Upload Button Icon Add office photos

Filter interviews by

BAE Systems Design Engineer Interview Questions and Answers

Updated 23 Sep 2024

BAE Systems Design Engineer Interview Experiences

1 interview found

Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - HR 

(2 Questions)

  • Q1. What you know of bae systems
  • Ans. 

    BAE Systems is a global defense, aerospace, and security company that designs and manufactures military equipment and technology.

    • One of the largest defense contractors in the world

    • Produces a wide range of products including aircraft, ships, vehicles, and electronics

    • Provides services in areas such as cybersecurity and intelligence analysis

  • Answered by AI
  • Q2. Tell me how to design a hvac system
  • Ans. 

    Designing a HVAC system involves determining heating/cooling loads, selecting equipment, ductwork design, and control system integration.

    • Calculate heating and cooling loads based on building size, orientation, insulation, and occupancy

    • Select appropriate HVAC equipment such as furnaces, air conditioners, heat pumps, and ventilation systems

    • Design ductwork layout to distribute air evenly throughout the building

    • Integrate c...

  • Answered by AI

Interview questions from similar companies

I applied via Campus Placement

Interview Preparation Tips

Round: Test
Experience: Had equal weightage between basic mechanical engineering concepts and industry updates
Tips: Recap fundamenals and general awareness abt technology in manufacturing
Duration: 60 minutes

Round: Technical Interview
Experience: Very generic qns. regarding your previous projects, difficulties experienced in them.
Tips: Be confident about the projects and your contibutions in them. Establish that you are hardcore mechanical engineer enthusiast and not looking for a resume highlight.

Round: HR Interview
Experience: Very informal. Didnt have any tricky qns.
Tips: Highlight your enthusiasm in whatever you do in life. Be positive and friendly with the panelists

General Tips: Develop your mechanical engineering enthusiasm in general will seal the deal.
Skills:
Duration: 2
College Name: IIT Madras
Motivation: One of the few companies in India actually doing R&D
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
4-6 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed before Aug 2022. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. About the current Job profile and what i do in regular day to day job
Round 3 - One-on-one 

(1 Question)

  • Q1. About the PLM cyle management
Round 4 - HR 

(1 Question)

  • Q1. Notice period and expectation
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. Basis of Harness
  • Ans. 

    Harness is the collection of wires and cables that transmit signals and power between different components in a system.

    • Harness is used to organize and protect wires and cables in a system.

    • It helps in reducing electromagnetic interference and improving signal integrity.

    • Harness can be customized based on the specific requirements of the system.

    • Examples include wiring harness in automotive industry and cable harness in ae

  • Answered by AI
  • Q2. Basis of Earthing
  • Ans. 

    Earthing is the process of connecting electrical systems to the ground to prevent electric shock and protect equipment.

    • Earthing provides a path for fault currents to flow safely to the ground.

    • It helps in stabilizing voltage levels and protecting against lightning strikes.

    • Different types of earthing systems include TN-C, TN-S, TT, and IT systems.

    • Proper earthing is essential for safety in electrical installations.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare well on Basis
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via Naukri.com and was interviewed in Feb 2023. There was 1 interview round.

Round 1 - Technical 

(4 Questions)

  • Q1. What is slack in routing
  • Ans. 

    Slack in routing refers to the amount of time a task can be delayed without affecting the project schedule.

    • Slack allows for flexibility in project timelines

    • It is the difference between the earliest and latest start time of a task

    • Tasks with zero slack are critical and cannot be delayed

    • Slack is calculated using the Critical Path Method (CPM)

    • Example: If a task has a duration of 5 days and a slack of 2 days, it can be dela...

  • Answered by AI
  • Q2. Where we use branch point
  • Ans. 

    Branch points are used in fluid mechanics to model the flow of fluids through branching pipes.

    • Branch points are used to calculate the pressure and flow rate of fluids at junctions in a pipe system.

    • They are commonly used in the design of plumbing and HVAC systems.

    • Branch points can also be used to model the flow of blood through arteries and veins in the human body.

    • In computational fluid dynamics, branch points are used ...

  • Answered by AI
  • Q3. Bend radius in electrical harness
  • Ans. 

    The bend radius in electrical harness refers to the minimum radius that a wire or cable can be bent without causing damage.

    • The bend radius is important to ensure the longevity and performance of the electrical harness.

    • It is determined by the type and size of the wire or cable being used.

    • Smaller bend radii can lead to increased stress on the wire, potentially causing insulation damage or wire breakage.

    • The bend radius sh...

  • Answered by AI
  • Q4. Explain your last project in your company

Interview Preparation Tips

Interview preparation tips for other job seekers - Be prepare as per JD. confidently explain what you know.

Skills evaluated in this interview

Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. Tableau components and uses
  • Ans. 

    Tableau is a data visualization tool used for creating interactive and shareable dashboards.

    • Tableau components include Tableau Desktop, Tableau Server, and Tableau Online.

    • Tableau is used for data analysis, data visualization, and creating interactive dashboards.

    • Tableau can connect to various data sources such as Excel, SQL databases, and cloud services.

    • Tableau allows users to create visualizations like bar charts, line...

  • Answered by AI
  • Q2. Sql joins and with use cases

Skills evaluated in this interview

Interview experience
3
Average
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
No response

I applied via Naukri.com and was interviewed in Mar 2024. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. What is the sheet metal process
  • Ans. 

    Sheet metal process involves cutting, bending, and assembling metal sheets to create various products.

    • Cutting: Using tools like shears, lasers, or plasma cutters to cut the metal sheets into desired shapes

    • Bending: Utilizing press brakes to bend the metal sheets at specific angles

    • Assembling: Joining the bent and cut metal sheets together using techniques like welding or fasteners

    • Finishing: Applying coatings or finishes ...

  • Answered by AI
  • Q2. Types of Tolerances and explanation
  • Ans. 

    Types of tolerances include bilateral, unilateral, limit, and fit tolerances.

    • Bilateral tolerance: Allows for variation in both directions from the nominal dimension.

    • Unilateral tolerance: Allows for variation in only one direction from the nominal dimension.

    • Limit tolerance: Specifies the maximum and minimum acceptable limits for a dimension.

    • Fit tolerance: Determines the acceptable range of tightness or looseness between

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Good experience the interview

Skills evaluated in this interview

Interview experience
3
Average
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. Based on resume
Round 2 - Behavioral 

(1 Question)

  • Q1. Questions based on resume
Round 3 - HR 

(1 Question)

  • Q1. Introduction & salary discussion
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed before Nov 2023. There were 2 interview rounds.

Round 1 - Technical 

(2 Questions)

  • Q1. About past project experience
  • Q2. Challenging problems faced and how overcame them
Round 2 - HR 

(2 Questions)

  • Q1. Basic questions about personal information
  • Q2. Why you want to join this organisation

Interview Questionnaire 

2 Questions

  • Q1. Explain about the current projects i have dealt with
  • Q2. Questions related to regression fitting

BAE Systems Interview FAQs

How many rounds are there in BAE Systems Design Engineer interview?
BAE Systems interview process usually has 1 rounds. The most common rounds in the BAE Systems interview process are HR.

Tell us how to improve this page.

BAE Systems Design Engineer Interview Process

based on 1 interview

Interview experience

4
  
Good
View more
Procurement Manager
4 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Manager Supplier Development
4 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Supply Chain Management and Procurement Manager
4 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Manager
3 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

IT Manager
3 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare BAE Systems with

Tata Lockheed Martin Aerostructures

3.8
Compare

Raytheon

3.8
Compare

Northrop Grumman

4.1
Compare

Boeing

3.9
Compare
Did you find this page helpful?
Yes No
write
Share an Interview