Filter interviews by
Clear (1)
I applied via Naukri.com and was interviewed before Apr 2019. There was 1 interview round.
There are three types of maintenance: corrective, preventive, and predictive. Each has its own advantages.
Corrective maintenance is fixing a problem after it occurs. Advantage: minimal planning required.
Preventive maintenance is scheduled maintenance to prevent problems. Advantage: reduces downtime and extends equipment life.
Predictive maintenance uses data to predict when maintenance is needed. Advantage: reduces down...
Points to consider during engine overhauling.
Disassembling the engine
Inspecting and measuring components
Replacing worn out parts
Cleaning and reassembling the engine
Testing the engine for proper functioning
Troubleshooting of engine and hydraulic system involves identifying and resolving issues related to their functioning.
Identify the symptoms of the problem
Check for any leaks or damages
Refer to the manual for troubleshooting steps
Use diagnostic tools to identify the root cause
Repair or replace the faulty components
Test the system to ensure proper functioning
Machines specification refers to the technical details and features of a machine.
Machines specification includes information about the machine's size, weight, power source, and capacity.
It also includes details about the machine's functions, such as speed, accuracy, and precision.
Machines specification may also include information about the materials used in the machine's construction and any safety features.
Examples o...
A lubrication system is a network of channels and pumps that supply oil or grease to moving parts of an engine or machine.
The system typically includes a reservoir for holding the lubricant.
A pump or series of pumps move the lubricant through channels or pipes to the parts that need it.
Filters may be included to remove contaminants from the lubricant.
Some systems use a pressure regulator to ensure the correct amount of...
There are three types of hydraulic pumps - gear pumps, vane pumps, and piston pumps.
Gear pumps use interlocking gears to pump fluid
Vane pumps use sliding vanes to pump fluid
Piston pumps use reciprocating pistons to pump fluid
Gear pumps are the most common type of hydraulic pump
Vane pumps are quieter and more efficient than gear pumps
Piston pumps are the most powerful type of hydraulic pump
Each type of pump has its own
Top trending discussions
I was interviewed in Mar 2023.
posted on 14 Oct 2023
I applied via Approached by Company and was interviewed before Oct 2022. There were 2 interview rounds.
Density of bentonite and prestressing formula are two separate topics in civil engineering.
Density of bentonite is typically around 2.0-2.5 g/cm^3.
Prestressing formula involves calculating the stress in a structure due to applied loads and prestressing forces.
Example of prestressing formula: Stress = Load / Area + Prestressing Force / Area
posted on 26 Jan 2025
CoS billing procedure involves categorizing and prioritizing traffic for billing purposes.
CoS (Class of Service) is a method used in networking to prioritize different types of traffic.
Billing procedures based on CoS involve assigning costs or charges to different classes of service.
Examples include charging more for high-priority traffic like VoIP calls compared to lower-priority data traffic.
I applied via Naukri.com and was interviewed in Jul 2021. There was 1 interview round.
Launching girder is a temporary structure used in construction to move and position heavy loads.
Launching girder is typically made of steel and consists of multiple sections that can be assembled and disassembled.
It is used in the construction of bridges, viaducts, and other structures to lift and move precast concrete segments into position.
The launching operation involves the step-by-step movement of the girder along...
posted on 30 Nov 2023
I was interviewed before Nov 2022.
posted on 30 Nov 2022
I applied via Job Portal
Bentonite is used as a drilling fluid to stabilize boreholes before pulsing.
Bentonite is mixed with water to form a slurry and pumped into the borehole.
The slurry fills the borehole and stabilizes the walls, preventing collapse.
After the bentonite has set, pulsing can be done without the risk of borehole collapse.
Pulsing is a technique used in geophysical exploration to measure the properties of the subsurface.
posted on 14 Jul 2017
I was interviewed before Jul 2016.
based on 1 review
Rating in categories
Senior Engineer
212
salaries
| ₹0 L/yr - ₹0 L/yr |
Assistant Manager
207
salaries
| ₹0 L/yr - ₹0 L/yr |
Asst Store
201
salaries
| ₹0 L/yr - ₹0 L/yr |
Store Executive
193
salaries
| ₹0 L/yr - ₹0 L/yr |
Structural Engineer
178
salaries
| ₹0 L/yr - ₹0 L/yr |
Ashoka Buildcon
IRB Infrastructure
Nagarjuna Construction Company
PNC Infratech