Filter interviews by
Reinforcement and rebar are steel bars used to reinforce concrete structures. They are commonly used in block work.
Reinforcement and rebar are used to provide tensile strength to concrete structures.
They are commonly used in block work to reinforce the walls and provide stability.
Rebar is typically made of carbon steel and is available in various sizes and shapes.
The size and spacing of the rebar depend on the design a...
posted on 26 Jan 2025
I applied via LinkedIn and was interviewed before Jul 2020. There was 1 interview round.
I applied via Company Website and was interviewed before Oct 2020. There were 4 interview rounds.
SFD & BMD for a simply supported load
SFD is a diagram that shows the variation of shear force along the length of a beam
BMD is a diagram that shows the variation of bending moment along the length of a beam
For a simply supported load, the SFD will be a straight line with a constant slope
The BMD will be a parabolic curve with the maximum value at the center of the beam
The SFD and BMD can be calculated using equations an
I applied via Approached by Company and was interviewed before Mar 2021. There was 1 interview round.
I applied via Approached by Company and was interviewed before Jun 2021. There were 3 interview rounds.
I appeared for an interview in Jul 2024.
Basic questions for civil engineers included topics from Structural Engineering, Surveying, Geotechnical Engineering, and Concrete Technology.
Density of steel, concrete, bricks
Steel: 7850 kg/m^3
Concrete: 2400 kg/m^3
Bricks: 1900-2100 kg/m^3
Various types of equipment such as levels, theodolites, and total stations are used for leveling. Different types of surveys include topographic, construction, and boundary surveys.
Equipment used for leveling include levels, theodolites, and total stations
Levels are used for basic leveling tasks, theodolites for measuring angles and distances, and total stations for combined angle and distance measurements
Types of surv...
Different types of cement include Portland cement, rapid hardening cement, low heat cement, and sulfate resisting cement.
Portland cement is the most common type used in construction.
Rapid hardening cement sets quickly and gains strength faster than other types.
Low heat cement generates less heat during hydration, making it suitable for large concrete structures.
Sulfate resisting cement is used in environments with high
I appeared for an interview in Dec 2024.
SBC stands for Safe Bearing Capacity.
SBC is the maximum pressure that can be applied to the soil without causing shear failure.
It is an important factor in the design of foundations for structures.
Example: The SBC of a particular soil type is 200 kN/m^2.
Different RLs can be found by measuring the vertical distance between points on the figure.
Measure the vertical distance between points A and B to find RL AB
Measure the vertical distance between points C and D to find RL CD
Measure the vertical distance between points E and F to find RL EF
The diameter of a Tunnel Boring Machine (TBM) varies depending on the project requirements and can range from a few meters to over 15 meters.
The diameter of a TBM is typically determined by the size of the tunnel being constructed.
TBMs used for subway tunnels may have a smaller diameter compared to those used for large transportation tunnels.
Some TBMs can have diameters exceeding 15 meters for mega tunneling projects.
T...
I appeared for an interview in Jul 2024.
Experienced civil engineer with a passion for sustainable infrastructure projects.
Graduated with a degree in Civil Engineering from XYZ University
Worked for 5 years at ABC Construction Company on various projects
Specialize in structural design and project management
Passionate about incorporating green building practices into projects
I completed a 6-month internship at a construction firm where I worked on various projects under the guidance of senior engineers.
Assisted in site inspections and surveys
Prepared design drawings using AutoCAD
Assisted in project planning and scheduling
Participated in meetings with clients and contractors
Learned about construction materials and techniques
I applied via Walk-in and was interviewed before Mar 2023. There was 1 interview round.
Water treatment plant process involves several steps to remove impurities and make water safe for consumption.
Coagulation: Chemicals are added to water to make impurities clump together.
Sedimentation: The clumped impurities settle at the bottom of the tank.
Filtration: Water passes through layers of sand, gravel, and charcoal to remove remaining impurities.
Disinfection: Chlorine or other chemicals are added to kill bact...
based on 1 interview
Interview experience
based on 6 reviews
Rating in categories
Accountant
8
salaries
| ₹4.2 L/yr - ₹5.9 L/yr |
Accounts Officer
7
salaries
| ₹5 L/yr - ₹6.5 L/yr |
Assistant Manager
7
salaries
| ₹5.5 L/yr - ₹9.5 L/yr |
Fire & Safety Officer
7
salaries
| ₹6 L/yr - ₹9.2 L/yr |
Company Secretary
7
salaries
| ₹3.6 L/yr - ₹8.2 L/yr |
Sobha
Lodha Group
Cushman & Wakefield
Godrej Properties