Upload Button Icon Add office photos

Filter interviews by

EQuad Engineering Services new Product Development Engineer Interview Questions, Process, and Tips for Experienced

Updated 11 Feb 2023

EQuad Engineering Services new Product Development Engineer Interview Experiences for Experienced

1 interview found

Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed before Feb 2022. There were 2 interview rounds.

Round 1 - Technical 

(8 Questions)

  • Q1. Calculation of gear ratio,
  • Ans. 

    Gear ratio is the ratio of the number of teeth on the driven gear to the number of teeth on the driving gear.

    • Count the number of teeth on the driving gear (gear attached to the motor) and the driven gear (gear attached to the load)

    • Divide the number of teeth on the driven gear by the number of teeth on the driving gear to get the gear ratio

    • For example, if the driving gear has 20 teeth and the driven gear has 40 teeth, t

  • Answered by AI
  • Q2. Mechanical advantage of pulley
  • Ans. 

    Pulley provides mechanical advantage by reducing the amount of force required to lift a load.

    • A pulley system can have multiple pulleys to increase mechanical advantage

    • The mechanical advantage of a pulley is equal to the number of supporting ropes or cables

    • Pulleys can change the direction of the force applied to lift a load

    • Examples of pulleys include cranes, elevators, and flagpoles

  • Answered by AI
  • Q3. Relationship between Potential and Kinetic energy in bernoulli's theorem
  • Ans. 

    Bernoulli's theorem states that potential energy decreases as kinetic energy increases in a fluid flow.

    • Bernoulli's theorem is based on the conservation of energy in a fluid flow.

    • Potential energy is the energy possessed by a fluid due to its position or elevation.

    • Kinetic energy is the energy possessed by a fluid due to its motion.

    • As the velocity of a fluid increases, its kinetic energy increases and its potential energy...

  • Answered by AI
  • Q4. Identification of 1st and 3rd angle projection symbols
  • Ans. 

    1st and 3rd angle projection symbols are used in engineering drawings to indicate the orientation of the object being depicted.

    • 1st angle projection symbol is a triangle with the number '1' inside and is used in Europe and Asia.

    • 3rd angle projection symbol is a triangle with the number '3' inside and is used in North America.

    • The symbol is usually placed in the lower right-hand corner of the drawing.

    • The symbol indicates t...

  • Answered by AI
  • Q5. Difference between relative humidity, absolute humidity and saturation humidity
  • Ans. 

    Relative humidity is the ratio of actual water vapor present in the air to the maximum amount of water vapor air can hold at a given temperature.

    • Absolute humidity is the actual amount of water vapor present in the air.

    • Saturation humidity is the maximum amount of water vapor air can hold at a given temperature.

    • Relative humidity and absolute humidity are measured in percentage while saturation humidity is measured in gra...

  • Answered by AI
  • Q6. Draw orthographic projections of the given isometric view
  • Ans. 

    Draw orthographic projections of given isometric view.

    • Identify the isometric view and its orientation

    • Draw the front, top, and right views using the correct scale and proportions

    • Ensure that all lines are parallel and dimensions are accurate

    • Label each view with the appropriate dimensions and notes

    • Check for any errors or inconsistencies

  • Answered by AI
  • Q7. Types of tolerances and fits
  • Ans. 

    Tolerances and fits are important in product development. Tolerances refer to the allowable variation in dimensions, while fits describe the degree of interference between mating parts.

    • Tolerances can be classified as either unilateral or bilateral

    • Fits can be classified as clearance, interference, or transition

    • Examples of fits include press fit, slip fit, and force fit

  • Answered by AI
  • Q8. List the surface finish symbols and its significance
  • Ans. 

    Surface finish symbols are used to indicate the type of surface finish required for a part.

    • Surface finish symbols are typically represented by a series of lines, circles, and triangles.

    • The symbols are used to indicate the type of surface finish required for a part, such as roughness, waviness, or lay.

    • Examples of surface finish symbols include Ra for roughness average, Rz for roughness depth, and W for waviness.

  • Answered by AI
Round 2 - HR 

(4 Questions)

  • Q1. Introduce yourself.....
  • Ans. 

    I am a Product Development Engineer with expertise in designing and developing new products.

    • I have a strong background in engineering and product design.

    • I am skilled in using CAD software to create 3D models and prototypes.

    • I have experience in conducting product testing and analysis to ensure quality and performance.

    • I am familiar with the product development lifecycle and have successfully brought several products to m...

  • Answered by AI
  • Q2. Why did you choose engineering?
  • Ans. 

    I chose engineering because I have always been fascinated by how things work and wanted to be involved in creating innovative solutions.

    • Passion for problem-solving and curiosity about technology

    • Desire to make a positive impact on society through innovation

    • Enjoyment of hands-on work and building things

    • Inspiration from influential engineers or role models

    • Opportunity for continuous learning and growth

  • Answered by AI
  • Q3. What makes you a good fit for our company?
  • Ans. 

    I am a good fit for your company because of my strong technical skills, experience in product development, and ability to work well in a team.

    • Strong technical skills: I have a solid foundation in engineering principles and have experience with various product development tools and technologies.

    • Experience in product development: I have successfully developed and launched several products in my previous roles, demonstrat...

  • Answered by AI
  • Q4. What are your salary expectations?
  • Ans. 

    I am open to discussing salary based on the responsibilities and market value for the role.

    • I am flexible and open to negotiation.

    • I would like to be compensated fairly for my skills and experience.

    • I am aware of the industry standards and would like to align my expectations accordingly.

    • I am more interested in the overall compensation package, including benefits and growth opportunities.

  • Answered by AI

Interview Preparation Tips

Topics to prepare for EQuad Engineering Services new Product Development Engineer interview:
  • Engineering mechanics
  • Thermodynamics
  • Heat Transfer
  • Fluid Dynamics
  • Engineering graphics
  • Physics
Interview preparation tips for other job seekers - Have strong understanding of engineering principles. Also have a basic design knowledge and GD&T if you are an experienced candidate.

Interview questions from similar companies

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Not Selected

I applied via Naukri.com and was interviewed in Aug 2024. There were 5 interview rounds.

Round 1 - Aptitude Test 

Kindly plan to -Online mode

Round 2 - Technical 

(3 Questions)

  • Q1. About work experience
  • Q2. About work experience in manufacturing
  • Q3. Privious company workload and backgrounds
  • Ans. 

    I have experience working in a fast-paced environment with high workload, handling multiple projects simultaneously.

    • Managed workload effectively by prioritizing tasks based on deadlines and importance

    • Collaborated with team members to ensure projects were completed on time and within budget

    • Background in designing mechanical components for automotive industry at XYZ Company

    • Experience working on projects with tight deadli

  • Answered by AI
Round 3 - HR 

(2 Questions)

  • Q1. Family background,and privious company background
  • Q2. Salary related & company policy
Round 4 - Case Study 

Pratical rest in design related

Round 5 - Group Discussion 

Group discussion with management team

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Not Selected

I applied via Naukri.com and was interviewed in Aug 2024. There were 4 interview rounds.

Round 1 - Aptitude Test 

Kindly arrange the aptitude test is Online mode

Round 2 - Technical 

(3 Questions)

  • Q1. Current work load
  • Ans. 

    Currently managing multiple projects with varying deadlines and priorities.

    • Balancing workload by prioritizing tasks based on deadlines and importance

    • Utilizing project management tools to track progress and allocate resources efficiently

    • Communicating with team members and stakeholders to ensure alignment on project goals and timelines

  • Answered by AI
  • Q2. About the company related work
  • Q3. About working experience and current working details
Round 3 - HR 

(2 Questions)

  • Q1. Family background & privious company background
  • Q2. Salary & company policy
Round 4 - Group Discussion 

Metting with top management

Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. What is bgp protocol
  • Ans. 

    BGP (Border Gateway Protocol) is a standardized exterior gateway protocol used to exchange routing information between different autonomous systems on the internet.

    • BGP is used to make routing decisions based on network policies, rules, and attributes.

    • It is a path vector protocol that allows routers to share information about the best path to reach a certain destination network.

    • BGP operates on TCP port 179 and uses TCP ...

  • Answered by AI
  • Q2. What is ospf protocol
  • Ans. 

    OSPF (Open Shortest Path First) is a routing protocol used to find the best path for data packets in IP networks.

    • OSPF is a link-state routing protocol

    • It uses Dijkstra's algorithm to calculate the shortest path

    • OSPF routers exchange link-state advertisements (LSAs) to build a topology database

    • It supports VLSM (Variable Length Subnet Masking) and CIDR (Classless Inter-Domain Routing)

  • Answered by AI

Skills evaluated in this interview

Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Approached by Company

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Questions regarding different CAD softwares
  • Q2. Questions regarding automobile parts
Round 3 - Design Test 

(1 Question)

  • Q1. Designing of different Parts in UG NX
  • Ans. 

    Designing of different parts in UG NX

    • UG NX is a computer-aided design software used for designing various parts

    • Designing parts in UG NX involves creating 3D models, defining dimensions, and adding features

    • The software offers a wide range of tools and features for efficient part design

    • Examples of parts that can be designed in UG NX include mechanical components, electrical enclosures, and consumer products

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Practice designing of sheet metal parts and Automobile Plastic components in UG NX and CATIA.

Skills evaluated in this interview

Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. Your self introduction
  • Q2. Software skill about catia

Interview Preparation Tips

Interview preparation tips for other job seekers - Good
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed before Jun 2023. There was 1 interview round.

Round 1 - Technical 

(5 Questions)

  • Q1. 1. Creo related all questions 2. GD&T 3. sheet metal / casting 4. Basic engineering questions
  • Q2. Hole to hole distance ( max/min) with a feature control frame with MMC modifier at specific diameter
  • Ans. 

    The hole to hole distance with a feature control frame with MMC modifier at a specific diameter is determined by the geometric tolerance specified in the feature control frame.

    • The maximum and minimum distances between the holes are determined by the size of the feature control frame and the MMC modifier.

    • The MMC modifier allows for the maximum material condition of the part, which affects the allowable tolerance for the...

  • Answered by AI
  • Q3. Explain bonus tolerance concept.
  • Ans. 

    Bonus tolerance is an additional tolerance allowed beyond the basic tolerance to ensure proper fit and function of parts.

    • Bonus tolerance is used to compensate for variations in manufacturing processes or materials.

    • It is typically added to the upper limit of the basic tolerance to ensure proper functionality.

    • Bonus tolerance is often specified in engineering drawings to ensure parts can still fit together within acceptab...

  • Answered by AI
  • Q4. Detailed explanation of a feature control frame.
  • Ans. 

    A feature control frame is a symbol used in engineering drawings to specify geometric tolerances and control the location, orientation, and form of features.

    • It consists of geometric characteristic symbols, tolerance values, and datum references.

    • The geometric characteristic symbol indicates the type of tolerance (e.g. position, concentricity, flatness).

    • Tolerance values specify the allowable deviation from the perfect ge...

  • Answered by AI
  • Q5. What is the similarity of circularity and circular run out?
  • Ans. 

    Circularity and circular run out are both measurements of how well a circular object conforms to its intended shape.

    • Circularity measures the overall roundness of a circle, while circular run out measures the variation in the center point of the circle as it rotates.

    • Both measurements are important in ensuring the proper functioning of rotating parts in machinery.

    • For example, in a car engine, circularity ensures that pis...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare well. Maintain good communication.

Skills evaluated in this interview

Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
Selected Selected
Round 1 - Case Study 

Explain your current projects roles

Round 2 - Technical 

(1 Question)

  • Q1. Various question based on your current role

I applied via Naukri.com and was interviewed in Jan 2021. There was 1 interview round.

Interview Questionnaire 

2 Questions

  • Q1. Communication round
  • Q2. Technical round

Interview Preparation Tips

Interview preparation tips for other job seekers - Be prepared present the communication in good way

Interview Questionnaire 

1 Question

  • Q1. Why do you resigned previous job

Interview Preparation Tips

Round: Resume Shortlist
Experience: Tell me about your self, I tried to speak him but trigl the words due to fear.
Tips: I think to attend more interview

EQuad Engineering Services Interview FAQs

How many rounds are there in EQuad Engineering Services new Product Development Engineer interview for experienced candidates?
EQuad Engineering Services interview process for experienced candidates usually has 3 rounds. The most common rounds in the EQuad Engineering Services interview process for experienced candidates are Resume Shortlist, Technical and HR.
What are the top questions asked in EQuad Engineering Services new Product Development Engineer interview for experienced candidates?

Some of the top questions asked at the EQuad Engineering Services new Product Development Engineer interview for experienced candidates -

  1. list the surface finish symbols and its significa...read more
  2. identification of 1st and 3rd angle projection symb...read more
  3. draw orthographic projections of the given isometric v...read more

Tell us how to improve this page.

People are getting interviews through

based on 1 EQuad Engineering Services interview
WalkIn
100%
Low Confidence
?
Low Confidence means the data is based on a small number of responses received from the candidates.

Interview Questions from Similar Companies

TCS Interview Questions
3.7
 • 10.1k Interviews
Accenture Interview Questions
3.9
 • 7.8k Interviews
Infosys Interview Questions
3.7
 • 7.4k Interviews
Wipro Interview Questions
3.7
 • 5.5k Interviews
Cognizant Interview Questions
3.8
 • 5.4k Interviews
Amazon Interview Questions
4.1
 • 4.9k Interviews
Capgemini Interview Questions
3.8
 • 4.7k Interviews
Tech Mahindra Interview Questions
3.6
 • 3.7k Interviews
HCLTech Interview Questions
3.6
 • 3.6k Interviews
Genpact Interview Questions
3.9
 • 2.9k Interviews
View all
Senior Design Engineer
7 salaries
unlock blur

₹3 L/yr - ₹5 L/yr

Design Engineer
5 salaries
unlock blur

₹2.8 L/yr - ₹3.6 L/yr

Mechanical Engg. Design
4 salaries
unlock blur

₹1.1 L/yr - ₹3 L/yr

Structural Design Engineer
4 salaries
unlock blur

₹5 L/yr - ₹7 L/yr

Junior Design Engineer
4 salaries
unlock blur

₹1.7 L/yr - ₹3 L/yr

Explore more salaries
Compare EQuad Engineering Services with

TCS

3.7
Compare

Infosys

3.7
Compare

Wipro

3.7
Compare

Tech Mahindra

3.6
Compare

Calculate your in-hand salary

Confused about how your in-hand salary is calculated? Enter your annual salary (CTC) and get your in-hand salary
Did you find this page helpful?
Yes No
write
Share an Interview