Upload Button Icon Add office photos
Engaged Employer

i

This company page is being actively managed by Aptiv Team. If you also belong to the team, you can get access from here

Aptiv Verified Tick

Compare button icon Compare button icon Compare

Filter interviews by

Clear (1)

Aptiv Scrum Master and Project Lead Interview Questions and Answers

Updated 3 Aug 2023

Aptiv Scrum Master and Project Lead Interview Experiences

1 interview found

Scrum Master and Project Lead Interview Questions & Answers

user image Ramakrishna prasad Sankesa

posted on 3 Aug 2023

Interview experience
4
Good
Difficulty level
Hard
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed before Aug 2022. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(2 Questions)

  • Q1. Explain agile method of management
  • Ans. 

    Agile management is a flexible and iterative approach to project management that focuses on delivering value to customers through collaboration and adaptability.

    • Iterative approach to project management

    • Focus on delivering value to customers

    • Emphasis on collaboration and communication

    • Adaptability to changing requirements

    • Regular feedback and continuous improvement

    • Use of short development cycles or sprints

  • Answered by AI
  • Q2. Explain ASPICE process
  • Ans. 

    ASPICE (Automotive SPICE) is a process assessment model used in the automotive industry to evaluate and improve software development processes.

    • ASPICE is based on the ISO/IEC 15504 standard for process assessment.

    • It helps organizations to assess the maturity of their software development processes.

    • ASPICE defines a set of process attributes and levels of maturity.

    • It is commonly used by automotive manufacturers and suppli...

  • Answered by AI
Round 3 - Behavioral 

(2 Questions)

  • Q1. Explain Team management
  • Q2. How to manage team conflict
  • Ans. 

    Managing team conflict involves active listening, facilitating open communication, finding common ground, and mediating resolutions.

    • Encourage open communication among team members to address conflicts early on

    • Practice active listening to understand all perspectives and emotions involved

    • Facilitate discussions to find common ground and reach a mutually beneficial solution

    • Use mediation techniques to help team members reso...

  • Answered by AI
Round 4 - HR 

(1 Question)

  • Q1. Management of team and atretion management

Interview Preparation Tips

Topics to prepare for Aptiv Scrum Master and Project Lead interview:
  • C
  • AUTOSAR
Interview preparation tips for other job seekers - Automotive Embedded and autosar

Interview questions from similar companies

Interview Questionnaire 

7 Questions

  • Q1. Tell us about yourself. Where are you interning currently?
  • Ans. 

    I am a Technical Lead with experience in software development and project management. Currently, I am not interning anywhere.

    • Experienced Technical Lead with expertise in software development and project management

    • Proficient in programming languages such as Java, Python, and C++

    • Skilled in leading and managing teams to deliver high-quality software products

    • Experience in Agile methodologies and project management tools li

  • Answered by AI
  • Q2. How many total students in your batch?
  • Ans. 

    There were 120 students in my batch.

    • My batch had 4 sections with 30 students each.

    • I graduated with 119 students as one student dropped out.

    • I don't have the exact number but it was around 120.

  • Answered by AI
  • Q3. How many interning with you?
  • Q4. Which other companies come for your branch?
  • Ans. 

    Several companies come for our branch including ABC, XYZ, and DEF.

    • ABC

    • XYZ

    • DEF

  • Answered by AI
  • Q5. How much do they offer?
  • Q6. What do you plan to do in the future?
  • Ans. 

    I plan to continue learning and growing in my technical skills while also taking on leadership roles.

    • Continuing education through courses and certifications

    • Mentoring and coaching junior team members

    • Leading technical projects and initiatives

    • Staying up to date with industry trends and advancements

  • Answered by AI
  • Q7. Tell us about the project you're working on
  • Ans. 

    I am currently leading a team working on developing a mobile application for a retail company.

    • The project involves creating a user-friendly interface for customers to browse and purchase products.

    • We are implementing features such as push notifications, in-app purchases, and social media integration.

    • The app is being developed for both iOS and Android platforms.

    • We are using Agile methodology for development and have week...

  • Answered by AI

Interview Preparation Tips

Round: Test
Experience: An Aptitude Test was held by Aspiring Minds on one day. A few days later, The ones shortlisted had to sit for Group Discussion and finally there were personal interviews.

Round: HR Interview
Experience: Their questions were more specific about the project after this. They about its safety features, about mechanisms of a few components that are being used, the make of the components, the cost of the components..
Tips: Be honest in your interview. If you don't know something, say you don't know about it. Let them know what you do know about. And make sure you know about whatever it is you are working on in detail. The more you know about what you claim to know, the more impressed they get.

College Name: Veermata Jijabai Technological Institute, Mumbai [ VJTI ]

I applied via Approached by Company and was interviewed before Aug 2021. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. Tell us about your last work experience

Interview Preparation Tips

Interview preparation tips for other job seekers - Tackle all the question honestly.
Consider the JD is starting point for preparing the interview.
Interview experience
5
Excellent
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Selected Selected
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all Resume tips
Round 2 - One-on-one 

(3 Questions)

  • Q1. Count the number of bits in a binary format of a given number
  • Ans. 

    To count the number of bits in a binary format of a given number, convert the number to binary and count the digits.

    • Convert the given number to binary format

    • Count the number of digits in the binary representation

    • The number of bits will be equal to the number of digits in the binary representation

  • Answered by AI
  • Q2. Memory sections of C program
  • Ans. 

    Memory sections in C program include stack, heap, data, and code sections.

    • Stack section stores local variables and function call information.

    • Heap section is used for dynamic memory allocation.

    • Data section contains global and static variables.

    • Code section holds the executable code of the program.

  • Answered by AI
  • Q3. Watchdog management

Interview Preparation Tips

Interview preparation tips for other job seekers - Have a good knowledge of C language

Skills evaluated in this interview

Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Aptitude Test 

Reverse the list. What are the data types in Python.

Round 2 - HR 

(2 Questions)

  • Q1. Tell me about yourself.
  • Q2. What were the recent projects which have been completed.

I applied via Naukri.com and was interviewed before Sep 2021. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(6 Questions)

  • Q1. Question on design & development of expertise area (trims, seats, biw, gsm, E&E etc).
  • Q2. Development timeline for a full model change program tentative.
  • Ans. 

    The development timeline for a full model change program varies based on the complexity of the program.

    • Assess the complexity of the program

    • Determine the resources needed for the project

    • Create a detailed project plan with milestones

    • Allocate resources and assign tasks

    • Regularly review progress and adjust timeline as needed

  • Answered by AI
  • Q3. Basic inputs required from project team to start the design process of system
  • Q4. Cost of the part & product.
  • Ans. 

    The cost of the part and product is a crucial factor in determining the overall profitability of the project.

    • The cost of the part and product should be carefully calculated and monitored throughout the project.

    • Factors that can affect the cost include materials, labor, shipping, and overhead expenses.

    • It is important to balance the cost with the quality of the product to ensure customer satisfaction and repeat business.

    • R...

  • Answered by AI
  • Q5. Supplier for the parts & material details
  • Q6. Regulations, Dfmea, DFA, Dfm, vave etc
Round 3 - HR 

(3 Questions)

  • Q1. Why changing the job
  • Q2. Willingness to relocate to chennai
  • Q3. Salary expectations & joing time related

Interview Preparation Tips

Interview preparation tips for other job seekers - Keep your basics of engineering strong & area of expertise related regulations & timeline & part/investment cost related things handy
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - HR 

(1 Question)

  • Q1. Please ask my interview date
Round 3 - Technical 

(4 Questions)

  • Q1. What do you mean by Active Directory?
  • Ans. 

    Active Directory is a directory service developed by Microsoft for Windows domain networks.

    • Centralized database for managing network resources

    • Stores information about users, computers, and other network objects

    • Allows administrators to control access and permissions

    • Supports single sign-on for users to access multiple resources with one login

    • Example: User authentication, group policy management

  • Answered by AI
  • Q2. Name the default protocol used in directory services
  • Ans. 

    LDAP (Lightweight Directory Access Protocol) is the default protocol used in directory services.

    • LDAP stands for Lightweight Directory Access Protocol

    • It is commonly used for accessing and maintaining directory services information

    • LDAP operates over TCP/IP and is used by many different directory services such as Microsoft Active Directory and OpenLDAP

  • Answered by AI
  • Q3. What is RID Master????????
  • Ans. 

    RID Master is a FSMO role in Active Directory responsible for issuing unique identifiers to objects in a domain.

    • RID Master stands for Relative Identifier Master

    • It is one of the Flexible Single Master Operations (FSMO) roles in Active Directory

    • Responsible for allocating pools of unique identifiers (RID) to domain controllers in a domain

    • Ensures that each object created in the domain has a unique identifier

  • Answered by AI
  • Q4. Do we use clustering in Active Directory? Why?
  • Ans. 

    Yes, clustering is used in Active Directory for high availability and fault tolerance.

    • Clustering in Active Directory helps ensure high availability by distributing services across multiple servers.

    • It also provides fault tolerance by allowing services to failover to another server in case of a failure.

    • Examples of clustering technologies used in Active Directory include Windows Server Failover Clustering (WSFC) and Netwo

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Settle into a daily routine. ...
Set measurable goals. ...
Make a list of your achievements. ...
Look for opportunities to volunteer. ...
Focus on the things you can control. ...
Take a step back. ...
Recommended Reading:
Related Articles:

Skills evaluated in this interview

Interview Questionnaire 

8 Questions

  • Q1. Tell me about yourself
  • Ans. 

    I am a highly motivated and organized individual with a passion for leadership and team building.

    • I have several years of experience in management roles, including overseeing teams of up to 20 employees.

    • I am skilled in project management, budgeting, and strategic planning.

    • I have a proven track record of improving team performance and achieving business goals.

    • I am a strong communicator and enjoy collaborating with others...

  • Answered by AI
  • Q2. Describe the work that you did in FSAE club
  • Ans. 

    As a member of FSAE club, I designed and built a formula-style race car for competition.

    • Designed and fabricated various components of the car, including the chassis, suspension, and steering system

    • Collaborated with team members to optimize the car's performance and ensure compliance with competition rules

    • Participated in testing and tuning sessions to improve the car's speed and handling

    • Managed the team's budget and res...

  • Answered by AI
  • Q3. Stress strain curve for ductile material
  • Ans. 

    Stress strain curve for ductile material

    • Ductile materials can undergo large plastic deformations before failure

    • Stress strain curve shows the relationship between stress and strain during deformation

    • The curve has three regions: elastic, plastic, and necking

    • Elastic region: linear relationship between stress and strain

    • Plastic region: non-linear relationship between stress and strain

    • Necking region: localized reduction in c...

  • Answered by AI
  • Q4. Why do we have piston rings?
  • Ans. 

    Piston rings are essential components in an engine that prevent oil from entering the combustion chamber and help maintain compression.

    • Piston rings create a seal between the piston and cylinder wall

    • They prevent oil from entering the combustion chamber

    • They help maintain compression by preventing gases from escaping

    • Piston rings also help dissipate heat from the piston

    • Without piston rings, the engine would lose power and

  • Answered by AI
  • Q5. Why not Masters?
  • Ans. 

    I chose to gain practical experience and develop my skills in the industry.

    • I wanted to gain practical experience in the industry

    • I believed that hands-on experience would be more valuable than a Masters degree

    • I wanted to develop my skills in a real-world setting

    • I felt that pursuing a Masters degree at this time would not align with my career goals

    • I have taken courses and attended workshops to continue my education and s

  • Answered by AI
  • Q6. What skills do you have that can benefit the company?
  • Ans. 

    I have strong leadership, communication, and problem-solving skills that can benefit the company.

    • Leadership skills to motivate and guide team members towards achieving goals

    • Effective communication skills to ensure clear understanding and collaboration among team members and with customers

    • Strong problem-solving skills to identify and resolve issues efficiently and effectively

    • Experience in managing budgets, schedules, an...

  • Answered by AI
  • Q7. On what factors the spring stiffness of a spring depends?
  • Ans. 

    The spring stiffness depends on various factors.

    • The material of the spring

    • The thickness of the wire used in the spring

    • The number of coils in the spring

    • The diameter of the spring

    • The length of the spring

    • The type of loading on the spring

    • The temperature of the spring

    • The presence of any pre-stress in the spring

  • Answered by AI
  • Q8. What non-technical works were you involved in FSAE club?
  • Ans. 

    I was involved in various non-technical works in FSAE club.

    • Organizing and managing team meetings

    • Coordinating with sponsors and arranging sponsorships

    • Planning and executing fundraising events

    • Recruiting new members and conducting interviews

    • Managing team budget and expenses

  • Answered by AI

Interview Preparation Tips

Round: Interview
Experience: It was a technical+HR round.
Tips: Write genuine HR answers.

General Tips: Select the sector that interests you and start revising core courses from the start of your placement semester.
Prepare for non-core also as the options in core sector are limited.
Learn from your failures and keep preparing for upcoming companies.  But do not lose hope.
Talk to seniors already placed in the company that you have targeted. try to attend ppts of all companies where you really want to go.Give some mock interviews. They can boost your confidence.
College Name: IIT KANPUR
Motivation: I was interested in a core mechanical job.
Bosch was on my top list as it makes tools and machines parts that are essentially the bread and butter of mechanical engineering.

I was interviewed in Jun 2017.

Interview Preparation Tips

Round: Resume Shortlist
Experience: it was very optimistic.
Tips: always be positive


Interview Questionnaire 

12 Questions

  • Q1. Tell me about yourself
  • Ans. 

    I am a highly motivated and experienced professional with a strong background in management and leadership.

    • I have over 5 years of experience in management roles

    • I am skilled in team building and employee development

    • I have a proven track record of achieving targets and driving business growth

    • I am adaptable and able to work well under pressure

    • I am passionate about delivering exceptional customer service

  • Answered by AI
  • Q2. Why Bosch ?
  • Ans. 

    Bosch is a leading global technology and services company with a strong focus on innovation and sustainability.

    • Bosch has a reputation for excellence in engineering and innovation

    • The company is committed to sustainability and social responsibility

    • Bosch offers opportunities for career growth and development

    • The company has a diverse and inclusive culture

    • Bosch has a strong global presence and a wide range of products and s

  • Answered by AI
  • Q3. Were you interviewed in any other company ?
  • Ans. 

    Yes, I was interviewed in two other companies.

    • I interviewed at XYZ Corp for a Sales Manager position.

    • I also interviewed at ABC Inc for a Marketing Manager role.

    • Both interviews were great learning experiences.

    • I gained valuable insights into the industry and the expectations of the role.

    • However, I believe this Assistant Manager position is the best fit for my skills and career goals.

  • Answered by AI
  • Q4. Will you be able to manage working/living away from home ?
  • Ans. 

    Yes, I am open to the idea of working and living away from home.

    • I have previously worked in a different city for a year and managed to adapt to the new environment.

    • I am a quick learner and can adjust to new surroundings easily.

    • I am excited about the opportunity to explore new places and cultures.

    • I have a strong support system in place that will help me manage any challenges that may arise.

  • Answered by AI
  • Q5. Strengths and Weaknesses
  • Q6. What did you do at Gtec, Whirlpool (Summer intern) ?
  • Ans. 

    At Gtec, I worked as a software developer and at Whirlpool, I assisted in the development of a new product line.

    • At Gtec, I developed software applications using Java and Python.

    • I also worked on database management and data analysis.

    • At Whirlpool, I assisted in the development of a new product line by conducting market research and analyzing consumer feedback.

    • I also helped in designing the product and creating prototypes...

  • Answered by AI
  • Q7. What is your interest area ?
  • Ans. 

    My interest area is in project management and team leadership.

    • I enjoy organizing and delegating tasks to ensure efficient completion of projects.

    • I have experience leading teams in various projects, including a successful marketing campaign.

    • I am interested in learning new project management techniques and strategies to improve team productivity.

    • I also have a passion for mentoring and developing team members to reach the

  • Answered by AI
  • Q8. Pressure variation in an IC engine
  • Ans. 

    Pressure variation in an IC engine

    • Pressure variation occurs due to the movement of the piston in the cylinder

    • The pressure increases during the compression stroke and decreases during the exhaust stroke

    • The pressure variation affects the performance and efficiency of the engine

    • Factors like fuel quality, ignition timing, and engine load can also affect pressure variation

  • Answered by AI
  • Q9. Working of a spark/ignition plug
  • Ans. 

    A spark plug ignites the fuel-air mixture in the combustion chamber of an internal combustion engine.

    • The spark plug is connected to the ignition coil by a wire.

    • The spark plug has a center electrode and a ground electrode.

    • When the voltage from the ignition coil is high enough, it jumps the gap between the electrodes and creates a spark.

    • The spark ignites the fuel-air mixture in the combustion chamber, causing combustion ...

  • Answered by AI
  • Q10. Force analysis of a spark plug
  • Ans. 

    Force analysis of a spark plug

    • Spark plug is subjected to compression, combustion and exhaust forces

    • Compression force is generated by the piston pushing the air-fuel mixture into the cylinder

    • Combustion force is generated by the ignition of the air-fuel mixture

    • Exhaust force is generated by the expulsion of the exhaust gases from the cylinder

    • The spark plug must withstand these forces to maintain proper engine function

  • Answered by AI
  • Q11. Stresses in pure bending and its variation over the length
  • Ans. 

    Stresses in pure bending and its variation over the length

    • Stresses in pure bending occur when a beam is subjected to a bending moment

    • The maximum stress occurs at the outermost fibers of the beam, known as the extreme fibers

    • The stress varies linearly from zero at the neutral axis to a maximum at the extreme fibers

    • The stress distribution can be represented by a stress diagram

    • The magnitude of the maximum stress depends on...

  • Answered by AI
  • Q12. Detailed drawing of a rectangular block in any projection with dimensions, tolerances, surface finish etc
  • Ans. 

    A detailed drawing of a rectangular block with dimensions, tolerances, and surface finish.

    • Include all three views: front, top, and side

    • Label all dimensions and tolerances clearly

    • Specify the surface finish using appropriate symbols

    • Use standard drafting conventions

    • Include a title block with project information

  • Answered by AI

Interview Preparation Tips

Round: Test
Duration: 60 minutes minutes

Round: Test
Duration: 30 minutes minutes

Round: Resume Shortlist
Experience: The shortlist came only 3-4 hrs before the commencement of interviews so I didn’t have enough time to prepare anything extra after the list was forwarded.

Round: Technical Interview
Experience: The interviewee had a cross-sectional diagram of a fuel injector and there was a graph plotted versus time against it, showing the variation of fuel pressure at 2 places, positions of movable parts in the plug, etc based on which he asked me to tell how the fuel injector worked. He later also asked me force analysis of a movable rod in the injector. Initially, he was mainly asking me the questions related to engines though I told him that my interest area is FEM and simulations. Once my interview was over and I moved out, after 2-3 minutes he again called me back and this time he asked me technical questions related to my interest area only. I answered almost all questions related to engines correctly, so you need to be prepared to answer questions which are not your interest area. I failed to answer a question about variation of stresses over the length of a bended circular beam and I also said that I am not good at fluid mechanics when he asked me about it.


General Tips: Do’s :
1) Revise all courses well beforehand.
2) Get your resumes reviewed by others or at least review it yourself multiple times and ensure that there are at least no spelling or grammatical mistakes.
3) Be prepared to answer any questions related to any software/concept/mechanism mentioned in your resume.
4) Be prepared to answer questions like Tell me about yourself, why this company, why should we choose you/what sets you apart compared to others etc.
5) Ask seniors what all to prepare for specific companies you are targeting.

Don’ts :
1) Don’t target everything that comes. If you don’t get specific to what kind of job you want you may end up not being prepared for either of them.
2) Don’t claim software's or concepts that you don’t know well or haven’t contributed anything to in your resume.
3) Don’t by heart answers to obvious questions word to word. Just make up the points and frame it on spot.
4) Don’t think that because of poor CPI you don’t have any chance. Preparation matters a lot. People with low CPI but good preparation get placed on day 1.

College Name: IIT Kanpur
Contribute & help others!
anonymous
You can choose to be anonymous

Aptiv Interview FAQs

How many rounds are there in Aptiv Scrum Master and Project Lead interview?
Aptiv interview process usually has 4 rounds. The most common rounds in the Aptiv interview process are Resume Shortlist, Technical and Behavioral.
What are the top questions asked in Aptiv Scrum Master and Project Lead interview?

Some of the top questions asked at the Aptiv Scrum Master and Project Lead interview -

  1. How to manage team confl...read more
  2. Explain agile method of managem...read more
  3. Explain ASPICE proc...read more

Recently Viewed

JOBS

Futureahead Business Solutions

No Jobs

INTERVIEWS

Aptiv

No Interviews

SALARIES

SKH Metals

JOBS

R.R. Donnelley

No Jobs

SALARIES

SKH Metals

INTERVIEWS

Aptiv

No Interviews

SALARIES

SKH Metals

INTERVIEWS

Aptiv

No Interviews

SALARIES

SKH Metals

SALARIES

Urban Company

Tell us how to improve this page.

Aptiv Scrum Master and Project Lead Interview Process

based on 1 interview

Interview experience

4
  
Good
View more

Interview Questions from Similar Companies

Tata Motors Interview Questions
4.2
 • 995 Interviews
Maruti Suzuki Interview Questions
4.2
 • 586 Interviews
Hero MotoCorp Interview Questions
4.1
 • 333 Interviews
Bosch Interview Questions
4.2
 • 329 Interviews
TVS Motor Interview Questions
4.0
 • 312 Interviews
MRF Tyres Interview Questions
3.7
 • 298 Interviews
Ashok Leyland Interview Questions
4.1
 • 239 Interviews
Yazaki Interview Questions
3.8
 • 134 Interviews
View all

Aptiv Scrum Master and Project Lead Reviews and Ratings

based on 1 review

2.0/5

Rating in categories

1.0

Skill development

1.0

Work-life balance

3.0

Salary

1.0

Job security

2.0

Company culture

1.0

Promotions

1.0

Work satisfaction

Explore 1 Review and Rating
Senior Software Engineer
733 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Software Engineer
401 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Advanced Software Engineer
394 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Technical Lead
326 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Engineer
168 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Aptiv with

Bosch

4.2
Compare

Continental

3.9
Compare

Samvardhana Motherson Group

3.7
Compare

Mahindra & Mahindra

4.1
Compare
Did you find this page helpful?
Yes No
write
Share an Interview