Filter interviews by
I applied via Job Fair and was interviewed in Nov 2023. There were 2 interview rounds.
Ha Mai handle kar leta hu
The voltage of panels refers to the electrical potential difference across the panels.
The voltage of panels is typically measured in volts (V).
It represents the amount of electrical potential energy per unit charge available in the panels.
The voltage of panels can vary depending on the specific application and design.
For example, solar panels typically have a voltage range of 12V to 48V.
Higher voltage panels are often ...
Load of Motorsports
Motorsports require a variety of loads to function properly.
Loads in motorsports can include the weight of the vehicle, aerodynamic forces, and mechanical resistance.
The load on motorsports components can vary depending on the specific discipline, such as drag racing, circuit racing, or off-road racing.
Understanding and managing the load is crucial for optimizing performance and ensuring safety in mo
Starters are devices used to control the starting and stopping of motors.
Starters provide protection to motors by preventing overload and short circuits.
There are different types of starters such as direct-on-line starters, star-delta starters, and soft starters.
Direct-on-line starters provide full voltage to the motor during start-up.
Star-delta starters initially connect the motor in star configuration to reduce the s...
Top trending discussions
posted on 11 Jan 2024
I applied via Approached by Company and was interviewed in Dec 2023. There were 2 interview rounds.
Motor wind, microwave, induction kooker, LED light, heating iron, mixer grandeur,any all electric work
My i do all this work
posted on 10 Jul 2022
I applied via Naukri.com and was interviewed in Jul 2024. There was 1 interview round.
To divide the frequency of the clock using 3, you can use a divide-by-3 counter circuit.
Use a divide-by-3 counter circuit to divide the clock frequency by 3.
Connect the clock signal to the input of the counter circuit.
Obtain the divided clock signal at the output of the counter circuit.
Example: If the input clock frequency is 12 MHz, the output frequency will be 4 MHz after dividing by 3.
Design a sequential circuit to detect the sequence 001001.
Use flip-flops to store the previous bits in the sequence
Implement a state machine with states corresponding to each bit in the sequence
Transition between states based on input and current state
Output a signal when the final state is reached
8085 microcontroller is a popular 8-bit microprocessor used in various electronic devices.
8085 microcontroller is an 8-bit microprocessor introduced by Intel in 1977.
It has a 16-bit address bus which can access up to 64 KB of memory.
The microcontroller has a set of registers, ALU, control unit, and instruction decoder.
It operates on a single +5V power supply and can run at a maximum clock speed of 3 MHz.
Instructions ar...
Wireless communication is the transfer of information between two or more points without the use of physical connection wires.
Uses electromagnetic waves to transmit data
Common examples include Wi-Fi, Bluetooth, and cellular networks
Allows for mobility and flexibility in communication
Transfer control is the process of transferring the control of a program from one part to another.
Transfer control involves changing the flow of execution within a program.
It can be achieved through various control structures like loops, conditional statements, and function calls.
Examples include using 'if-else' statements to decide which block of code to execute, or using 'goto' statements to jump to a specific part o
Frequency of clock 3 can be divided using a frequency divider circuit.
Use a frequency divider circuit to divide the frequency of clock 3 by a specific factor.
For example, a divide-by-2 circuit will halve the frequency of clock 3.
Choose the appropriate type of frequency divider circuit based on the required division factor.
posted on 21 Aug 2023
I applied via Campus Placement and was interviewed in Jul 2023. There were 2 interview rounds.
An analog signal is a continuous signal that represents information using a continuous range of values.
Analog signals can take on any value within a continuous range.
Examples of analog signals include voltage, current, and sound waves.
Analog signals are used in many electronic devices such as radios and televisions.
Diagnosing circuit diagrams involves analyzing components, connections, and signals to identify issues or faults.
Identify all components in the circuit diagram
Check for proper connections between components
Analyze signal flow through the circuit
Look for any short circuits or open circuits
Use tools like multimeters for testing components
A power supply circuit diagram is a visual representation of the components and connections used to provide electrical power to a device.
Includes components such as transformers, rectifiers, capacitors, and voltage regulators
Shows the flow of electricity from the input source to the output load
May include symbols for AC and DC power sources, ground connections, and voltage levels
Common types include linear power suppli...
I applied via Company Website and was interviewed in Oct 2022. There were 3 interview rounds.
What is least number added to 1056,so that the sum is completely divisaible by 23?
The sum first five prime numbers?
posted on 29 May 2024
I applied via Campus Placement and was interviewed before May 2023. There was 1 interview round.
A superheterodyne receiver is a type of radio receiver that uses frequency mixing to convert a received signal to a fixed intermediate frequency.
Superheterodyne receiver uses frequency mixing to convert incoming signals to a fixed intermediate frequency for easier processing.
Bridge rectifier is a type of rectifier circuit that converts alternating current (AC) to direct current (DC) using four diodes arranged in a brid...
posted on 11 Jan 2024
I applied via Approached by Company and was interviewed in Dec 2023. There were 2 interview rounds.
Motor wind, microwave, induction kooker, LED light, heating iron, mixer grandeur,any all electric work
My i do all this work
posted on 5 Jan 2022
I applied via Walk-in and was interviewed in Dec 2021. There were 9 interview rounds.
based on 1 interview
Interview experience
based on 4 reviews
Rating in categories
Engineer
48
salaries
| ₹1.6 L/yr - ₹4.9 L/yr |
Quality Engineer
46
salaries
| ₹1.8 L/yr - ₹4.1 L/yr |
Production Engineer
45
salaries
| ₹1.7 L/yr - ₹4 L/yr |
Assistant Manager
40
salaries
| ₹4.9 L/yr - ₹9.5 L/yr |
Junior Engineer
33
salaries
| ₹1.5 L/yr - ₹2.8 L/yr |
Himalaya Wellness
Dabur
Patanjali Ayurved
Marico