q5. What is least Count of vernier Calliper?
Ans. 
The least count of a vernier caliper is the smallest measurement that can be read on the scale.
• The least count is determined by the number of divisions on the vernier scale and the main scale.

• It is usually expressed in fractions of a millimeter or inch.

• For example, a vernier caliper with 20 divisions on the vernier scale and 1mm on the main scale has a least count of 0.05mm.

• The least count is important for accurate mea...read more
Answered by AI
View 1 more answer
Q6. Sheet Meatals Defect?
Add your answer