Upload Button Icon Add office photos
Engaged Employer

i

This company page is being actively managed by UNI Klinger Team. If you also belong to the team, you can get access from here

UNI Klinger Verified Tick

Compare button icon Compare button icon Compare

Filter interviews by

UNI Klinger Interview Questions, Process, and Tips

Updated 19 Aug 2024

Top UNI Klinger Interview Questions and Answers

View all 9 questions

UNI Klinger Interview Experiences

Popular Designations

10 interviews found

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed in Jul 2024. There was 1 interview round.

Round 1 - Technical 

(5 Questions)

  • Q1. What is the value of CPK
  • Ans. 

    CPK is a statistical measure used to assess the capability of a process to produce output within specification limits.

    • CPK is calculated using the formula: CPK = (USL - LSL) / (6 * standard deviation)

    • A CPK value greater than 1 indicates that the process is capable of producing within specification limits

    • A CPK value less than 1 indicates that the process may not be capable of consistently producing within specification l

  • Answered by AI
  • Q2. What is Ra in roughnes tester
  • Ans. 

    Ra in roughness tester is the average roughness value of the surface profile within a specified sampling length.

    • Ra is a parameter used to quantify the roughness of a surface.

    • It is calculated as the arithmetic average of the absolute values of the profile heights over the evaluation length.

    • Ra provides a measure of the deviation of the surface profile from the mean line.

    • It is commonly used in industries such as manufactu...

  • Answered by AI
  • Q3. What is 7Qc tool and how you used it in daily routine?
  • Ans. 

    7QC tools are a set of quality control tools used for process improvement and problem-solving in quality management.

    • Check sheets: Used to collect and analyze data in a systematic way.

    • Histograms: Used to show frequency distribution of a process.

    • Pareto charts: Helps identify the most significant factors contributing to a problem.

    • Cause-and-effect diagrams: Used to identify and analyze potential causes of a problem.

    • Scatter...

  • Answered by AI
  • Q4. 8D methodology and projects on it
  • Ans. 

    The 8D methodology is a problem-solving approach used in quality management to identify, correct, and prevent recurring problems.

    • The 8D methodology consists of 8 steps: D0 - Plan, D1 - Team Formation, D2 - Problem Description, D3 - Interim Containment Action, D4 - Root Cause Analysis, D5 - Permanent Corrective Action, D6 - Prevent Recurrence, D7 - Recognize Team Effort, D8 - Closure and Team Disbandment

    • It is commonly u...

  • Answered by AI
  • Q5. Previous working related

Quality Engineer Interview Questions asked at other Companies

Q1. What is MSA and addition of msa version, type of msa ,what different between variable data and attibute data .why difine flase and miss rate calculate by msa .
View answer (8)

Rate your
company

🤫 100% anonymous

How was your last interview experience?

Share interview
Interview experience
1
Bad
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. Process of manufacturing
  • Ans. 

    The process of manufacturing involves converting raw materials into finished products through various steps and techniques.

    • Designing the product and creating a prototype

    • Selecting the appropriate materials and tools

    • Setting up the production line and machinery

    • Quality control and testing of the final product

    • Packaging and distribution of the finished goods

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - hr process after resign is very bad experience.

Manufacturing Engineer Interview Questions asked at other Companies

Q1. What is RPN? How its calculated.
View answer (3)
UNI Klinger Interview Questions and Answers for Freshers
illustration image
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
4-6 weeks
Result
Selected Selected

I applied via Company Website and was interviewed in Nov 2023. There were 2 interview rounds.

Round 1 - Technical 

(1 Question)

  • Q1. I can't highlight here
Round 2 - HR 

(1 Question)

  • Q1. My past experience and family background
Interview experience
3
Average
Difficulty level
-
Process Duration
4-6 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed in Jan 2023. There were 5 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Aptitude Test 

Basic aptitude questions like odd one, missing number from series, venn diangram etc.

Round 3 - HR 

(1 Question)

  • Q1. 1. Tell me about yourself 2. About previous experience 3. Why we did left previous Job 4. What are the challenges we face during previous working
  • Ans. 

    I am a Mechanical Design Engineer with previous experience in the field. I left my previous job due to personal reasons. I faced challenges such as tight deadlines and complex design requirements.

    • Mechanical Design Engineer with experience

    • Left previous job due to personal reasons

    • Faced challenges with tight deadlines and complex design requirements

  • Answered by AI
Round 4 - Technical 

(1 Question)

  • Q1. Very basic concepts of Strength of material, thermodynamics and mainly it was related to Fluid power like what is buoyancy, few of Dimensions units, explain the Welding symbol in detail, related to materia...
Round 5 - HR 

(1 Question)

  • Q1. Same questions by previous HR round

Interview Preparation Tips

Interview preparation tips for other job seekers - Do prepare yourself technically strong in Fluid power or related subjects

Mechanical Engg. Design Interview Questions asked at other Companies

Q1. What are the Drawing softwares you're aware of And How much relevant experience you have in for each software
View answer (3)

UNI Klinger interview questions for popular designations

 Planning Engineer

 (1)

 Senior Sales Engineer

 (1)

 Manufacturing Engineer

 (1)

 Head Operational Excellence

 (1)

 Marketing Intern

 (1)

 Quality Engineer

 (1)

 Deputy Manager Marketing

 (1)

 Design Engineer

 (1)

Interview experience
3
Average
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
No response

I applied via Recruitment Consulltant and was interviewed in Apr 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all Resume tips
Round 2 - Aptitude Test 

20 questions test
40 min test
5 are english, 5 for basic math, 5 for reasoning and 5 is for aptitude

Round 3 - One-on-one 

(1 Question)

  • Q1. Grip on customer Products and applications
  • Ans. 

    Having a strong grip on customer products and applications is essential for success in sales engineering.

    • Understand the customer's industry and specific needs

    • Be knowledgeable about the products and services being offered

    • Tailor solutions to meet the customer's requirements

    • Provide demonstrations and training on how to use the products effectively

    • Maintain ongoing communication and support to ensure customer satisfaction

  • Answered by AI

Senior Sales Engineer Interview Questions asked at other Companies

Q1. What is MCCB And MCCB KA ratings?diffrence Between MCB and ELCB?
View answer (3)
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Referral and was interviewed before Jun 2023. There were 2 interview rounds.

Round 1 - Aptitude Test 

General aptitude test

Round 2 - Technical 

(2 Questions)

  • Q1. Do you know about industrial valves types
  • Ans. 

    Yes, industrial valves types include gate valves, globe valves, ball valves, butterfly valves, and check valves.

    • Gate valves are used to control the flow of liquids by opening or closing the gate.

    • Globe valves regulate flow by moving a disc up and down against the flow.

    • Ball valves have a spherical closure unit to control flow.

    • Butterfly valves have a disc that rotates to regulate flow.

    • Check valves allow flow in one direct

  • Answered by AI
  • Q2. What is use of a steam trap
  • Ans. 

    A steam trap is a device used to discharge condensate and non-condensable gases from a steam system while preventing steam from escaping.

    • Steam traps help improve energy efficiency by removing condensate from steam systems.

    • They prevent damage to equipment by ensuring that only steam enters the system.

    • There are different types of steam traps such as mechanical, thermodynamic, and thermostatic traps.

    • Examples of steam trap...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare general aptitude. Good through company website. Study products. Thermodynamics.

Marketing Intern Interview Questions asked at other Companies

Q1. Most of our website traffic comes from India while our target geography is the USA. How will you bring US traffic?
View answer (1)
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed before Sep 2022. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Aptitude Test 

It was totally quantitative , logical test

Round 3 - Group Discussion 

It was based on the topic mobile phones advantageous or not

Round 4 - HR 

(3 Questions)

  • Q1. Where do you see yourself after 5 years
  • Q2. Tell me about yourself
  • Q3. What is your qualification

Interview Preparation Tips

Interview preparation tips for other job seekers - Just prepare basic hr questions and answer them with confidence,this is the key to success

Engineer Trainee Interview Questions asked at other Companies

Q1. If 10 people had a meeting and they shake hands only once with each of the others, then how many handshakes will be there in total ?
View answer (8)

I applied via Referral and was interviewed in Jan 2022. There were 3 interview rounds.

Round 1 - Aptitude Test 
Round 2 - HR 

(1 Question)

  • Q1. Tell me about yourself.
Round 3 - Technical 

(1 Question)

  • Q1. Question releted to the previous experience.

Interview Preparation Tips

Interview preparation tips for other job seekers - Good experience. Happy with the offer.

Planning Engineer Interview Questions asked at other Companies

Q1. Prepare a small given example site schedule with sequencing and duration determine project duration in MSP/on Paper What is critical path method? How will you identify while making on paper rather than MSP? How would you track schedule-Proc... read more
View answer (1)

Interview Questionnaire 

2 Questions

  • Q1. Function of valves in steam application
  • Ans. 

    Valves in steam applications control the flow and pressure of steam to ensure safe and efficient operation.

    • Regulate steam flow and pressure

    • Prevent steam leaks and ensure safety

    • Control temperature and maintain system efficiency

    • Examples: gate valves, globe valves, ball valves, check valves

  • Answered by AI
  • Q2. Pl. Check youtube

Design Engineer Interview Questions asked at other Companies

Q1. Stress Strain curve, What will happen if you use petrol in diesel engine and Diesel in petrol engone.
View answer (5)

I applied via Recruitment Consultant and was interviewed before Jul 2019. There were 4 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Basics of steam engineering.Market dynamic.

Interview Preparation Tips

Interview preparation tips for other job seekers - Learn basics of steam engineering,about gaskets,types of their products as per website.

Deputy Manager Marketing Interview Questions asked at other Companies

Q1. What is sale value of same categories in prior company
View answer (1)
Contribute & help others!
anonymous
You can choose to be anonymous

UNI Klinger Interview FAQs

How many rounds are there in UNI Klinger interview?
UNI Klinger interview process usually has 2-3 rounds. The most common rounds in the UNI Klinger interview process are Technical, Aptitude Test and HR.
How to prepare for UNI Klinger interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at UNI Klinger. The most common topics and skills that interviewers at UNI Klinger expect are Mechanical, Sales, B2B Sales, Customer Satisfaction and Industrial Sales.
What are the top questions asked in UNI Klinger interview?

Some of the top questions asked at the UNI Klinger interview -

  1. What is 7Qc tool and how you used it in daily routi...read more
  2. Do you know about industrial valves ty...read more
  3. What is the value of ...read more

Recently Viewed

INTERVIEWS

Tata Motors

No Interviews

INTERVIEWS

Recruit CRM

No Interviews

INTERVIEWS

KSB Tech

No Interviews

Tell us how to improve this page.

UNI Klinger Interview Process

based on 10 interviews

Interview experience

2.9
  
Poor
View more

Anonymously discuss salaries, work culture, and many more

Get Ambitionbox App

Interview Questions from Similar Companies

Thermax Limited Interview Questions
4.1
 • 250 Interviews
BHEL Interview Questions
4.1
 • 113 Interviews
Forbes Marshall Interview Questions
4.1
 • 41 Interviews
C.R.I. Pumps Interview Questions
3.8
 • 27 Interviews
Ksb Pumps Interview Questions
3.9
 • 27 Interviews
L&T Valves Interview Questions
3.8
 • 10 Interviews
Veljan Hydrair Interview Questions
3.2
 • 2 Interviews
Audco India Interview Questions
4.0
 • 2 Interviews
View all

UNI Klinger Reviews and Ratings

based on 119 reviews

3.7/5

Rating in categories

3.4

Skill development

3.8

Work-life balance

3.3

Salary

3.7

Job security

3.4

Company culture

3.0

Promotions

3.4

Work satisfaction

Explore 119 Reviews and Ratings
Sales Engineer
34 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Quality Engineer
23 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Sales Engineer
21 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Production Engineer
19 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Process Technician
10 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare UNI Klinger with

Forbes Marshall

4.1
Compare

Veljan Hydrair

3.2
Compare

Audco India

4.0
Compare

L&T Valves

3.8
Compare
Did you find this page helpful?
Yes No
write
Share an Interview
Rate your experience using AmbitionBox
Terrible
Terrible
Poor
Poor
Average
Average
Good
Good
Excellent
Excellent