Airowire Networks Interview Questions and Answers for Experienced

ARP is used to map IP addresses to MAC addresses on a local network.

• ARP stands for Address Resolution Protocol.

• It is used to find the MAC address of a device based on its IP address.

• ARP is essential for communication between devices on the same network.

• ARP cache stores the mapping of IP addresses to MAC addresses for faster communication.

• Example: When a computer wants to communicate with another device on the network, ...read more

HSRP, VRRP, and GLBP are all protocols used for providing redundancy in network environments.

• HSRP (Hot Standby Router Protocol) is Cisco's proprietary protocol for providing high availability by allowing two or more routers to work together in a group.

• VRRP (Virtual Router Redundancy Protocol) is an open standard protocol similar to HSRP, used for providing a virtual IP address that can be shared among multiple routers.

• ...read more

STP, RSTP, and MSTP are protocols for preventing loops in network topologies, each with unique features and improvements.

• STP (Spanning Tree Protocol) is the original protocol, introduced by Dr. Radia Perlman in 1985.

• RSTP (Rapid Spanning Tree Protocol) improves STP by providing faster convergence, typically within seconds.

• MSTP (Multiple Spanning Tree Protocol) allows multiple VLANs to be mapped to a single spanning tree...read more

Root bridge election in a network is determined by the bridge ID and the lowest path cost to the root bridge.

• Root bridge is the bridge with the lowest bridge ID in the network.

• Bridge ID consists of a priority value and a MAC address.

• If two bridges have the same priority, the bridge with the lowest MAC address will become the root bridge.

• Each bridge calculates the path cost to the root bridge based on the cumulative cos...read more

I will troubleshoot network issues by following a systematic approach to identify and resolve the root cause.

• Start by gathering information about the issue reported

• Check physical connections and cables

• Verify network configurations and settings

• Use network monitoring tools to identify any anomalies

• Isolate the issue by testing connectivity between devices

• Check for any network congestion or bandwidth issues

• Consult network ...read more

STP (Spanning Tree Protocol) is a network protocol that ensures a loop-free topology in Ethernet networks.

• STP prevents loops in Ethernet networks by blocking redundant paths.

• It elects a root bridge to serve as the central point for the network.

• STP uses Bridge Protocol Data Units (BPDUs) to exchange information between switches.

• Common STP states include Blocking, Listening, Learning, Forwarding, and Disabled.

• STP converg...read more

DHCP process involves four steps: Discover, Offer, Request, Acknowledge (DORA).

• Discover: Client broadcasts a DHCP Discover message to find available DHCP servers.

• Offer: DHCP server responds with a DHCP Offer message containing IP address lease information.

• Request: Client sends a DHCP Request message to request the offered IP address.

• Acknowledge: DHCP server sends a DHCP Ack message confirming the IP address lease to th...read more

The OSI model is a conceptual framework that standardizes the functions of a telecommunication or computing system into seven different layers. TCP/IP is a protocol suite that is used for communication over the internet.

• OSI model has 7 layers: Physical, Data Link, Network, Transport, Session, Presentation, Application

• TCP/IP is a protocol suite that includes TCP (Transmission Control Protocol) and IP (Internet Protocol)

• ...read more

Subnetting is the process of dividing a network into smaller subnetworks to improve performance and security.

• Subnetting helps in optimizing network performance by reducing network congestion.

• It allows for better organization and management of IP addresses.

• Subnetting enhances network security by isolating different parts of the network.

• Example: Dividing a large network into smaller subnets based on departments or locati...read more

VSF and VSX are both technologies used in networking for virtualization and redundancy, but they have key differences in terms of implementation and capabilities.

• VSF (Virtual Switching Framework) is used in HPE Aruba switches to create a single logical switch from multiple physical switches, providing redundancy and scalability.

• VSX (Virtual Switching Extension) is used in Cisco Nexus switches to create a virtual chassi...read more

Control plane manages routing decisions, data plane handles traffic, and management plane oversees network operations.

• Control Plane: Responsible for routing and signaling; e.g., OSPF, BGP protocols.

• Data Plane: Forwards user data packets; e.g., switches and routers processing traffic.

• Management Plane: Manages network devices and configurations; e.g., SNMP, network management systems.

Troubleshooting DHCP issues involves checking configurations, connectivity, and logs to ensure proper IP address assignment.

• Verify DHCP server is running and reachable. Example: Use 'ping' to check server connectivity.

• Check DHCP scope and ensure there are available IP addresses. Example: Use 'show ip dhcp binding' on Cisco devices.

• Inspect client configurations for correct DHCP settings. Example: Ensure clients are set ...read more

ACL stands for Access Control List and is used to control network traffic by allowing or denying packets based on defined rules.

• ACLs can be used to filter traffic based on source or destination IP address, protocol, port number, etc.

• They can be applied on routers, switches, and firewalls to control access to network resources.

• ACLs can improve network security by restricting unauthorized access to sensitive data.

• Example...read more

To upgrade firmware, you need to download the latest firmware version from the manufacturer's website and follow the specific instructions provided.

• Download the latest firmware version from the manufacturer's website

• Backup current configuration before upgrading

• Follow specific instructions provided by the manufacturer

• Test the new firmware in a controlled environment before deploying it in production

To configure SSID, access the wireless router's settings and enter the desired network name, security type, and password.

• Access the wireless router's settings through a web browser

• Locate the wireless settings section

• Enter the desired SSID (network name)

• Select the appropriate security type (WPA2, WEP, etc.)

• Set a strong password for the network

• Save the changes and restart the router if necessary

To configure 802.1x protocol, you need to set up authentication servers, configure network devices, and define access policies.

• Set up authentication servers such as RADIUS or TACACS+

• Configure network devices (switches, routers, wireless access points) to support 802.1x

• Define access policies for different user roles and devices

• Enable 802.1x on network ports and specify authentication methods (EAP-TLS, PEAP, etc.)