Filter interviews by
I applied via Walk-in and was interviewed before Feb 2022. There were 3 interview rounds.
Gear ratio is the ratio of the number of teeth on the driven gear to the number of teeth on the driving gear.
Count the number of teeth on the driving gear (gear attached to the motor) and the driven gear (gear attached to the load)
Divide the number of teeth on the driven gear by the number of teeth on the driving gear to get the gear ratio
For example, if the driving gear has 20 teeth and the driven gear has 40 teeth, t
Pulley provides mechanical advantage by reducing the amount of force required to lift a load.
A pulley system can have multiple pulleys to increase mechanical advantage
The mechanical advantage of a pulley is equal to the number of supporting ropes or cables
Pulleys can change the direction of the force applied to lift a load
Examples of pulleys include cranes, elevators, and flagpoles
Bernoulli's theorem states that potential energy decreases as kinetic energy increases in a fluid flow.
Bernoulli's theorem is based on the conservation of energy in a fluid flow.
Potential energy is the energy possessed by a fluid due to its position or elevation.
Kinetic energy is the energy possessed by a fluid due to its motion.
As the velocity of a fluid increases, its kinetic energy increases and its potential energy...
1st and 3rd angle projection symbols are used in engineering drawings to indicate the orientation of the object being depicted.
1st angle projection symbol is a triangle with the number '1' inside and is used in Europe and Asia.
3rd angle projection symbol is a triangle with the number '3' inside and is used in North America.
The symbol is usually placed in the lower right-hand corner of the drawing.
The symbol indicates t...
Relative humidity is the ratio of actual water vapor present in the air to the maximum amount of water vapor air can hold at a given temperature.
Absolute humidity is the actual amount of water vapor present in the air.
Saturation humidity is the maximum amount of water vapor air can hold at a given temperature.
Relative humidity and absolute humidity are measured in percentage while saturation humidity is measured in gra...
Draw orthographic projections of given isometric view.
Identify the isometric view and its orientation
Draw the front, top, and right views using the correct scale and proportions
Ensure that all lines are parallel and dimensions are accurate
Label each view with the appropriate dimensions and notes
Check for any errors or inconsistencies
Tolerances and fits are important in product development. Tolerances refer to the allowable variation in dimensions, while fits describe the degree of interference between mating parts.
Tolerances can be classified as either unilateral or bilateral
Fits can be classified as clearance, interference, or transition
Examples of fits include press fit, slip fit, and force fit
Surface finish symbols are used to indicate the type of surface finish required for a part.
Surface finish symbols are typically represented by a series of lines, circles, and triangles.
The symbols are used to indicate the type of surface finish required for a part, such as roughness, waviness, or lay.
Examples of surface finish symbols include Ra for roughness average, Rz for roughness depth, and W for waviness.
I am a Product Development Engineer with expertise in designing and developing new products.
I have a strong background in engineering and product design.
I am skilled in using CAD software to create 3D models and prototypes.
I have experience in conducting product testing and analysis to ensure quality and performance.
I am familiar with the product development lifecycle and have successfully brought several products to m...
I chose engineering because I have always been fascinated by how things work and wanted to be involved in creating innovative solutions.
Passion for problem-solving and curiosity about technology
Desire to make a positive impact on society through innovation
Enjoyment of hands-on work and building things
Inspiration from influential engineers or role models
Opportunity for continuous learning and growth
I am a good fit for your company because of my strong technical skills, experience in product development, and ability to work well in a team.
Strong technical skills: I have a solid foundation in engineering principles and have experience with various product development tools and technologies.
Experience in product development: I have successfully developed and launched several products in my previous roles, demonstrat...
I am open to discussing salary based on the responsibilities and market value for the role.
I am flexible and open to negotiation.
I would like to be compensated fairly for my skills and experience.
I am aware of the industry standards and would like to align my expectations accordingly.
I am more interested in the overall compensation package, including benefits and growth opportunities.
Top trending discussions
Designing a portable solar-powered water purification system
Utilizing solar panels to power the system
Incorporating filtration technology to purify water
Ensuring portability for easy transportation
I would analyze the components to determine their compatibility, functionality, and potential improvements for the project.
Analyze each component's specifications and requirements
Identify any potential compatibility issues
Evaluate the functionality of each component
Brainstorm potential improvements or optimizations
Consider cost and time constraints for implementing changes
I applied via Newspaper Ad and was interviewed before Feb 2021. There were 3 interview rounds.
Sheetmetal design details involve creating detailed drawings and specifications for sheetmetal components.
Understanding material properties and thicknesses for sheetmetal design
Creating accurate flat patterns for manufacturing
Considering bend allowances and tolerances
Utilizing CAD software for precise design
Incorporating features like flanges, ribs, and stiffeners for strength
Ensuring proper nesting of parts for effici
I applied via Referral and was interviewed before Jul 2022. There were 3 interview rounds.
I applied via Referral and was interviewed before Apr 2023. There was 1 interview round.
I applied via Company Website and was interviewed before Nov 2023. There were 2 interview rounds.
Detailed interview reg aerospace engineering
posted on 19 May 2023
I applied via Approached by Company and was interviewed before May 2022. There were 3 interview rounds.
Design software tool test evaluates the proficiency of a candidate in using design software tools.
The test may include tasks such as creating 3D models, drafting, and simulation
Candidates may be asked to use software tools such as AutoCAD, SolidWorks, or CATIA
The test may also assess the candidate's ability to troubleshoot and solve design problems
The test may be timed and may have multiple levels of difficulty
To make a 3D and 2D drawing for a wiring harness, I would use CAD software to create a detailed model and schematic.
Use CAD software to create a 3D model of the wiring harness, including all components and connections
Create a 2D schematic of the wiring harness, showing the layout and connections in a clear and organized manner
Ensure that all wiring and components are accurately represented in both the 3D model and 2D s...
posted on 11 Dec 2022
I applied via Naukri.com and was interviewed in Jun 2022. There were 4 interview rounds.
Casting engine components in CREO
Create a new part file in CREO
Design the component using the appropriate tools
Add draft angles and fillets to the design
Create a mold for the component
Use the mold to cast the component
I applied via Naukri.com and was interviewed in May 2021. There were 3 interview rounds.
Leg weld and throat weld are two types of welding symbols used to indicate the size and shape of a weld.
Leg weld refers to the length of the weld on one side of the joint, while throat weld refers to the minimum distance between the root and the face of the weld.
Leg weld is represented by a straight line perpendicular to the reference line, while throat weld is represented by a diagonal line.
For example, a leg weld sym...
Some of the top questions asked at the EQuad Engineering Services new Product Development Engineer interview -
based on 1 interview
Interview experience
Design Engineer
8
salaries
| ₹0 L/yr - ₹0 L/yr |
Senior Design Engineer
6
salaries
| ₹0 L/yr - ₹0 L/yr |
Mechanical Engg. Design
4
salaries
| ₹0 L/yr - ₹0 L/yr |
Structural Design Engineer
4
salaries
| ₹0 L/yr - ₹0 L/yr |
Piping Designer
4
salaries
| ₹0 L/yr - ₹0 L/yr |
TCS
Infosys
Wipro
Tech Mahindra