Upload Button Icon Add office photos

Filter interviews by

AL Rashid Trading and Contracting Company Interview Questions and Answers

Updated 15 Apr 2023

AL Rashid Trading and Contracting Company Interview Experiences

1 interview found

Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed before Apr 2022. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. What is the standard of hand and powertool cleaning?
  • Ans. 

    The standard of hand and powertool cleaning is defined by SSPC-SP 2 and SSPC-SP 3 respectively.

    • Hand tool cleaning standard SSPC-SP 2 requires removal of loose paint, rust, and other foreign material using hand tools.

    • Power tool cleaning standard SSPC-SP 3 requires removal of all loose paint, rust, and other foreign material using power tools.

    • Both standards require the surface to be free of oil, grease, and other contami

  • Answered by AI
  • Q2. What is holiday test?
  • Ans. 

    Holiday test is a non-destructive test to detect discontinuities or defects in a coating.

    • Also known as spark testing or pinhole testing

    • Involves passing an electrical current through the coating and checking for any electrical discharge

    • Used to ensure the coating is free from defects that could lead to corrosion or other issues

    • Commonly used in industries such as oil and gas, marine, and construction

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - It's a good platform for getting job in technical field

Coating Inspector Interview Questions asked at other Companies

Q1. What is surface cleanliness?? How do you relate it with surface profile?? Where do you find details about surface profile??
View answer (3)

Interview questions from similar companies

Interview experience
5
Excellent
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via campus placement at BRACT's Vishwakarma Institute of Information Technology, Pune and was interviewed in Nov 2024. There were 3 interview rounds.

Round 1 - Aptitude Test 

Basic Aptitude Questions Reasoning & Verbal Ability

Round 2 - Group Discussion 

How is culture at IT Industries

Round 3 - Technical 

(12 Questions)

  • Q1. What are the tensile forces acts on material
  • Ans. 

    Tensile forces are forces that stretch or pull materials apart.

    • Tensile forces act in the opposite direction of compressive forces

    • Examples of tensile forces include stretching a rubber band or pulling on a rope

    • Tensile strength is a measure of a material's ability to withstand tensile forces

  • Answered by AI
  • Q2. Write all formulas you know of Fluid Mechanics
  • Ans. 

    Formulas in Fluid Mechanics

    • Bernoulli's equation: P + 0.5ρv^2 + ρgh = constant

    • Continuity equation: A1v1 = A2v2

    • Navier-Stokes equation: ρ(∂v/∂t + v∇v) = -∇P + μ∇^2v + ρg

    • Ideal gas law: PV = nRT

    • Poiseuille's Law: Q = πr^4(ΔP)/(8ηL)

  • Answered by AI
  • Q3. Laws of thermodynamics
  • Ans. 

    The fundamental laws of thermodynamics govern the behavior of energy in systems.

    • First Law of Thermodynamics: Energy cannot be created or destroyed, only transferred or converted.

    • Second Law of Thermodynamics: The entropy of an isolated system will always increase over time.

    • Third Law of Thermodynamics: As temperature approaches absolute zero, the entropy of a system approaches a minimum value.

    • Examples: A car engine conve...

  • Answered by AI
  • Q4. What is Fouriers Law write its equation
  • Ans. 

    Fourier's Law describes the flow of heat through a material.

    • Fourier's Law states that the rate of heat transfer through a material is directly proportional to the negative gradient of temperature and the area perpendicular to the direction of heat flow.

    • The equation for Fourier's Law is q = -k * A * (dT/dx), where q is the heat transfer rate, k is the thermal conductivity of the material, A is the cross-sectional area, ...

  • Answered by AI
  • Q5. Explain Iron Carbon phase diagram
  • Ans. 

    The Iron-Carbon phase diagram illustrates the phases and microstructures of iron-carbon alloys as a function of temperature and composition.

    • Shows the phases of iron and carbon at different temperatures and compositions

    • Includes regions for austenite, ferrite, cementite, and pearlite

    • Critical points such as eutectic point and eutectoid point are marked

    • Used to predict the microstructure of steel based on composition and he

  • Answered by AI
  • Q6. Stress Strain Curve Explain
  • Ans. 

    The stress-strain curve shows the relationship between stress (force applied) and strain (resulting deformation) in a material.

    • The curve typically consists of three main regions: elastic deformation, plastic deformation, and fracture.

    • In the elastic region, the material deforms elastically and returns to its original shape when the stress is removed.

    • The plastic region is where permanent deformation occurs, but the mater...

  • Answered by AI
  • Q7. Calculate SFD & BMD
  • Ans. 

    SFD and BMD are calculated using equations of equilibrium and relationships between load, shear force, and bending moment.

    • Calculate reactions at supports using equations of equilibrium

    • Determine the shear force at different points along the beam by considering the applied loads and reactions

    • Calculate the bending moment at different points by integrating the shear force diagram

    • Plot the SFD and BMD based on the calculated...

  • Answered by AI
  • Q8. How to Calculate velocity of fluid flowing through pipe
  • Ans. 

    Velocity of fluid flowing through a pipe can be calculated using the formula Q = A * V, where Q is the flow rate, A is the cross-sectional area of the pipe, and V is the velocity of the fluid.

    • Calculate the cross-sectional area of the pipe using the formula A = π * r^2, where r is the radius of the pipe.

    • Determine the flow rate (Q) of the fluid, which is typically measured in cubic meters per second (m^3/s) or liters per...

  • Answered by AI
  • Q9. What is Difference between entropy and enthalpy
  • Ans. 

    Entropy is a measure of disorder or randomness in a system, while enthalpy is a measure of the heat energy in a system.

    • Entropy is a thermodynamic property that measures the amount of energy in a system that is not available to do work.

    • Enthalpy is a thermodynamic property that measures the total heat content of a system.

    • Entropy increases in irreversible processes, while enthalpy remains constant.

    • Entropy is denoted by S,...

  • Answered by AI
  • Q10. Draw Refrigeration Cycle Graph
  • Ans. 

    The Refrigeration Cycle graph shows the process of cooling a space by transferring heat from inside to outside.

    • The cycle starts with the refrigerant entering the compressor as a low-pressure gas.

    • The refrigerant is compressed, raising its temperature and pressure, before entering the condenser where it releases heat to the surroundings.

    • After losing heat, the refrigerant becomes a high-pressure liquid and flows into the ...

  • Answered by AI
  • Q11. Draw vapour absorption cycle graph
  • Ans. 

    The vapor absorption cycle graph shows the relationship between pressure, temperature, and enthalpy during the process.

    • The graph typically shows pressure on the y-axis and temperature on the x-axis.

    • It includes lines representing the various stages of the cycle such as evaporation, absorption, and desorption.

    • The enthalpy values at different points in the cycle can also be plotted on the graph.

    • Example: The graph will sho...

  • Answered by AI
  • Q12. Draw Rankine otto & diesel cycle graph
  • Ans. 

    The Rankine, Otto, and Diesel cycle graphs are commonly used in thermodynamics to analyze different types of heat engines.

    • The Rankine cycle is used in steam power plants and consists of four processes: heat addition, isentropic expansion, heat rejection, and isentropic compression.

    • The Otto cycle is used in spark-ignition engines and consists of four processes: isentropic compression, constant volume heat addition, isen...

  • Answered by AI

Interview Preparation Tips

Topics to prepare for Worley Graduate Engineer Trainee (Get) interview:
  • Strength of materials
  • Thermodynamics
  • Heat Transfer
  • Fluid Mechanics
Interview preparation tips for other job seekers - Go by preparing each and every subject of Mechanical Engineering they ask very deep technical questions prepare all types of graphs especially
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via AmbitionBox and was interviewed in Nov 2024. There were 4 interview rounds.

Round 1 - Technical 

(2 Questions)

  • Q1. Proper system in working candidates.
  • Q2. Management in supported in department
  • Ans. 

    Management is fully supported in the department, providing resources and guidance to ensure success.

    • Management provides clear goals and expectations for the team

    • Regular check-ins and feedback sessions are conducted to support employee growth

    • Resources such as training programs and tools are readily available for employees

    • Management encourages open communication and collaboration among team members

  • Answered by AI
Round 2 - HR 

(2 Questions)

  • Q1. Payment terms and condition
  • Q2. How many facilities in company provide
Round 3 - Technical 

(2 Questions)

  • Q1. My working in good culture company.
  • Q2. I achieve from zero goal in my target
Round 4 - Technical 

(2 Questions)

  • Q1. Good man for handing
  • Q2. My working in plant maintenance manager work

Interview Preparation Tips

Topics to prepare for Larsen & Toubro Limited Maintenance Manager interview:
  • Dyes
  • TS 16949
Interview preparation tips for other job seekers - My knowledge for conventional machines CNC machine ,PLC machines, robot with, automation machines, maintenance breakdown, documentations, good manpower handling, pm schedule 52 week. Management support team work development and design support knowledge.
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
-
Result
Selected Selected
Round 1 - One-on-one 

(5 Questions)

  • Q1. My Experience is good and best Experience this this my problem is company dropuot , My interview this HR.and CEO. BM .and Accounted this all company best Experience members this me interview show That is ...
  • Q2. Company manufacturing work this BHEL part and CGL part working this manufacturing company
  • Q3. What is skill? Ans:- MS word ms excel and telly knowledge all store keepers knowledge
  • Q4. What this professional and personal? Ans:-I am work times professional and that is work out time personal
  • Q5. What did you house? Working side areas areng
  • Ans. 

    I managed inventory of various items in the store, including working side areas.

    • Managed inventory of products and supplies

    • Organized and maintained stock levels

    • Handled incoming and outgoing shipments

    • Ensured proper storage and labeling of items

    • Performed regular inventory checks and audits

  • Answered by AI

Deputy Regional Planning Manager Interview Questions & Answers

Shapoorji Pallonji Group user image Anonymous

posted on 7 Dec 2024

Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-

I applied via Naukri.com

Round 1 - Technical 

(10 Questions)

  • Q1. Brief about your education, career, previous projects handled, and role & responsibility in past organisations?
  • Q2. Current roles & responsibilities and value addition done by you and your team?
  • Q3. Process flow for planning throughout project life-cycle?
  • Q4. Critical/concerning areas to be monitored?
  • Q5. Productivity and permissible material wastage, process to prepare material reconciliation?
  • Q6. Understanding about claim and type of claim raised/supported to raise in past experience?
  • Q7. Experience of technical aspects and planning assessment required at tendering stage, capabilities to prepare tender submittals and proving insights to management on same?
  • Q8. Necessity of providing PMO support to management?
  • Q9. Understanding about role & responsibility of regional planning manager?
  • Q10. MIS and type of reports prepared in past and their significance for Top managemennt?

Employee Interview Questions & Answers

Tata Technologies user image Vijay duniya Duniya

posted on 19 Dec 2024

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
No response

I applied via Company Website and was interviewed in Nov 2024. There were 5 interview rounds.

Round 1 - Aptitude Test 

Behaviour and believe to inform decisions

Round 2 - Case Study 

Details account information and development of the person

Round 3 - Coding Test 

Slove tha coding problem

Round 4 - Group Discussion 

Further details and self information sharing and openly speaking skills test

Round 5 - One-on-one 

(5 Questions)

  • Q1. Interview questions
  • Q2. Self information
  • Q3. Behaviour to the person and turned
  • Q4. Qualification and believe
  • Q5. Safety skills and pasting maind set

Interview Preparation Tips

Topics to prepare for Tata Technologies Employee interview:
  • CNC Machines
  • Machine Operating
Interview preparation tips for other job seekers - Don't panic and be strong
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Referral and was interviewed in Dec 2024. There were 2 interview rounds.

Round 1 - Technical 

(2 Questions)

  • Q1. Project related question from previous company
  • Q2. Product related question, understanding on train system, competency & skill set
Round 2 - HR 

(1 Question)

  • Q1. Salary expectation, brief on relocation & company provided facility
Interview experience
4
Good
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Not Selected

I was interviewed in Dec 2024.

Round 1 - Technical 

(2 Questions)

  • Q1. Governor is control' by Turbine speed
  • Q2. By oppitimizi combustion fuel,to increase boiler Efficiency
Round 2 - Group Discussion 

As I am shift incharge ,i wanted technical knowledge

Round 3 - Case Study 

Very interesting knowledge Questions should ask for interview

Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via campus placement at National Institute of Technology (NIT), Kurukshetra and was interviewed in Jul 2024. There were 2 interview rounds.

Round 1 - Technical 

(10 Questions)

  • Q1. Tell me about youself?
  • Ans. 

    I am a recent graduate with a degree in engineering, eager to learn and grow in a professional setting.

    • Completed Bachelor's degree in Mechanical Engineering

    • Interned at XYZ Company, where I gained experience in project management

    • Proficient in CAD software such as SolidWorks

    • Strong problem-solving and analytical skills

    • Excellent communication and teamwork abilities

  • Answered by AI
  • Q2. What are your projects ?
  • Ans. 

    I have worked on projects related to renewable energy systems and sustainable building design.

    • Designed and implemented a solar panel system for a residential building

    • Conducted energy audits to optimize energy efficiency in buildings

    • Researched and proposed sustainable materials for construction projects

  • Answered by AI
  • Q3. What you did in internship?
  • Ans. 

    I worked on designing and implementing a new software system for tracking inventory and managing orders.

    • Developed a user-friendly interface for inputting and accessing data

    • Integrated barcode scanning technology for efficient inventory management

    • Collaborated with team members to troubleshoot and improve system functionality

  • Answered by AI
  • Q4. What are your favourite subjects ?
  • Ans. 

    My favorite subjects are Mathematics, Physics, and Computer Science.

    • Mathematics - I enjoy solving complex problems and equations.

    • Physics - I am fascinated by the laws of nature and how things work in the universe.

    • Computer Science - I love coding and developing new software applications.

  • Answered by AI
  • Q5. What is 2nd law of thermodynamics?
  • Ans. 

    The 2nd law of thermodynamics states that the total entropy of an isolated system can never decrease over time.

    • Entropy of a system tends to increase over time

    • Heat energy naturally flows from hot to cold objects

    • Efficiency of energy conversion processes is limited by the 2nd law

  • Answered by AI
  • Q6. What are the kelvin plank and claussis statement?
  • Ans. 

    Kelvin-Planck and Clausius statements are two fundamental principles of thermodynamics.

    • Kelvin-Planck statement: It is impossible to construct a device that operates in a cycle and produces no effect other than the extraction of heat from a single reservoir and the performance of an equivalent amount of work.

    • Clausius statement: It is impossible to construct a device that operates in a cycle and produces no effect other ...

  • Answered by AI
  • Q7. What is difference between 4 stroke and 2 stroke engines?
  • Ans. 

    4 stroke engines have separate intake, compression, power, and exhaust strokes, while 2 stroke engines combine intake and compression in one stroke and power and exhaust in another.

    • 4 stroke engines have separate intake, compression, power, and exhaust strokes

    • 2 stroke engines combine intake and compression in one stroke and power and exhaust in another

    • 4 stroke engines are more fuel efficient and produce less pollution

    • 2 ...

  • Answered by AI
  • Q8. What if we put diesel in SI engine and petrol in CI engine?
  • Ans. 

    Putting diesel in SI engine and petrol in CI engine would lead to inefficient combustion and potential damage to the engines.

    • Diesel is designed to be used in compression ignition (CI) engines, which rely on high compression ratios to ignite the fuel. Using diesel in a spark ignition (SI) engine would result in incomplete combustion and poor performance.

    • Petrol is designed for use in spark ignition (SI) engines, which re...

  • Answered by AI
  • Q9. Differentiate b/w CI and SI engine?
  • Ans. 

    CI engines use compression ignition while SI engines use spark ignition.

    • CI engines compress air to high pressures, causing the fuel to ignite spontaneously

    • SI engines use spark plugs to ignite the fuel-air mixture

    • CI engines are more fuel efficient but produce more emissions

    • Examples of CI engines include diesel engines, while SI engines include gasoline engines

  • Answered by AI
  • Q10. What is your final year project ? Asked in deep
Round 2 - HR 

(3 Questions)

  • Q1. What do yo know about company??
  • Ans. 

    Company is a leading engineering firm specializing in renewable energy solutions.

    • Company was founded in 2005 and has since grown to become a key player in the renewable energy sector.

    • They offer a wide range of services including solar panel installation, wind turbine maintenance, and energy efficiency consulting.

    • Company has completed projects in multiple countries, showcasing their global reach and expertise.

    • They prior...

  • Answered by AI
  • Q2. What is your strength and weakness ?
  • Ans. 

    Strength: Strong problem-solving skills. Weakness: Difficulty delegating tasks.

    • Strength: Able to analyze complex problems and come up with effective solutions.

    • Weakness: Struggle to trust others to complete tasks to my standards.

    • Strength: Excellent attention to detail.

    • Weakness: Sometimes too focused on perfection, leading to delays in project completion.

    • Strength: Strong communication skills, able to effectively convey i...

  • Answered by AI
  • Q3. Are you happy to relocate?
  • Ans. 

    Yes, I am happy to relocate for the right opportunity.

    • I am open to relocating for career growth and new experiences.

    • I have relocated in the past for internships and projects.

    • I understand the importance of being flexible and adaptable in the engineering field.

  • Answered by AI

Interview Preparation Tips

Topics to prepare for Essar Group Graduate Engineer Trainee (Get) interview:
  • Thermodynamics
  • IC Engines
  • Strength of material
  • Material Science
  • Heat Exchangers
Interview preparation tips for other job seekers - Just do preparation of project and internship in deep, the interview was about 20 minutes. And he asks you very basic ques about your stream.
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. Mostly technical discussion type
  • Q2. Where do you see your self after 5 years

AL Rashid Trading and Contracting Company Interview FAQs

How many rounds are there in AL Rashid Trading and Contracting Company interview?
AL Rashid Trading and Contracting Company interview process usually has 2 rounds. The most common rounds in the AL Rashid Trading and Contracting Company interview process are Technical and Resume Shortlist.
What are the top questions asked in AL Rashid Trading and Contracting Company interview?

Some of the top questions asked at the AL Rashid Trading and Contracting Company interview -

  1. What is the standard of hand and powertool cleani...read more
  2. What is holiday te...read more

Tell us how to improve this page.

People are getting interviews through

based on 1 AL Rashid Trading and Contracting Company interview
Job Portal
100%
Low Confidence
?
Low Confidence means the data is based on a small number of responses received from the candidates.

Interview Questions from Similar Companies

Tata Group Interview Questions
4.2
 • 357 Interviews
Adani Group Interview Questions
3.9
 • 177 Interviews
GMR Group Interview Questions
4.1
 • 75 Interviews
GAMMON INDIA Interview Questions
3.9
 • 29 Interviews
Essar Group Interview Questions
3.8
 • 28 Interviews
Punj Lloyd Interview Questions
4.3
 • 18 Interviews
View all

AL Rashid Trading and Contracting Company Reviews and Ratings

based on 90 reviews

4.0/5

Rating in categories

3.6

Skill development

3.8

Work-Life balance

3.8

Salary & Benefits

4.1

Job Security

3.6

Company culture

3.0

Promotions/Appraisal

3.7

Work Satisfaction

Explore 90 Reviews and Ratings
Safety Officer
6 salaries
unlock blur

₹7 L/yr - ₹8 L/yr

Environmental Coordinator
5 salaries
unlock blur

₹16.5 L/yr - ₹24 L/yr

Safety Supervisor
5 salaries
unlock blur

₹8.1 L/yr - ₹12 L/yr

Electrical Engineer
4 salaries
unlock blur

₹6.1 L/yr - ₹24 L/yr

Electrician
4 salaries
unlock blur

₹2.2 L/yr - ₹3.2 L/yr

Explore more salaries
Compare AL Rashid Trading and Contracting Company with

Larsen & Toubro Limited

4.0
Compare

Tata Group

4.2
Compare

Reliance Industries

4.0
Compare

Adani Group

3.9
Compare

Calculate your in-hand salary

Confused about how your in-hand salary is calculated? Enter your annual salary (CTC) and get your in-hand salary
Did you find this page helpful?
Yes No
write
Share an Interview