Upload Button Icon Add office photos

Filter interviews by

Cyient DLM Design Engineer Interview Questions and Answers

Updated 30 Oct 2023

Cyient DLM Design Engineer Interview Experiences

1 interview found

Interview experience
4
Good
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed before Oct 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Double-check your resume for any spelling mistakes. The recruiter may consider spelling mistakes as careless behavior or poor communication skills.
View all tips
Round 2 - Technical 

(5 Questions)

  • Q1. What is your experience in DCS?
  • Q2. How many years of experience in DCS
  • Q3. What is Profibus ?
  • Ans. 

    Profibus is a fieldbus communication system used in industrial automation.

    • Profibus stands for Process Field Bus.

    • It is a standard for fieldbus communication in automation technology.

    • Profibus allows communication between field devices and control systems.

    • There are different types of Profibus networks, such as Profibus DP (Decentralized Peripherals) and Profibus PA (Process Automation).

  • Answered by AI
  • Q4. What is modbus??
  • Ans. 

    Modbus is a communication protocol commonly used in industrial automation for connecting electronic devices.

    • Modbus is used for transmitting data between devices over serial communication lines.

    • It is a master-slave protocol, where one device (master) initiates communication with one or more devices (slaves).

    • Modbus RTU and Modbus TCP/IP are two common variants of the protocol.

    • It is often used in industries such as manufa...

  • Answered by AI
  • Q5. What is OPC communication?
  • Ans. 

    OPC communication stands for OLE for Process Control communication, a standard protocol for industrial automation.

    • OPC communication is a standard protocol used in industrial automation to facilitate communication between different devices and software applications.

    • It allows for seamless data exchange between various systems, such as PLCs, HMIs, and SCADA systems.

    • OPC communication can be implemented using different vers...

  • Answered by AI

Skills evaluated in this interview

Interview questions from similar companies

Interview Preparation Tips

Round: Resume Shortlist
Experience: CRITERIA:6.5+ CGPANO BACKLOGS
Tips: TRY TO WORK HARD IN THE EARLIER SEMESTERS TO BE ELIGIBLE FOR MOST OF THE COMPANIES.

Round: Test
Experience: 30 TECHNICAL QUESTIONS, PURELY BRANCH SPECIFIC, EASY AND BASIC CONCEPTS WERE ASKED.30 APTITUDE AND ENGLISH QUESTIONS, VERY EASY
Tips: PREPARE TECHNICAL PART WELLPRACTICE APTITUDE AND ENGLISH FROM www.indiabix.comVERY HELPFUL WEBSITE
Duration: 60 minutes
Total Questions: 60

Round: HR Interview
Experience: GENERAL QUESTIONS WERE ASKED:ABOUT MYSELFFAMILY BACKGROUNDSCHOOLING AND ACADEMIC ACHIEVEMENTSABOUT JOINING TCE
Tips: DON'T MANIPULATE THE TRUTH.ANSWER CLEARLY AND CONFIDENTLY.

Round: Technical Interview
Experience: TECHNICAL QUESTIONS RELATED TO ELECTIVE SUBJECTS WERE ASKED.ALSO DESIGN STEPS OF VARIOUS STRUCTURAL ELEMENTS WERE ASKED.
Tips: BE PREPARED. SAY "DON'T KNOW THE ANSWER" INSTEAD OF SPEAKING NONSENSE. ANSWER ONLY WHAT IS ASKED. EXTRA INFO GIVEN BY YOU CAN GET YOU IN UNWANTED TROUBLE!! :P

General Tips: BEST OF LUCK.
Skill Tips: MAIN FOCUS ON THE WAY YOU COMMUNICATE WITH THE INTERVIEWERS IN ENGLISH!!
Skills: COMMUNICATION SKILLS
College Name: NIT SURAT
Motivation: GOOD REPUTATION. IT WAS EXACTLY MATCHING TO THE JOB PROFILE I ASPIRED FOR.TATA GROUP IS A BIG BRAND IN INDIA AND CAN LEAD TO MANY FUTURE BENEFITS IF YOU SERVE THEM FOR CONSIDERABLE AMOUNT OF TIME.
Funny Moments: THEY ASKED ME: "ANY SUGGESTION FOR IMPROVING OUR SELECTION PROCEDURE?"I ANSWERED: "YOU SHOULD CHANGE IT. TEST SHOULD BE ONLINE RATHER THAN BEING OFFLINE i.e. PEN AND PAPER."THEY WERE IMPRESSED AND APPRECIATED IT. :P

I applied via Campus Placement and was interviewed before Apr 2020. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. About the basics of c, c++ and java, also asked to explain the project that I developed.

Interview Preparation Tips

Interview preparation tips for other job seekers - Be bold and transparent. Explain your reasons and issues if any they are under standable.

I applied via Campus Placement and was interviewed before Feb 2021. There were 2 interview rounds.

Round 1 - Technical 

(2 Questions)

  • Q1. About college projects
  • Q2. Technicals related to it
Round 2 - HR 

(4 Questions)

  • Q1. What is your family background?
  • Q2. Where do you see yourself in 5 years?
  • Q3. What are your strengths and weaknesses?
  • Q4. Tell me about yourself.

Interview Preparation Tips

Topics to prepare for TCS Design Engineer interview:
  • Design considerations
  • Tools
Interview preparation tips for other job seekers - Go through your resume. See the profile that you have applied for. Explain everything you have learnt related to that profile and keep examples for most of it . Do some research on the company as well but not necessary.

I applied via Naukri.com and was interviewed before Jan 2021. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. C++, Linux.

Interview Preparation Tips

Interview preparation tips for other job seekers - Concept and body language. How you are confident while answering.

I applied via Recruitment Consultant and was interviewed in May 2021. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. All questions related to Digital and networks and they asked core java question like functional interface uses and why do we need it and difference with interface

Interview Preparation Tips

Interview preparation tips for other job seekers - Interview was quite good

I applied via Naukri.com and was interviewed in Aug 2020. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Past experience and communication skills

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident

I applied via Naukri.com and was interviewed before Oct 2021. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. What is AD dns dhcp?
  • Ans. 

    AD DNS DHCP are Microsoft technologies used for network management and authentication.

    • Active Directory (AD) is a directory service used for authentication and authorization of users and computers in a network.

    • Domain Name System (DNS) is used for name resolution of network resources.

    • Dynamic Host Configuration Protocol (DHCP) is used for automatic IP address assignment to network devices.

    • AD, DNS, and DHCP are often used ...

  • Answered by AI
  • Q2. What is IaaS SaaS PaaS?
  • Ans. 

    IaaS, SaaS, and PaaS are cloud computing models that provide different levels of infrastructure, software, and platform services.

    • IaaS (Infrastructure as a Service) provides virtualized computing resources over the internet, such as servers, storage, and networking.

    • SaaS (Software as a Service) delivers software applications over the internet, eliminating the need for local installation and maintenance.

    • PaaS (Platform as ...

  • Answered by AI
Round 3 - Aptitude Test 

General questions for 1 hors online exams

Interview Preparation Tips

Interview preparation tips for other job seekers - be confident in your role and select which role you want to work

Skills evaluated in this interview

I applied via Naukri.com and was interviewed before Jul 2020. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. Coming to AEM,Interviewer has covered all the topics.

Interview Preparation Tips

Interview preparation tips for other job seekers - Pls don't join in TechMahindra.Especially for AEM Folks.Because there are no projects at all.They force you to learn and work in other domain.Then your AEM knowledge will vanish.Worst Company.

Interview Questionnaire 

6 Questions

  • Q1. Explain abstract factory design pattern ?
  • Ans. 

    Abstract Factory is a creational design pattern that provides an interface for creating families of related objects.

    • Abstract Factory is used when we need to create families of related objects without specifying their concrete classes.

    • It provides an interface for creating objects of related classes without specifying their concrete classes.

    • It encapsulates a group of factories that have a common theme.

    • It promotes loose c...

  • Answered by AI
  • Q2. How do you do range based map iteration
  • Ans. 

    Range based map iteration can be done using a for-each loop or iterators.

    • Use a for-each loop to iterate over the map elements.

    • Alternatively, use iterators to traverse the map.

    • The range-based for loop is preferred for its simplicity and readability.

    • Example: for(auto const& [key, value] : myMap) { //do something with key and value }

  • Answered by AI
  • Q3. What are detached and joined threads
  • Ans. 

    Detached threads are independent threads that run separately from the main thread. Joined threads are threads that wait for the main thread to finish.

    • Detached threads are created using pthread_detach() function

    • Joined threads are created using pthread_join() function

    • Detached threads do not need to be explicitly terminated

    • Joined threads must be explicitly terminated using pthread_exit() or return statement

    • Detached thread...

  • Answered by AI
  • Q4. What are static code analysis tools
  • Ans. 

    Static code analysis tools are software programs that analyze source code to find potential issues and improve code quality.

    • Static code analysis tools scan code without executing it

    • They can detect issues such as security vulnerabilities, coding errors, and performance problems

    • Examples of static code analysis tools include SonarQube, ESLint, and Checkstyle

  • Answered by AI
  • Q5. Command to list currently running threads in linux
  • Ans. 

    Command to list currently running threads in linux

    • Use the 'ps' command with the 'H' option to display threads in a hierarchy

    • Use the 'top' command to display threads in real-time

    • Use the 'htop' command for an interactive display of threads

  • Answered by AI
  • Q6. Can we perform arithmetic operation on Unique pointer
  • Ans. 

    No, arithmetic operations cannot be performed on unique pointers.

    • Unique pointers are used to manage the lifetime of dynamically allocated objects.

    • They cannot be copied or assigned, only moved.

    • Arithmetic operations are not defined for pointers, including unique pointers.

  • Answered by AI

Skills evaluated in this interview

Cyient DLM Interview FAQs

How many rounds are there in Cyient DLM Design Engineer interview?
Cyient DLM interview process usually has 2 rounds. The most common rounds in the Cyient DLM interview process are Resume Shortlist and Technical.
What are the top questions asked in Cyient DLM Design Engineer interview?

Some of the top questions asked at the Cyient DLM Design Engineer interview -

  1. What is OPC communicati...read more
  2. What is Profibu...read more
  3. What is modbu...read more

Tell us how to improve this page.

Cyient DLM Design Engineer Interview Process

based on 1 interview

Interview experience

4
  
Good
View more
Assistant Manager
23 salaries
unlock blur

₹6.8 L/yr - ₹15 L/yr

Technician
21 salaries
unlock blur

₹1.2 L/yr - ₹3 L/yr

Operator
16 salaries
unlock blur

₹1.4 L/yr - ₹3.1 L/yr

Quality Engineer
15 salaries
unlock blur

₹2.8 L/yr - ₹4.6 L/yr

Senior Executive
13 salaries
unlock blur

₹4.5 L/yr - ₹9.5 L/yr

Explore more salaries
Compare Cyient DLM with

TCS

3.7
Compare

Accenture

3.8
Compare

Wipro

3.7
Compare

Cognizant

3.7
Compare
Did you find this page helpful?
Yes No
write
Share an Interview