Upload Button Icon Add office photos
Engaged Employer

i

This company page is being actively managed by Cendrol Team. If you also belong to the team, you can get access from here

Cendrol Verified Tick

Compare button icon Compare button icon Compare

Filter interviews by

Cendrol Civil Site Engineer Interview Questions, Process, and Tips

Updated 28 Jun 2024

Top Cendrol Civil Site Engineer Interview Questions and Answers

Cendrol Civil Site Engineer Interview Experiences

4 interviews found

Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - HR 

(4 Questions)

  • Q1. Unit weight of RCC
  • Ans. 

    Unit weight of RCC is typically around 2400 kg/m^3.

    • Unit weight of RCC stands for the density of Reinforced Cement Concrete.

    • It is typically around 2400 kg/m^3, but can vary depending on the mix design.

    • The unit weight is important for calculating the weight of structures and determining load capacities.

  • Answered by AI
  • Q2. Standard thickness of redbrick
  • Ans. 

    Standard thickness of redbrick is 3 inches.

    • Standard thickness of redbrick is typically 3 inches.

    • Redbricks can also come in thicknesses of 2.5 inches or 4 inches depending on the manufacturer.

    • The thickness of redbrick can vary based on the intended use and building regulations.

  • Answered by AI
  • Q3. Modular ratio of plastering
  • Ans. 

    Modular ratio of plastering is the ratio of the modulus of elasticity of the material used for plastering to the modulus of elasticity of the material used for masonry.

    • Modular ratio is used to determine the thickness of plaster required for a given masonry wall.

    • It helps in ensuring that the plastering material is compatible with the masonry material in terms of strength and elasticity.

    • For example, if the modular ratio ...

  • Answered by AI
  • Q4. Steel quantity calculation formula
  • Ans. 

    Steel quantity calculation formula involves calculating the total weight of steel required for a project.

    • Calculate the total weight of steel by multiplying the length, width, and height of the steel member by its density.

    • Consider the shape of the steel member (e.g. beam, column, slab) when calculating the quantity of steel needed.

    • Take into account any additional factors such as wastage, overlaps, and reinforcements in ...

  • Answered by AI

Civil Site Engineer Interview Questions & Answers

user image Rajesh Periyakaruppan

posted on 23 Aug 2023

Interview experience
1
Bad
Difficulty level
-
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Referral

Round 1 - One-on-one 

(2 Questions)

  • Q1. Simple basic question
  • Q2. Block plastering thickeness

Interview Preparation Tips

Interview preparation tips for other job seekers - Worst company labour amount problem one or two company close be carefully new employees

Civil Site Engineer Interview Questions Asked at Other Companies

Q1. What is the minimum Grade of Concrete used in R.C.C. works?
Q2. If you have 10x10 feet room and you have 600x600 mm size tiles th ... read more
asked in TCE
Q3. If your concrete is M50 and 28 days cube test result is below 100 ... read more
Q4. 1.What is the thickness of plastering?, 2.What is name of plaster ... read more
Q5. What is the time period of open bag cement
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via LinkedIn and was interviewed in Nov 2023. There was 1 interview round.

Round 1 - HR 

(1 Question)

  • Q1. No. of steel for 10mm in one bundle
  • Ans. 

    The number of steel rods in one bundle of 10mm diameter varies depending on the manufacturer and supplier.

    • The number of steel rods in one bundle of 10mm diameter can range from 10 to 20 depending on the supplier.

    • It is important to check with the specific supplier for the exact number of steel rods in one bundle.

    • Factors such as length and weight of the steel rods can also affect the number in one bundle.

  • Answered by AI
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Job Portal and was interviewed in Aug 2022. There were 5 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(2 Questions)

  • Q1. About communication skills
  • Q2. Basic technical question
Round 3 - Technical 

(1 Question)

  • Q1. Deep technical question by APM
Round 4 - Technical 

(1 Question)

  • Q1. Another technical round by PM
Round 5 - HR 

(1 Question)

  • Q1. Last round of salary negotiations

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident on interviews, Be on time, Dressing sense - impacts very much on interview day,

Cendrol interview questions for designations

 Civil Engineer

 (1)

Interview questions from similar companies

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via Job Fair and was interviewed in Nov 2023. There were 2 interview rounds.

Round 1 - Aptitude Test 

In general, aptitude tests measure ones competence in logical reasoning, numerical skills, or verbal ability.

Round 2 - Technical 

(5 Questions)

  • Q1. What is the technical in my site ?
  • Q2. What about this company ?
  • Q3. What about my empolys ?
  • Q4. In many cases what will be approch in this technical issus ?
  • Ans. 

    The approach to technical issues in civil engineering often involves analyzing the problem, considering various solutions, and selecting the most feasible option.

    • Identify the technical issue and its impact on the project

    • Analyze the possible solutions and their pros and cons

    • Consider factors such as cost, time, and resources

    • Consult with team members or experts for input

    • Select the most feasible solution and implement it

    • Mo

  • Answered by AI
  • Q5. What is the technical ?

Interview Preparation Tips

Interview preparation tips for other job seekers - i want this job for i will raduse my skill development and i wiil done my job regulry not a skip my company

I applied via Naukri.com

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(3 Questions)

  • Q1. What is cement grade?
  • Ans. 

    Cement grade refers to the strength and quality of cement used in construction.

    • Cement grade is determined by the compressive strength of cement mortar cubes after 28 days of curing.

    • The most commonly used cement grades are 33, 43, and 53, indicating their respective compressive strengths in megapascals (MPa).

    • Higher cement grades are used for structures that require higher strength, such as bridges and high-rise building...

  • Answered by AI
  • Q2. Opc 33, 43, 53 grads.
  • Q3. The standard size of a concrete cube is 15 cm × 15 cm × 15 cm
  • Ans. 

    Yes, the standard size of a concrete cube is 15 cm × 15 cm × 15 cm.

    • The standard size of a concrete cube is used for testing the compressive strength of concrete.

    • The cubes are casted and cured for 28 days before testing.

    • The cubes are tested using a compression testing machine.

    • The compressive strength of concrete is calculated by dividing the maximum load applied to the cube by the cross-sectional area of the cube.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - I had done my Diploma in civil engineering. If you have any vacancy in your reputed organization. Please let me know.

I applied via Company Website and was interviewed in Sep 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. What is the curing on site engineering
  • Ans. 

    Curing is the process of maintaining moisture and temperature conditions for freshly placed concrete to promote its hydration and strength gain.

    • Curing is essential for the strength and durability of concrete.

    • It involves keeping the concrete moist and at a proper temperature for a specific period of time.

    • Curing can be done using various methods such as water curing, membrane curing, and steam curing.

    • The duration of curi...

  • Answered by AI
  • Q2. What is the strength of cement
  • Ans. 

    The strength of cement depends on its grade and type.

    • The strength of cement is measured in terms of compressive strength.

    • The grade of cement determines its strength. Higher the grade, higher the strength.

    • Type of cement also affects its strength. For example, Portland cement has higher strength than lime cement.

    • The strength of cement is also influenced by factors such as curing time, temperature, and humidity.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - I intrest to do a job in your company ,I hope have
a capability to do a job

I applied via Campus Placement and was interviewed in Mar 2022. There were 2 interview rounds.

Round 1 - Group Discussion 

General knowledge

Round 2 - Technical 

(2 Questions)

  • Q1. About civil engineering
  • Q2. General knowledge Civil engineering

Interview Preparation Tips

Interview preparation tips for other job seekers - My self Srikant Mallik
I'm studying BTech engeneering
& Complete my diploma
I'm a good student

I applied via Naukri.com and was interviewed in Sep 2021. There was 1 interview round.

Interview Questionnaire 

3 Questions

  • Q1. Contraction lebal questions
  • Q2. Jenral questions
  • Q3. Atitude prasnalty

Interview Preparation Tips

Interview preparation tips for other job seekers - Do your homework
Practice (out loud)
Share your story
Provide Evidence and data
Mirror the interviewers style
Prepare a few questions
Ask if they have any hesitation
Say thanks.
Interview experience
2
Poor
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. Oops concepts php
  • Q2. Aggregate function php

Cendrol Interview FAQs

How many rounds are there in Cendrol Civil Site Engineer interview?
Cendrol interview process usually has 2-3 rounds. The most common rounds in the Cendrol interview process are HR, Resume Shortlist and Technical.
What are the top questions asked in Cendrol Civil Site Engineer interview?

Some of the top questions asked at the Cendrol Civil Site Engineer interview -

  1. No. of steel for 10mm in one bun...read more
  2. Steel quantity calculation form...read more
  3. Standard thickness of redbr...read more

Tell us how to improve this page.

Cendrol Civil Site Engineer Interview Process

based on 4 interviews

Interview experience

3.5
  
Good
View more

Cendrol Civil Site Engineer Reviews and Ratings

based on 1 review

1.0/5

Rating in categories

2.0

Skill development

1.0

Work-life balance

1.0

Salary

1.0

Job security

1.0

Company culture

1.0

Promotions

1.0

Work satisfaction

Explore 1 Review and Rating
Site Engineer
6 salaries
unlock blur

₹3 L/yr - ₹3.7 L/yr

Data Scientist
4 salaries
unlock blur

₹2 L/yr - ₹5 L/yr

QA QC Engineer
4 salaries
unlock blur

₹3 L/yr - ₹4.5 L/yr

Software Developer
3 salaries
unlock blur

₹3 L/yr - ₹6 L/yr

Data Analyst
3 salaries
unlock blur

₹3.6 L/yr - ₹5 L/yr

Explore more salaries
Compare Cendrol with

TCS

3.7
Compare

Infosys

3.6
Compare

Wipro

3.7
Compare

HCLTech

3.5
Compare
Did you find this page helpful?
Yes No
write
Share an Interview