Add office photos
i
Amar Equipments
Compare
Filter interviews by
Amar Equipments Design Engineer Interview Questions, Process, and Tips
Amar Equipments Design Engineer Interview Experiences
1 interview found
I applied via Naukri.com and was interviewed in Dec 2020. There were 4 interview rounds.
Interview Questionnaire
5 Questions
- Q1. What is pressure vessel ?
- Ans.
A pressure vessel is a container designed to hold gases or liquids at a pressure substantially different from the ambient pressure.
Pressure vessels are used in various industries such as chemical, oil and gas, and nuclear.
They are designed to withstand high pressure and temperature.
Examples of pressure vessels include boilers, tanks, and pipelines.
They are subject to strict regulations and safety standards to prevent a...
- Q2. Which ASME codes do you used in previous organization?
- Ans.
I have used ASME B31.1 and B31.3 codes in my previous organization.
ASME B31.1 for Power Piping
ASME B31.3 for Process Piping
Used for design and construction of piping systems
Ensured compliance with safety standards
Reviewed and interpreted code requirements
- Q3. What are types of valves and their applications ?
- Ans.
Valves are devices that regulate, direct or control the flow of fluids or gases. There are various types of valves used in different applications.
Gate valves for on/off control
Ball valves for quick shut-off
Butterfly valves for low-pressure applications
Globe valves for regulating flow
Check valves for preventing backflow
Needle valves for precise flow control
Diaphragm valves for corrosive fluids
Pressure relief valves for ...
- Q4. Types of jackets ( for pressure vessels )
- Ans.
There are several types of jackets used for pressure vessels, including half-pipe, dimple, and conventional jackets.
Half-pipe jackets consist of a pipe that is cut in half and welded to the vessel.
Dimple jackets have a series of dimples pressed into the jacket material to create a heat transfer surface.
Conventional jackets are made of a single or double layer of metal that surrounds the vessel.
Other types of jackets in
- Q5. Types of gearbox and their applications ?
- Ans.
Gearboxes are used to transmit power and torque from one rotating shaft to another. There are various types of gearboxes available for different applications.
Manual transmission gearbox for cars
Automatic transmission gearbox for cars
Planetary gearbox for heavy machinery
Worm gearbox for conveyor systems
Helical gearbox for pumps and compressors
Bevel gearbox for printing presses
Spur gearbox for machine tools
Cycloidal gear...
Interview Preparation Tips
Top trending discussions
Interview questions from similar companies
I was interviewed in Nov 2024.
(4 Questions)
- Q1. Wind calculation as per IS code
- Ans.
The procedure for wind calculation as per IS code involves determining the design wind speed, selecting the appropriate terrain category, and calculating the wind pressure.
Determine the design wind speed based on the location and height of the structure.
Select the appropriate terrain category (rural, urban, etc.) as per IS code guidelines.
Calculate the wind pressure using the formula provided in the IS code.
Consider fa...
- Q2. SFD and BMD of cantilever beam
- Q3. Staad model for fixed pole
- Ans.
A STAAD model for a fixed pole is a structural analysis and design model used to determine the stability and strength of a pole that is fixed in place.
In a STAAD model for a fixed pole, the pole is typically modeled as a vertical member with fixed supports at the base.
The model considers factors such as wind loads, dead loads, and any other relevant loads that may act on the pole.
The analysis helps in determining the s...
- Q4. Design of Square base plate
- Ans.
Key considerations in designing a square base plate
Ensure the base plate is large enough to support the load without excessive deflection
Select appropriate material and thickness to meet structural requirements
Consider the connection details for attaching the base plate to the structure
Account for any potential corrosion or environmental factors that may affect the base plate
Include provisions for anchor bolts or other...
Interview Preparation Tips
(1 Question)
- Q1. Gd@t tsa & dfmea
I applied via Naukri.com and was interviewed in Oct 2023. There were 2 interview rounds.
(2 Questions)
- Q1. Homologation Questions
- Q2. Design Questions
Interview Preparation Tips
Design Engineer Interview Questions & Answers
Armstrong Machine Builders
Anonymous
posted on 24 May 2021
Interview Questionnaire
11 Questions
- Q1. Why leave a current job?
- Q2. Why you to join the organization?
- Q3. What is gear ratio?
- Ans.
Gear ratio is the ratio of the number of teeth on the driving gear to the number of teeth on the driven gear.
Gear ratio determines the speed and torque relationship between two gears.
It is calculated by dividing the number of teeth on the driving gear by the number of teeth on the driven gear.
A gear ratio greater than 1 indicates a reduction in speed and an increase in torque, while a ratio less than 1 indicates an inc...
- Q4. Symbol of First and third angle method?
- Ans.
The symbol of first angle method is a triangle with the vertex pointing downwards. The symbol of third angle method is a triangle with the vertex pointing upwards.
First angle method is commonly used in Europe and Asia while third angle method is commonly used in North America.
In first angle method, the object is placed in the first quadrant while in third angle method, the object is placed in the third quadrant.
The sym...
- Q5. What is a value of K factor?
- Ans.
The K factor is a value used in sheet metal design to determine the amount of springback that occurs during bending.
The K factor is a ratio that relates the neutral axis to the material thickness.
It is used to calculate the bend allowance and bend deduction in sheet metal bending operations.
A higher K factor indicates more springback, while a lower K factor indicates less springback.
Different materials and bending proc...
- Q6. What is spring back effect?
- Ans.
Spring back effect is the tendency of a material to return to its original shape after being deformed.
Spring back effect occurs when a material is bent or stretched and then released, causing it to return to its original shape.
It is commonly observed in materials like metals and polymers.
The amount of spring back depends on the material's elasticity and the magnitude of the deformation.
Spring back can be a desirable or...
- Q7. What do you mistakes in previous company?
- Q8. Are you comfort for do work 12+ hours?
- Q9. How much time you will taken to be a proficiency in inventor?
- Q10. Explain machining operations of given job?
- Ans.
Machining operations involve using various tools and techniques to shape and cut raw materials into the desired shape and size.
The job may involve using lathes, milling machines, grinders, or other specialized equipment.
The machinist must carefully measure and mark the material before cutting or shaping it.
The machinist may need to use different cutting tools or techniques depending on the material being worked on.
Exam...
- Q11. Type of gearboxes?
- Ans.
There are various types of gearboxes including spur, helical, bevel, worm, planetary, and cycloidal.
Spur gearboxes have straight teeth and are the simplest type.
Helical gearboxes have angled teeth and are quieter than spur gearboxes.
Bevel gearboxes are used for changing the direction of power transmission.
Worm gearboxes have a screw-like gear and are used for high reduction ratios.
Planetary gearboxes have multiple gear...
(1 Question)
- Q1. Gd & t and basic questions
Interview Preparation Tips
Selected
(2 Questions)
- Q1. Stress Strain curve
- Q2. IS codes related to steel structures
(1 Question)
- Q1. Gd@t tsa & dfmea
I applied via Naukri.com and was interviewed in Oct 2023. There were 2 interview rounds.
(2 Questions)
- Q1. Homologation Questions
- Q2. Design Questions
Interview Preparation Tips
Design Engineer Interview Questions & Answers
Armstrong Machine Builders
Anonymous
posted on 24 May 2021
Interview Questionnaire
11 Questions
- Q1. Why leave a current job?
- Q2. Why you to join the organization?
- Q3. What is gear ratio?
- Ans.
Gear ratio is the ratio of the number of teeth on the driving gear to the number of teeth on the driven gear.
Gear ratio determines the speed and torque relationship between two gears.
It is calculated by dividing the number of teeth on the driving gear by the number of teeth on the driven gear.
A gear ratio greater than 1 indicates a reduction in speed and an increase in torque, while a ratio less than 1 indicates an inc...
- Q4. Symbol of First and third angle method?
- Ans.
The symbol of first angle method is a triangle with the vertex pointing downwards. The symbol of third angle method is a triangle with the vertex pointing upwards.
First angle method is commonly used in Europe and Asia while third angle method is commonly used in North America.
In first angle method, the object is placed in the first quadrant while in third angle method, the object is placed in the third quadrant.
The sym...
- Q5. What is a value of K factor?
- Ans.
The K factor is a value used in sheet metal design to determine the amount of springback that occurs during bending.
The K factor is a ratio that relates the neutral axis to the material thickness.
It is used to calculate the bend allowance and bend deduction in sheet metal bending operations.
A higher K factor indicates more springback, while a lower K factor indicates less springback.
Different materials and bending proc...
- Q6. What is spring back effect?
- Ans.
Spring back effect is the tendency of a material to return to its original shape after being deformed.
Spring back effect occurs when a material is bent or stretched and then released, causing it to return to its original shape.
It is commonly observed in materials like metals and polymers.
The amount of spring back depends on the material's elasticity and the magnitude of the deformation.
Spring back can be a desirable or...
- Q7. What do you mistakes in previous company?
- Q8. Are you comfort for do work 12+ hours?
- Q9. How much time you will taken to be a proficiency in inventor?
- Q10. Explain machining operations of given job?
- Ans.
Machining operations involve using various tools and techniques to shape and cut raw materials into the desired shape and size.
The job may involve using lathes, milling machines, grinders, or other specialized equipment.
The machinist must carefully measure and mark the material before cutting or shaping it.
The machinist may need to use different cutting tools or techniques depending on the material being worked on.
Exam...
- Q11. Type of gearboxes?
- Ans.
There are various types of gearboxes including spur, helical, bevel, worm, planetary, and cycloidal.
Spur gearboxes have straight teeth and are the simplest type.
Helical gearboxes have angled teeth and are quieter than spur gearboxes.
Bevel gearboxes are used for changing the direction of power transmission.
Worm gearboxes have a screw-like gear and are used for high reduction ratios.
Planetary gearboxes have multiple gear...
Amar Equipments Interview FAQs
Tell us how to improve this page.
Interview Questions for Popular Designations
- Mechanical Engg. Design Interview Questions
- Senior Design Engineer Interview Questions
- Electrical Design Engineer Interview Questions
- Structural Design Engineer Interview Questions
- Piping Designer Interview Questions
- Auto CAD Designer Interview Questions
- Junior Design Engineer Interview Questions
- Hardware Design Engineer Interview Questions
- Show more
Design Engineer Interview Questions from Similar Companies
Amar Equipments Design Engineer Reviews and Ratings
based on 3 reviews
Rating in categories
|
Design Engineer
20
salaries
|  ₹2.2 L/yr - ₹5 L/yr |
|
Service Engineer
8
salaries
| ₹3.5 L/yr - ₹7.5 L/yr |
|
Product Engineer
6
salaries
| ₹3.4 L/yr - ₹8.9 L/yr |
|
Production Engineer
6
salaries
| ₹4 L/yr - ₹5.1 L/yr |
|
Process Engineer
5
salaries
| ₹5.7 L/yr - ₹8.1 L/yr |
BHEL
Thermax Limited
Kirloskar Brothers
Larsen & Toubro Limited
- Home >
- Interviews >
- Amar Equipments Interview Questions >
- Amar Equipments Design Engineer Interview Questions
