Filter interviews by
I applied via Referral and was interviewed in Aug 2020. There was 1 interview round.
Types of beams include simply supported, cantilever, continuous, and fixed beams.
Simply supported beams are supported at both ends and have no restraint at the supports.
Cantilever beams are supported at one end and have no support at the other end.
Continuous beams have more than two supports and are capable of transferring moments.
Fixed beams are supported at both ends and are capable of transferring moments and shear
The density of steel is approximately 7.85 grams per cubic centimeter.
Density of steel is a measure of how much mass is contained in a given volume of steel.
It is commonly expressed in grams per cubic centimeter (g/cm³) or kilograms per cubic meter (kg/m³).
The density of steel can vary depending on its composition and specific type.
For example, the density of carbon steel is around 7.85 g/cm³, while stainless steel has...
An estimate is a calculated approximation of the cost, time, or quantity of a project or task.
An estimate is used to determine the approximate cost, duration, or quantity of materials required for a project.
It is based on available information, historical data, and expert judgment.
Estimates are essential for budgeting, planning, and decision-making in construction projects.
Estimates can be prepared for various aspects ...
The largest scale in civil engineering is the macro scale, while the smallest scale is the micro scale.
The largest scale in civil engineering is used to study large structures and systems, such as bridges, highways, and dams.
The smallest scale in civil engineering is used to study the behavior of materials and components at a microscopic level.
Examples of the largest scale include designing a city's transportation netw...
Cement is a binding material used in construction to hold together different components of concrete.
Cement is a fine powder made from a mixture of limestone, clay, and other minerals.
It reacts with water to form a paste that hardens and binds the aggregates together.
It is a key ingredient in the production of concrete, mortar, and grout.
Different types of cement are available for specific construction purposes, such as...
Water cement ratio is the ratio of the weight of water to the weight of cement used in a concrete mix.
Water cement ratio determines the strength and workability of the concrete.
A lower water cement ratio results in stronger and more durable concrete.
The water cement ratio should be carefully controlled to achieve the desired properties of the concrete.
For example, a water cement ratio of 0.5 means that for every 1 kg o
The weight of steel can be calculated using the formula: weight = volume x density.
Calculate the volume of the steel component using appropriate geometric formulas.
Determine the density of the specific type of steel being used.
Multiply the volume by the density to obtain the weight of the steel.
For example, to calculate the weight of a steel beam, you would measure its dimensions and use the formula: weight = volume x
WMM stands for Wet Mix Macadam and WBM stands for Water Bound Macadam.
WMM is a type of road construction method where aggregates are mixed with water to form a base course.
WBM is a type of road construction method where aggregates are bound together with water and compacted to form a base course.
WMM is commonly used for highways and heavy traffic roads.
WBM is commonly used for low-traffic roads and rural areas.
WMM prov...
Top trending discussions
posted on 14 May 2022
I applied via Naukri.com and was interviewed before May 2021. There was 1 interview round.
I applied via Walk-in and was interviewed before Apr 2020. There were 5 interview rounds.
I was interviewed before Sep 2020.
Round duration - 140 minutes
Round difficulty - Medium
Test timing was at 2:00 pm , it was conducted in a college and the environment was good for the test. Camera was a primary part of test, so no suspicious activity.
Given two numbers in the form of two arrays where each element of the array represents a digit, calculate the sum of these two numbers and return this sum as an ar...
Given two numbers represented as arrays, calculate their sum and return the result as an array.
Iterate through the arrays from right to left, adding digits and carrying over if necessary
Handle cases where one array is longer than the other by considering the remaining digits
Ensure the final sum array does not have any leading zeros
Round duration - 20 minutes
Round difficulty - Easy
The round was conducted at around 12 p.m. I was called at the college location and then it was conducted. The interviewer was quite polite and frank.
Round duration - 8 minutes
Round difficulty - Easy
This round was conducted right after finishing and clearing the technical round at the same place and on the same day.
Tip 1 : Practice atleast 2-3 Coding problems daily so your logic building becomes stronger.
Tip 2 : Exercise problems based on OOPS concepts and others too.
Tip 3 : If you can have your own project built, then it's the major point and will act as a plus point.
Tip 1 : Your resume should be in standard form, short and simple will be more effective.
Tip 2 : Whatever you have learned, you need to mention it in your resume as that will be your primary source of selection and having project on your resume is important.
I applied via Recruitment Consultant and was interviewed before Sep 2020. There were 3 interview rounds.
I applied via Naukri.com and was interviewed in Jul 2020. There were 4 interview rounds.
I applied via Job Portal and was interviewed before Apr 2021. There was 1 interview round.
Solid principles are a set of design principles for writing maintainable and scalable code in C#.
Single Responsibility Principle (SRP) - a class should have only one reason to change
Open/Closed Principle (OCP) - a class should be open for extension but closed for modification
Liskov Substitution Principle (LSP) - derived classes should be substitutable for their base classes
Interface Segregation Principle (ISP) - client...
I applied via Campus Placement and was interviewed before May 2020. There were 4 interview rounds.
I applied via Naukri.com and was interviewed before Apr 2020. There were 5 interview rounds.
I applied via Campus Placement and was interviewed before Jan 2020. There were 4 interview rounds.
based on 3 reviews
Rating in categories
Civil Site Engineer
3
salaries
| ₹0 L/yr - ₹0 L/yr |
TCS
Accenture
Wipro
Cognizant