Upload Button Icon Add office photos

DENSO

Compare button icon Compare button icon Compare

Filter interviews by

DENSO Interview Questions, Process, and Tips

Updated 11 Feb 2025

Top DENSO Interview Questions and Answers

View all 55 questions

DENSO Interview Experiences

Popular Designations

72 interviews found

I applied via Job Fair and was interviewed in Jan 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(1 Question)

  • Q1. Tell me about yourself.
Round 3 - Group Discussion 
Pro Tip by AmbitionBox:
Don’t treat group discussions as an argument. Group discussion is about reaching a meaningful conclusion.
View all tips

Interview Preparation Tips

Interview preparation tips for other job seekers - Good experience Nd knowledge I hard work Nd good team work

Production Supervisor Interview Questions asked at other Companies

Q1. What is the responsibility of production supervisor?
View answer (45)

I applied via Job Portal

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - Aptitude Test 

Interview Preparation Tips

Interview preparation tips for other job seekers - Basic knowledge must.
Body language simple

Process Associate Interview Questions asked at other Companies

Q1. How will you explain a red colour (or any colour) to a person who is blind since his or her birth?
View answer (19)

Interview Questionnaire 

3 Questions

  • Q1. Mentally question and as work for called
  • Q2. How you are come today in danso
  • Ans. 

    I came to danso today by car.

    • I drove to danso today.

    • I used my car as the mode of transportation.

    • I arrived in danso today by driving.

  • Answered by AI
  • Q3. How much speed did you drive if coming by personel vehicle
  • Ans. 

    I always drive within the speed limit to ensure safety and compliance with traffic laws.

    • I always follow the speed limit and drive safely

    • I prioritize safety and compliance with traffic laws over speed

    • I never exceed the speed limit while driving

  • Answered by AI

Assistant Engineer Interview Questions asked at other Companies

Q1. Why do we take only 1 set of cube sample at a casting of concrete of 5 or less than 5 Meter cube.
View answer (9)

HR Executive Interview Questions & Answers

user image Anonymous

posted on 29 Nov 2021

I applied via Recruitment Consultant and was interviewed in Oct 2021. There was 1 interview round.

Interview Questionnaire 

2 Questions

  • Q1. Why do you want to change your job?
  • Q2. Why we should hire you for the given position?

Interview Preparation Tips

Interview preparation tips for other job seekers - In an interview always be firm with your answers and try to elaborate in very precise manner and always focus on your listening rather than speaking

HR Executive Interview Questions asked at other Companies

Q1. What do you know about Labor Law
View answer (6)

DENSO interview questions for popular designations

 Assistant Engineer

 (6)

 Production Engineer

 (5)

 Assistant Manager

 (4)

 Diploma Trainee Engineer

 (3)

 Quality Engineer

 (3)

 Engineer

 (2)

 HR Executive

 (2)

 Project Manager

 (2)

I applied via Recruitment Consultant and was interviewed in Apr 2021. There were 6 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Written test +Technical Round related your work experience

Interview Preparation Tips

Interview preparation tips for other job seekers - Be positive and full of confidence during interview time

Assistant Engineer Interview Questions asked at other Companies

Q1. Why do we take only 1 set of cube sample at a casting of concrete of 5 or less than 5 Meter cube.
View answer (9)

Get interview-ready with Top DENSO Interview Questions

Round 1 - Aptitude Test 

Interview Preparation Tips

Interview preparation tips for other job seekers - Good skills and quality mention

Quality Assurance and Testing Interview Questions asked at other Companies

Q1. Suppose you are testing an application and you find a bug and now you assigned that bug to a developer but he revert by saying he is not getting this bug in his system. What will you do ?
View answer (4)

Interview Preparation Tips

Topics to prepare for DENSO Electrician Electrical Supervisor interview:
  • Present Job
Interview preparation tips for other job seekers - Sar I'm Reenu
Iti pass
Vill+post.jarouda.muzaffaranagar

I applied via Approached by Company and was interviewed in Sep 2021. There was 1 interview round.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all tips

Interview Preparation Tips

Interview preparation tips for other job seekers - Good quality assurance and Repair

Quality Assurance and Testing Interview Questions asked at other Companies

Q1. Suppose you are testing an application and you find a bug and now you assigned that bug to a developer but he revert by saying he is not getting this bug in his system. What will you do ?
View answer (4)

I applied via Recruitment Consultant and was interviewed in Oct 2020. There were 3 interview rounds.

Interview Questionnaire 

4 Questions

  • Q1. GD&T symbols & explanation
  • Ans. 

    GD&T symbols are used to specify geometric tolerances on engineering drawings.

    • GD&T stands for Geometric Dimensioning and Tolerancing

    • It is a system of symbols used to specify the allowable variation in form and size of features on a part

    • Examples of GD&T symbols include: flatness, perpendicularity, concentricity, and position

    • GD&T is important for ensuring parts are manufactured to the correct specifications and fit toget

  • Answered by AI
  • Q2. How to check true position on CMM
  • Ans. 

    True position on CMM can be checked using a combination of software and hardware tools.

    • Use a calibrated probe to measure the feature location

    • Compare the measured location with the nominal location

    • Calculate the deviation and compare it with the tolerance

    • Use software tools like GD&T to analyze the results

    • Ensure the CMM is calibrated and the probe is in good condition

  • Answered by AI
  • Q3. What is FMEA
  • Ans. 

    FMEA stands for Failure Mode and Effects Analysis. It is a systematic approach to identify and prevent potential failures in a process or product.

    • FMEA is used to identify potential failures in a process or product and their effects on the system.

    • It involves analyzing the likelihood of failure, severity of the consequences, and the ability to detect the failure before it occurs.

    • FMEA is commonly used in industries such a...

  • Answered by AI
  • Q4. How to do instrument selection
  • Ans. 

    Instrument selection involves identifying the appropriate tools and equipment for a specific task or process.

    • Identify the purpose of the instrument

    • Consider the accuracy and precision required

    • Evaluate the cost and availability

    • Ensure the instrument is compatible with other equipment

    • Consider the maintenance and calibration requirements

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Always have good knowledge for the things that you have added in your resume. Do not put anything that you don't know about.

Skills evaluated in this interview

Top DENSO Quality Engineer Interview Questions and Answers

Q1. What is quality?why you do Mechanical Engineering?
View answer (2)

Quality Engineer Interview Questions asked at other Companies

Q1. What is MSA and addition of msa version, type of msa ,what different between variable data and attibute data .why difine flase and miss rate calculate by msa .
View answer (8)

Engineer Interview Questions & Answers

user image Anonymous

posted on 7 Sep 2021

I applied via Naukri.com and was interviewed before Sep 2020. There were 3 interview rounds.

Interview Questionnaire 

7 Questions

  • Q1. What is line balance
  • Ans. 

    Line balance refers to the equal distribution of work among different stations in a production line.

    • Line balance ensures that each station in a production line has a similar workload.

    • It helps in optimizing the efficiency and productivity of the production process.

    • Line balancing techniques involve analyzing the tasks, cycle times, and capacities of each station to achieve optimal balance.

    • An example of line balance is wh...

  • Answered by AI
  • Q2. What is lead time
  • Ans. 

    Lead time is the time it takes to complete a process from start to finish.

    • Lead time includes all the steps involved in a process, from planning to delivery.

    • It is an important metric for businesses to measure and improve efficiency.

    • Lead time can vary depending on the complexity of the process and the resources available.

    • For example, the lead time for manufacturing a car can be several months, while the lead time for del

  • Answered by AI
  • Q3. How to decide torque
  • Ans. 

    Torque is decided based on the required force and the distance from the axis of rotation.

    • Determine the required force for the task

    • Calculate the distance from the axis of rotation

    • Use the formula T = F x d to calculate torque

    • Consider any external factors that may affect torque requirements

    • Choose a motor or engine with sufficient torque output

  • Answered by AI
  • Q4. How to work with union
  • Ans. 

    Working with unions requires clear communication, respect, and a willingness to negotiate.

    • Establish open lines of communication with union representatives

    • Respect the collective bargaining agreement and union rules

    • Negotiate in good faith to find mutually beneficial solutions

    • Be prepared to compromise and find creative solutions

    • Stay informed about labor laws and regulations

    • Address any grievances or disputes promptly and f

  • Answered by AI
  • Q5. How to improve shopfloor
  • Ans. 

    Improving shopfloor requires optimizing processes, training employees, and utilizing technology.

    • Analyze current processes and identify areas for improvement

    • Invest in employee training and development

    • Implement technology such as automation and data analytics

    • Regularly review and adjust processes to ensure efficiency

    • Encourage employee feedback and suggestions

    • Maintain a clean and organized workspace

  • Answered by AI
  • Q6. What is 5s in the plant
  • Ans. 

    5S is a workplace organization method that uses a set of principles to create and maintain an organized, clean, and efficient work environment.

    • Sort - separate necessary items from unnecessary ones

    • Set in order - arrange necessary items in a logical manner

    • Shine - clean the work area and equipment

    • Standardize - establish procedures for maintaining the first three S's

    • Sustain - ensure that the first four S's are followed con...

  • Answered by AI
  • Q7. What is your goal in life

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident and be on time

Top DENSO Engineer Interview Questions and Answers

Q1. What is 5s in the plant
View answer (2)

Engineer Interview Questions asked at other Companies

Q1. ❖ If a team member is unable to carry out his work, he is doing it repetitively, how would you handle it?, would you like to work only on lifing of components, or would you be ready to shift to other departments?
View answer (7)

DENSO Interview FAQs

How many rounds are there in DENSO interview?
DENSO interview process usually has 2-3 rounds. The most common rounds in the DENSO interview process are Technical, HR and Resume Shortlist.
How to prepare for DENSO interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at DENSO. The most common topics and skills that interviewers at DENSO expect are Human Resource Management, Performance Management, Analytical Chemistry, CP and Counselling.
What are the top questions asked in DENSO interview?

Some of the top questions asked at the DENSO interview -

  1. AC is an electrical appliance but sold in Electronics shop why ...read more
  2. How can you operate 4 different light bulbs under different trigger conditi...read more
  3. How can you make a transistor if semiconductor material is given to you (by jap...read more
How long is the DENSO interview process?

The duration of DENSO interview process can vary, but typically it takes about less than 2 weeks to complete.

Tell us how to improve this page.

DENSO Interview Process

based on 68 interviews

Interview experience

3.9
  
Good
View more

Interview Questions from Similar Companies

Siemens Interview Questions
4.1
 • 430 Interviews
Bosch Interview Questions
4.2
 • 334 Interviews
ABB Interview Questions
4.1
 • 231 Interviews
Hitachi Interview Questions
4.0
 • 82 Interviews
Panasonic Interview Questions
4.1
 • 47 Interviews
View all

DENSO Reviews and Ratings

based on 1k reviews

4.1/5

Rating in categories

3.9

Skill development

3.9

Work-life balance

4.1

Salary

4.2

Job security

4.1

Company culture

3.6

Promotions

3.8

Work satisfaction

Explore 1k Reviews and Ratings
Assistant Manager
264 salaries
unlock blur

₹8 L/yr - ₹17.5 L/yr

Deputy Manager
185 salaries
unlock blur

₹11 L/yr - ₹23 L/yr

Engineer
181 salaries
unlock blur

₹3.4 L/yr - ₹9 L/yr

Senior Engineer
145 salaries
unlock blur

₹6 L/yr - ₹13.5 L/yr

Production Engineer
89 salaries
unlock blur

₹1.8 L/yr - ₹9 L/yr

Explore more salaries
Compare DENSO with

Bosch

4.2
Compare

Mitsubishi Electric

4.3
Compare

Hitachi

4.0
Compare

Siemens

4.1
Compare
Did you find this page helpful?
Yes No
write
Share an Interview