Upload Button Icon Add office photos
Engaged Employer

i

This company page is being actively managed by ArcelorMittal Nippon Steel Team. If you also belong to the team, you can get access from here

ArcelorMittal Nippon Steel Verified Tick

Compare button icon Compare button icon Compare

Filter interviews by

ArcelorMittal Nippon Steel Senior Manager Interview Questions and Answers

Updated 26 Mar 2024

ArcelorMittal Nippon Steel Senior Manager Interview Experiences

1 interview found

Senior Manager Interview Questions & Answers

user image Pranshu Rana

posted on 26 Mar 2024

Interview experience
5
Excellent
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed before Mar 2023. There were 3 interview rounds.

Round 1 - Technical 

(3 Questions)

  • Q1. Tell us which type of transformer is better and test runs to be conducted before installing new transformer.
  • Ans. 

    Oil-filled transformers are better due to higher efficiency and lower maintenance requirements. Test runs should include insulation resistance, turns ratio, and load testing.

    • Oil-filled transformers are better than dry-type transformers due to higher efficiency and lower maintenance requirements.

    • Test runs should include insulation resistance testing to check for any insulation breakdown.

    • Turns ratio testing should be con...

  • Answered by AI
  • Q2. How many RIO panels and number of DI/DO and AI/AO channels provided in Blast Furnace. During commissioning of blast furnace what were the major problems you faced?
  • Ans. 

    The Blast Furnace is equipped with multiple RIO panels and a variety of DI/DO and AI/AO channels.

    • The Blast Furnace typically has several RIO panels installed for monitoring and control purposes.

    • The number of DI/DO channels provided in a Blast Furnace can vary depending on the specific setup and requirements.

    • During commissioning, major problems may include issues with sensor calibration, communication errors, or softwar...

  • Answered by AI
  • Q3. Which all types of drives you have worked on? During ID run of motor with drive which parameters are measured and which parameters numbers in drive.
Round 2 - HR 

(2 Questions)

  • Q1. How many projects you have completed.
  • Q2. How many years of maintenance experience. Are you willing to transfer. Are you willing to take task in new department. Expected CTC
Round 3 - One-on-one 

(1 Question)

  • Q1. This one is regarding the expectations and what they can provide.

Interview questions from similar companies

I applied via Naukri.com and was interviewed before Oct 2019. There were 4 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Technical questions on plc and scada.

Interview Preparation Tips

Interview preparation tips for other job seekers - be confident and well dressed,speaking fluent english is advantage.

I applied via Job Fair and was interviewed before Feb 2021. There was 1 interview round.

Round 1 - CAMPUS 

(1 Question)

  • Q1. BASIC ENGINEERING QUESTIONS, PROJECT RELATED QUESTIONS

Interview Preparation Tips

Interview preparation tips for other job seekers - PLAN TO WORK ONLY FOR 2-3 YEARS

Interview Questionnaire 

1 Question

  • Q1. Store related question

Interview Questionnaire 

1 Question

  • Q1. SAP MM related question
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
4-6 weeks
Result
Selected Selected

I applied via Referral and was interviewed before Apr 2023. There were 2 interview rounds.

Round 1 - HR 

(2 Questions)

  • Q1. Presently working area description
  • Ans. 

    Currently overseeing daily operations in retail store

    • Managing staff schedules and tasks

    • Ensuring inventory levels are maintained

    • Handling customer complaints and resolving issues

    • Implementing sales strategies to increase revenue

  • Answered by AI
  • Q2. Expected CTC and notice period
  • Ans. As depends on different company policies
  • Answered Anonymously
Round 2 - One-on-one 

(3 Questions)

  • Q1. Introduction for yourself
  • Q2. Overall experience as mentioned is resume.
  • Q3. How fit you in our company

Interview Preparation Tips

Topics to prepare for Viraj Profiles Deputy Manager interview:
  • Self study of resume
Interview experience
5
Excellent
Difficulty level
-
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed in Jun 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(1 Question)

  • Q1. CURRENT PROFILE RELATED
Round 3 - Technical 

(1 Question)

  • Q1. Technical questions related to my current profile.

I applied via Referral and was interviewed in Dec 2021. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. They ask about introduction, my work related questions and last about safety.

Interview Preparation Tips

Interview preparation tips for other job seekers - Be clear during interview and don't be over smart. If doesn't know then simply says no.
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed in Jan 2024. There was 1 interview round.

Round 1 - HR 

(2 Questions)

  • Q1. Ask about myself Experience
  • Q2. Ask about technical questions

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare yourself and your working knowledge
Round 1 - One-on-one 

(1 Question)

  • Q1. On experience based on SMS.
Round 2 - HR 

(1 Question)

  • Q1. You will suggest to department and cordinate
Round 3 - Technical 

(1 Question)

  • Q1. To discribe to total doing work in one day
Round 4 - Aptitude Test 

On round for self introduction

Interview Preparation Tips

Interview preparation tips for other job seekers - To asked for normal equation and please suggest to hr.

ArcelorMittal Nippon Steel Interview FAQs

How many rounds are there in ArcelorMittal Nippon Steel Senior Manager interview?
ArcelorMittal Nippon Steel interview process usually has 3 rounds. The most common rounds in the ArcelorMittal Nippon Steel interview process are Technical, HR and One-on-one Round.
What are the top questions asked in ArcelorMittal Nippon Steel Senior Manager interview?

Some of the top questions asked at the ArcelorMittal Nippon Steel Senior Manager interview -

  1. Tell us which type of transformer is better and test runs to be conducted befor...read more
  2. How many RIO panels and number of DI/DO and AI/AO channels provided in Blast Fu...read more
  3. Which all types of drives you have worked on? During ID run of motor with drive...read more

Tell us how to improve this page.

ArcelorMittal Nippon Steel Senior Manager Interview Process

based on 1 interview

Interview experience

5
  
Excellent
View more
ArcelorMittal Nippon Steel Senior Manager Salary
based on 238 salaries
₹10 L/yr - ₹30 L/yr
7% less than the average Senior Manager Salary in India
View more details

ArcelorMittal Nippon Steel Senior Manager Reviews and Ratings

based on 42 reviews

4.3/5

Rating in categories

3.9

Skill development

4.3

Work-life balance

3.9

Salary

4.1

Job security

4.0

Company culture

3.8

Promotions

3.8

Work satisfaction

Explore 42 Reviews and Ratings
Deputy Manager
723 salaries
unlock blur

₹4.8 L/yr - ₹15.5 L/yr

Assistant Manager
585 salaries
unlock blur

₹3 L/yr - ₹11.6 L/yr

Manager
518 salaries
unlock blur

₹6 L/yr - ₹22 L/yr

Assistant Field Engineer
392 salaries
unlock blur

₹1.8 L/yr - ₹5.2 L/yr

Engineer
350 salaries
unlock blur

₹2.4 L/yr - ₹7.5 L/yr

Explore more salaries
Compare ArcelorMittal Nippon Steel with

Tata Steel

4.1
Compare

JSW Steel

3.9
Compare

Jindal Steel and Power

3.9
Compare

Jindal Stainless

4.2
Compare
Did you find this page helpful?
Yes No
write
Share an Interview