i
Filter interviews by
Clear (1)
I am the work assignment peace work
Ceiling fan windings and mixie motors are commonly changed and repaired by electronic technicians.
Ceiling fan windings may need to be replaced if they are burnt out or damaged.
Mixie motors may need to be replaced if they are not functioning properly.
Electronic technicians have the skills and knowledge to diagnose and repair issues with ceiling fan windings and mixie motors.
Top trending discussions
posted on 29 Nov 2023
A single phase line is an electrical circuit that carries alternating current (AC) power at a voltage and frequency suitable for domestic and small commercial purposes.
Single phase line has two conductors - one live/hot wire and one neutral wire.
Commonly used in residential buildings for powering lighting, appliances, and other electrical devices.
Voltage typically ranges from 100-240 volts, with a frequency of 50-60 Hz...
I applied via Recruitment Consultant and was interviewed in Nov 2017. There were 8 interview rounds.
I applied via Referral and was interviewed in Mar 2022. There were 2 interview rounds.
The neutral wire and grounding serve different purposes in electrical systems.
The neutral wire carries current back to the source in a balanced electrical circuit.
Grounding provides a path for electrical faults to safely discharge into the ground.
Neutral wire is typically connected to the center tap of a transformer, while grounding is connected to the earth.
Neutral wire is part of the normal current-carrying circuit, ...
Wire current capacity can be calculated using the wire gauge and the maximum current rating of the wire.
Determine the wire gauge
Refer to the maximum current rating chart for the wire gauge
Consider the length of the wire and the ambient temperature
Use the appropriate formula to calculate the current capacity
The electrical power in my area is provided by XYZ Power Company.
XYZ Power Company is the main provider of electrical power in my area.
They have been providing reliable power supply for many years.
Their customer service is also very responsive and helpful.
Other smaller companies also provide power in some areas, but XYZ is the most prominent one.
To troubleshoot a transformer, check for physical damage, measure voltage and current, and test insulation resistance.
Inspect for any physical damage or loose connections
Measure the voltage and current on both the primary and secondary sides
Test the insulation resistance using a megohmmeter
Check for any abnormal noises or overheating
Verify that the transformer is properly grounded
Compare the measured values with the ma
posted on 13 Jan 2025
I applied via Campus Placement and was interviewed in Jul 2024. There were 2 interview rounds.
The first round was a gamified aptitude test, and shortlisting was conducted based on sectional cutoffs. Female candidates were given higher preference.
Circuit breakers are devices that automatically stop the flow of electricity when a fault is detected, while relays are switches that open or close circuits based on electrical signals.
Circuit breakers are designed to protect electrical circuits from damage caused by overcurrent or short circuits.
They work by detecting abnormal current flow and quickly interrupting the circuit to prevent damage.
Relays are electromechan...
A Buchholz relay is a protective device used in oil-filled transformers to detect and prevent internal faults.
Detects faults such as insulation breakdown or arcing within the transformer
Consists of a float switch connected to an alarm or trip circuit
When gas or oil accumulates due to a fault, the float rises and triggers the alarm or trip signal
Helps prevent major damage to the transformer by isolating it from the powe
Induction motor operates on the principle of electromagnetic induction. Mutual inductance is the measure of the coupling between two coils.
Induction motor works on the principle of electromagnetic induction where a rotating magnetic field is produced to induce current in the rotor, causing it to rotate.
Mutual inductance is the measure of the coupling between two coils, indicating how much of the magnetic field produced...
I applied via Company Website and was interviewed in Jul 2023. There was 1 interview round.
An encoder is a device or circuit that converts information from one format to another.
An encoder can be a hardware device or a software program.
In the context of electrical engineering, an encoder is often used to convert analog signals into digital signals.
Encoders are commonly used in communication systems, robotics, and industrial automation.
Examples of encoders include rotary encoders used in motor control and opt
posted on 11 May 2022
I applied via Approached by Company and was interviewed before May 2021. There were 3 interview rounds.
Basic Mathematics
posted on 30 Apr 2023
I applied via AmbitionBox and was interviewed in Mar 2023. There were 4 interview rounds.
Sims opration .customer,meeting issue solution
100% assigment completed
posted on 13 Jul 2022
I applied via Company Website and was interviewed in Jun 2022. There was 1 interview round.
Hardness of materials can be found in UTM by applying loads.
Universal Testing Machine (UTM) is used to measure the hardness of materials.
The load is applied to the material and the depth of the indentation is measured.
The hardness value is calculated using the load and the area of the indentation.
Different types of tests can be performed to measure hardness, such as Brinell, Vickers, and Rockwell tests.
I applied via Naukri.com and was interviewed before Nov 2021. There were 4 interview rounds.
Calibration is the process of adjusting and verifying the accuracy of an instrument or equipment.
Calibration ensures that the instrument is providing accurate and reliable measurements.
If an instrument is found to be out of calibration, it should be taken out of service immediately.
The instrument should be sent to a qualified calibration laboratory for adjustment and recalibration.
During the calibration process, the in...
Electronics card protection refers to measures taken to safeguard electronic components from damage or malfunction.
Electronics card protection involves protecting electronic components from environmental factors such as moisture, dust, and temperature fluctuations.
This can be achieved through the use of protective coatings, enclosures, and proper ventilation.
Protection can also involve measures to prevent damage from e...
If I have to perform testing on site on a pole, I will follow a systematic approach to ensure safety and accuracy.
Assess the testing requirements and gather necessary equipment
Ensure personal safety by wearing appropriate protective gear
Climb the pole using proper climbing techniques and safety measures
Perform the required testing procedures accurately
Document the test results and any observations
Report any issues or a...
I am seeking new challenges and opportunities for growth in my career.
Looking for a more challenging role
Seeking opportunities for career advancement
Want to broaden my skill set
Desire to work in a different industry or company culture
Need for better work-life balance
Unsatisfied with current job environment or management
My ambition with your company is to grow and advance my career while contributing to the success of the organization.
I am eager to take on more responsibilities and challenges as an Assistant Manager.
I want to develop my leadership skills and become a valuable asset to the team.
I am committed to achieving the company's goals and objectives.
I aim to build strong relationships with colleagues and foster a positive work e...
Some of the top questions asked at the Crompton Greaves Consumer Electricals Electronic Technician interview -
based on 1 interview
Interview experience
Territory Sales Manager
444
salaries
| ₹0 L/yr - ₹0 L/yr |
Territory Manager
259
salaries
| ₹0 L/yr - ₹0 L/yr |
Area Sales Manager
214
salaries
| ₹0 L/yr - ₹0 L/yr |
Assistant Manager
157
salaries
| ₹0 L/yr - ₹0 L/yr |
Associate Manager
112
salaries
| ₹0 L/yr - ₹0 L/yr |
Havells
Bajaj Electricals
Voltas
Siemens