Dodsal Engineering & Construction Senior Civil Engineer Interview Questions and Answers

Q1. Formwork and steel productivity
Add your answer
Q2. Steel is 150 kg and Formwork is 175kg/sqmt. Per person per day.
Add your answer

Q1. 1.Describe about the projects handled, 2.different methods of dynamic analysis, 3.difference between modal combination methods, 4.describe about the toughest project you have done and why do you think i...read more
Ans. 
Answering questions related to projects, dynamic analysis, toughest project, pile foundations, and steel connection design.
• Projects handled: Mention the types of projects, their scale, and your role in them.

• Dynamic analysis methods: Explain different methods like time history analysis, response spectrum analysis, etc.

• Modal combination methods: Discuss different methods like CQC, SRSS, ABS, etc., and their differences.

• T...read more
Answered by AI
Add your answer

Q1. How long experience in relevant field.
Add your answer

Q1. About present company work profile and there you are working in field some technical queries ask.
Add your answer

Discussion about planing, sheduling, exicution, cordination

Q1. Strength and Quality work
Add your answer
Q2. Planing and avhieve target
Add your answer
Q3. Good Cordination
Add your answer

Q1. Iprovement vision technicaly
Add your answer

Q1. Development lengh, lap zone
Add your answer
Q2. Grades of steel, fe500D means,
Ans. 
Fe500D is a grade of steel used in construction, indicating its yield strength in megapascals.
• Fe500D is a type of steel used in construction with a yield strength of 500 megapascals.

• The 'Fe' stands for iron, while the '500' indicates the yield strength in megapascals.

• The 'D' in Fe500D signifies that it is a ductile steel grade.

• Fe500D steel is commonly used in reinforced concrete structures for its high strength and duc
Answered by AI
Add your answer
Q3. Concrete tests, nominal mix, design mix, de shuttering time, binding wire, BBS, shuttering measurements,
Add your answer
Q4. Cube test, slump value, flow test, material wastage allowable limit, productivity of workman etc
Add your answer

Q1. Tell me about yourself
Add your answer
Q2. Current salary, expected salary, notice period
Add your answer

Q1. What is the quantity of cement in m35 mix
Ans. 
The quantity of cement in M35 mix is typically around 420 kg/m3.
• The proportion of cement in M35 mix is usually 1:1.5:3 (cement:sand:aggregate)

• For 1 cubic meter of M35 mix, the cement required is approximately 420 kg

• The exact quantity may vary based on specific project requirements and mix design
Answered by AI
Add your answer
Q2. Use of tremie pipe
Ans. 
A tremie pipe is used in construction to place concrete underwater without washing out the cement content.
• Tremie pipe is a long pipe with a hopper at the top for pouring concrete underwater.

• It is used to prevent segregation of concrete and ensure proper placement in underwater structures.

• The pipe is slowly lifted as the concrete is poured to maintain a continuous flow and avoid voids.

• Tremie pipes are commonly used in t...read more
Answered by AI
Add your answer
Q3. Dia of tremie pipe
Ans. 
The dia of tremie pipe refers to the diameter of the pipe used for placing concrete underwater.
• The diameter of a tremie pipe is typically between 8 to 12 inches.

• A larger diameter tremie pipe is used for larger volume concrete placements.

• The diameter of the tremie pipe should be selected based on the specific project requirements and conditions.

• The diameter of the tremie pipe affects the rate at which concrete can be pl
Answered by AI
Add your answer
Q4. What is the cutoff level
Ans. 
The cutoff level refers to the minimum score or standard required to pass a test or qualify for a certain position.
• Cutoff level can vary depending on the specific test or criteria being used.

• It is often used in academic exams, job interviews, and selection processes.

• For example, a job may require a minimum cutoff level of 70% in a technical test to qualify for an interview.
Answered by AI
Add your answer

Q1. Tell about your previous company works.
Ans. I answered where I worked and working now. When you are telling them about the what type of structures you handled in that only they will ask questions.
Answered by Nandan A M
View 4 more answers
Q2. Why reinforcement is provided alternative in column?
Ans. 
Reinforcement is provided in column to increase its load-bearing capacity and prevent failure due to compression.
• Reinforcement helps to resist bending and shear forces in the column.

• It also helps to prevent buckling and reduces the risk of collapse.

• The amount and type of reinforcement used depends on the size and height of the column.

• For example, a taller and thinner column may require more reinforcement than a shorter
Answered by AI
View 4 more answers
Q3. To avoid the weak zone or shear failure. Mainly about reinforcement, concrete and quality control.
Add your answer
Q4. What is the slump range for boom pressure?
Ans. 
The slump range for boom pressure varies depending on the specific project requirements and concrete mix design.
• The slump range for boom pressure is typically determined by the concrete mix design and the desired workability of the concrete.

• It can range from low slump (around 25-50 mm) for high-strength concrete with low water-cement ratio to high slump (around 150-200 mm) for self-compacting concrete.

• The slump range m...read more
Answered by AI
View 4 more answers
Q5. 75mm to 125mm is the range for boom placer.
Add your answer
Q6. What is accountability and productivity?
Ans. 
Accountability is the responsibility to answer for one's actions, while productivity is the measure of efficiency and output in achieving goals.
• Accountability refers to being answerable for one's actions, decisions, and performance.

• It involves taking ownership of tasks and outcomes, and being transparent and responsible.

• Productivity is the measure of how efficiently and effectively work is completed.

• It focuses on achie...read more
Answered by AI
View 2 more answers
Q7. Do you have idea about safety and safety rules at L&T?
Ans. 
Yes, safety is a top priority at L&T and there are strict safety rules in place.
• L&T has a comprehensive safety policy that covers all aspects of their operations.

• All employees are required to undergo safety training and follow safety protocols.

• Regular safety audits are conducted to ensure compliance with safety rules.

• Personal protective equipment is provided to employees and its use is mandatory in hazardous areas.

• Safe...read more
Answered by AI
View 2 more answers
Q8. Yes Saftey procedure will almost same in every company but be prepared.
Add your answer
Q9. What are the measures you take for quality control?
Ans. 
We follow a comprehensive quality control plan that includes regular inspections, testing, and documentation.
• Develop and implement a quality control plan

• Conduct regular inspections and testing

• Document all quality control activities

• Ensure compliance with industry standards and regulations

• Provide training to staff on quality control procedures
Answered by AI
View 2 more answers
Q10. There is no need to run behind the quality, we just need to implement what we study at our syllabus and IS:Codes. Follow the procedure and quality follow us.
Add your answer

Q1. Foundation type
Add your answer
Q2. Rock anchorage details
Add your answer

Q1. Package kita loge
Add your answer