Filter interviews by
Subgrade GSB work refers to the process of preparing the subgrade by laying Granular Sub Base material.
Subgrade GSB work involves laying and compacting Granular Sub Base material to create a stable foundation for the road or structure.
The thickness of GSB layer and compaction requirements are specified in the project specifications.
Proper compaction is essential to achieve the desired strength and stability of the subg...
The question is likely asking about the properties or characteristics of two specific layers in a civil engineering context.
Identify the specific layers being referred to in the question
Discuss the properties, materials, or functions of each layer
Explain any interactions or considerations between the two layers
Provide examples of common layer combinations in civil engineering projects
I applied via Other and was interviewed in Jul 2021. There was 1 interview round.
The minimum thickness of a slab depends on various factors such as the load it will bear, the type of material used, and the span of the slab.
The minimum thickness of a slab is typically determined by structural engineers based on the design requirements and local building codes.
For residential buildings, the minimum thickness of a concrete slab is often around 4 inches (10 cm).
For commercial or industrial buildings, t...
The size of trade and rise and angle of stairs vary depending on the specific design and regulations.
The size of trade refers to the horizontal distance between two consecutive steps.
The rise is the vertical distance between two consecutive steps.
The angle of stairs is determined by the ratio of rise to trade.
Building codes and regulations provide guidelines for the minimum and maximum values for trade, rise, and angle...
The weight of steel in feet can be calculated by multiplying the volume of steel by its density.
Calculate the volume of steel by multiplying its length, width, and height
Determine the density of the steel material being used
Multiply the volume by the density to obtain the weight of steel in pounds
Convert the weight from pounds to feet if necessary
Pile foundations are used in conditions where the soil is weak or unstable to support the structure.
Pile foundations are used when the soil is too weak to support the load of the structure.
They are also used in areas with expansive soils that can cause excessive settlement.
Pile foundations are suitable for sites with high water tables or in coastal areas where the soil is prone to erosion.
They are commonly used in area...
One bag of cement is approximately equal to 1.25 cubic feet or 0.035 cubic meters.
One bag of cement typically contains 50 kilograms of cement.
The volume of one bag of cement is influenced by the density of the cement.
To convert cubic feet to cubic meters, divide the value by 35.3147.
To convert cubic meters to cubic feet, multiply the value by 35.3147.
Top trending discussions
I applied via Job Fair and was interviewed in Nov 2023. There were 2 interview rounds.
In general, aptitude tests measure ones competence in logical reasoning, numerical skills, or verbal ability.
The approach to technical issues in civil engineering often involves analyzing the problem, considering various solutions, and selecting the most feasible option.
Identify the technical issue and its impact on the project
Analyze the possible solutions and their pros and cons
Consider factors such as cost, time, and resources
Consult with team members or experts for input
Select the most feasible solution and implement it
Mo
I applied via Naukri.com
Cement grade refers to the strength and quality of cement used in construction.
Cement grade is determined by the compressive strength of cement mortar cubes after 28 days of curing.
The most commonly used cement grades are 33, 43, and 53, indicating their respective compressive strengths in megapascals (MPa).
Higher cement grades are used for structures that require higher strength, such as bridges and high-rise building...
Yes, the standard size of a concrete cube is 15 cm × 15 cm × 15 cm.
The standard size of a concrete cube is used for testing the compressive strength of concrete.
The cubes are casted and cured for 28 days before testing.
The cubes are tested using a compression testing machine.
The compressive strength of concrete is calculated by dividing the maximum load applied to the cube by the cross-sectional area of the cube.
I applied via Company Website and was interviewed in Sep 2022. There were 2 interview rounds.
Curing is the process of maintaining moisture and temperature conditions for freshly placed concrete to promote its hydration and strength gain.
Curing is essential for the strength and durability of concrete.
It involves keeping the concrete moist and at a proper temperature for a specific period of time.
Curing can be done using various methods such as water curing, membrane curing, and steam curing.
The duration of curi...
The strength of cement depends on its grade and type.
The strength of cement is measured in terms of compressive strength.
The grade of cement determines its strength. Higher the grade, higher the strength.
Type of cement also affects its strength. For example, Portland cement has higher strength than lime cement.
The strength of cement is also influenced by factors such as curing time, temperature, and humidity.
I applied via Campus Placement and was interviewed in Mar 2022. There were 2 interview rounds.
General knowledge
I applied via Naukri.com and was interviewed in Sep 2021. There was 1 interview round.
I applied via Company Website and was interviewed in Aug 2023. There were 3 interview rounds.
Test of sand and water mineral
Autocad design structure serves as the foundation for creating detailed and accurate engineering drawings.
Autocad design structure includes layers, blocks, and dimensions to organize and display information.
It allows for precise measurements, annotations, and annotations to be added to drawings.
Autocad design structure enables easy editing and modification of drawings.
Examples of autocad design structures include creat...
Design of road line involves determining the alignment, width, and markings of a road to ensure safety and efficiency.
Consider the traffic volume and speed when determining the width of the road.
Ensure proper alignment to minimize sharp curves and slopes.
Include appropriate road markings such as lane dividers, pedestrian crossings, and stop lines.
Take into account factors like drainage, visibility, and road conditions
Construction of road project involves planning, design, and execution of building roads for transportation.
Road project starts with surveying the land and designing the road layout.
Materials like asphalt, concrete, and gravel are used for construction.
Proper drainage systems are essential to prevent water damage to the road.
Quality control measures are implemented to ensure durability and safety.
Regular maintenance and...
based on 1 interview
Interview experience
based on 1 review
Rating in categories
Civil Site Engineer
5
salaries
| ₹2 L/yr - ₹4.5 L/yr |
Safety Officer
5
salaries
| ₹1.8 L/yr - ₹2.4 L/yr |
Project Engineer
4
salaries
| ₹3.6 L/yr - ₹4.8 L/yr |
Site Engineer
4
salaries
| ₹1.8 L/yr - ₹2.5 L/yr |
Project Incharge
4
salaries
| ₹3.6 L/yr - ₹6 L/yr |
Larsen & Toubro Limited
Tata Projects
Shapoorji Pallonji Group
Punj Lloyd