Filter interviews by
I applied via campus placement at Gandhi Institute for Technology Advancement, Bhuvaneshwar and was interviewed in Feb 2024. There was 1 interview round.
Leveling work by total station involves setting up the instrument, measuring points, recording data, and adjusting heights.
Set up the total station at a known point with a clear line of sight to the area to be leveled.
Measure points on the ground by aiming the total station at a prism or reflector placed on a staff.
Record the data collected, including the horizontal and vertical angles, distances, and elevations.
Adjust...
To find out the hi given rl 100, subtract rl from the known elevation benchmark
Subtract the known reduced level (rl) from the elevation benchmark to find the height (hi)
For example, if the elevation benchmark is 200 and the rl is 100, then the height (hi) would be 100 units
Top trending discussions
I applied via Company Website and was interviewed in Sep 2022. There were 2 interview rounds.
Curing is the process of maintaining moisture and temperature conditions for freshly placed concrete to promote its hydration and strength gain.
Curing is essential for the strength and durability of concrete.
It involves keeping the concrete moist and at a proper temperature for a specific period of time.
Curing can be done using various methods such as water curing, membrane curing, and steam curing.
The duration of curi...
The strength of cement depends on its grade and type.
The strength of cement is measured in terms of compressive strength.
The grade of cement determines its strength. Higher the grade, higher the strength.
Type of cement also affects its strength. For example, Portland cement has higher strength than lime cement.
The strength of cement is also influenced by factors such as curing time, temperature, and humidity.
The interior work of the last project done for Reliance Company involved designing and implementing modern and functional office spaces.
Designed open-concept workspaces to promote collaboration among employees
Installed energy-efficient lighting and HVAC systems to reduce operational costs
Used sustainable materials for furniture and finishes to align with company's green initiatives
I applied via Company Website and was interviewed in Sep 2022. There were 2 interview rounds.
Curing is the process of maintaining moisture and temperature conditions for freshly placed concrete to promote its hydration and strength gain.
Curing is essential for the strength and durability of concrete.
It involves keeping the concrete moist and at a proper temperature for a specific period of time.
Curing can be done using various methods such as water curing, membrane curing, and steam curing.
The duration of curi...
The strength of cement depends on its grade and type.
The strength of cement is measured in terms of compressive strength.
The grade of cement determines its strength. Higher the grade, higher the strength.
Type of cement also affects its strength. For example, Portland cement has higher strength than lime cement.
The strength of cement is also influenced by factors such as curing time, temperature, and humidity.
I applied via Campus Placement and was interviewed in May 2022. There were 2 interview rounds.
The block shear strength in the bolt connection shown in fig 28 is dlong.
Block shear strength refers to the maximum load a bolt connection can withstand before failure.
The term 'dlong' likely refers to a specific value or calculation related to the block shear strength.
To determine the block shear strength, factors such as the material properties, bolt size, and connection design must be considered.
Examples of factors ...
The bearing capacity of a bolt is a measure of its ability to withstand loads without failure.
Bearing capacity is influenced by factors such as bolt diameter, material strength, and surface conditions.
The bearing capacity can be calculated using various formulas, such as the Euler's formula or the Goodman's formula.
For example, the bearing capacity of a bolt can be determined using the formula: P = A * σ * F
Where P is ...
The size of a rivet is determined by its intended use and the structural requirements of the application.
The size of a rivet is determined by the load it needs to bear.
The size of a rivet is also influenced by the thickness and material of the materials being joined.
Factors such as shear strength, tensile strength, and grip range are considered when determining the size of a rivet.
For example, in heavy structural appli...
Interview experience
Assistant Manager
4
salaries
| ₹3.6 L/yr - ₹4 L/yr |
Accountant
4
salaries
| ₹3.6 L/yr - ₹5.2 L/yr |
Project Manager
3
salaries
| ₹2.5 L/yr - ₹5.8 L/yr |
MIS Executive
3
salaries
| ₹3.5 L/yr - ₹5.5 L/yr |
General Manager Finance & Accounts
3
salaries
| ₹18 L/yr - ₹18 L/yr |
United Breweries
Radico Khaitan
Pernod Ricard
Diageo