Aeroflex Industries Senior Quality Engineer Interview Questions and Answers

Q1. Any questions related ccm
Add your answer

Q1. Any questions related mechanical Engineer
Add your answer

Q1. Wire Drawing related
Add your answer
Q2. Type of wire manufacturing of process
Ans. 
Wire manufacturing processes include drawing, annealing, stranding, and insulation.
• Wire manufacturing starts with the drawing process, where a metal rod is pulled through a series of dies to reduce its diameter.

• Annealing is then performed to relieve stress and improve the wire's ductility.

• Stranding involves twisting multiple wires together to form a cable or conductor.

• Insulation is applied to protect the wire and provi...read more
Answered by AI
Add your answer
Q3. Technology drafting
Add your answer

Q1. What is your role,what is pump,casting machine,compressor
Ans. 
As a mechanical engineer, my role involves designing, analyzing, and maintaining mechanical systems and equipment.
• A pump is a mechanical device used to move fluids from one place to another.

• A casting machine is used to create metal parts by pouring molten metal into a mold.

• A compressor is a machine that increases the pressure of a gas by reducing its volume.

• As a mechanical engineer, I would be responsible for selecting...read more
Answered by AI
Add your answer
Q2. Fuction of withdrawal unit
Ans. 
Withdrawal unit is used to remove a component or product from a system or process.
• Withdrawal unit is used in manufacturing processes to remove finished products from the production line.

• It can also be used in chemical processes to remove a specific component from a mixture.

• Withdrawal units can be automated or manual depending on the process requirements.

• They are designed to ensure safe and efficient removal of componen...read more
Answered by AI
Add your answer
Q3. About all ccm area,manpower,costing,common materials
Add your answer

Q1. What are tha fuction of otto cycle and Diesel Cycle?
Ans. 
Otto cycle is used in gasoline engines and Diesel cycle is used in diesel engines.
• Otto cycle is a constant volume cycle used in gasoline engines.

• Diesel cycle is a constant pressure cycle used in diesel engines.

• Otto cycle has a higher compression ratio compared to Diesel cycle.

• Otto cycle has a spark plug for ignition while Diesel cycle uses compression ignition.

• Both cycles involve four processes: intake, compression, po
Answered by AI
Add your answer
Q2. Different b/w Stress and Strain?
Ans. 
Stress is the force applied to a material, while strain is the resulting deformation or change in shape.
• Stress is a measure of the internal forces within a material, while strain is the measure of the deformation or change in shape.

• Stress is typically measured in units of force per unit area (such as N/m^2 or Pa), while strain is a dimensionless quantity.

• Stress can cause a material to deform or break, while strain is t...read more
Answered by AI
Add your answer
Q3. How many types of Ramming mass?
Ans. 
There are two main types of Ramming mass: acidic and basic.
• Acidic Ramming Mass: used for lining induction furnaces and arc furnaces.

• Basic Ramming Mass: used for lining steel ladles and EAF (Electric Arc Furnace).
Answered by AI
Add your answer
Q4. How Many Types of Steel?Explained tha percentage of Steel?
Ans. 
There are several types of steel, each with different properties and uses. The percentage of steel in a particular alloy can vary.
• Types of steel include carbon steel, alloy steel, stainless steel, tool steel, and high-speed steel.

• The percentage of steel in an alloy can range from as low as 0.2% to as high as 2.1% depending on the type of steel and its intended use.

• For example, carbon steel typically contains around 0.2...read more
Answered by AI
Add your answer
Q5. Explain Thermodynamics Law 1st 2nd and 3 rd?
Ans. 
First law states energy cannot be created or destroyed, second law states entropy always increases, third law states entropy approaches zero at absolute zero.
• First Law: Energy cannot be created or destroyed, only transferred or converted. Example: A car engine converts fuel into mechanical energy.

• Second Law: Entropy of an isolated system always increases over time. Example: Heat always flows from hot to cold objects.

• Th...read more
Answered by AI
Add your answer

Q1. About my past experiences
Add your answer
Q2. About project cost handling
Add your answer
Q3. How to complete project withing time span
Ans. 
To complete a project within the time span, proper planning, delegation, and monitoring are essential.
• Create a detailed project plan with clear timelines and milestones

• Delegate tasks to team members based on their strengths and expertise

• Regularly monitor progress and make adjustments as needed

• Communicate effectively with team members to ensure everyone is on the same page

• Use project management tools to streamline proce
Answered by AI
Add your answer

Q1. Genral Questions like Salary negotiations location
Add your answer

The HR policy is very bad. The notice period there is 2 months for Assistant Manager and 3 months for Deputy Manager. If you do not serve the notice period, they deduct the gross salary and not the basic salary. And they do not give any full and final breakup certificate.
Because the company I was joining had bought my notice period. But Bharat Wire did not give me any full and final breakup certificate. Due to this, the company I joined did not give me the notice period money. My amount was about 83000 rupees. My money got lost because of Bharat Wire.
I emailed HR many times. But HR did not reply to my email.
If I talk specifically about the electrical department, there is rule of two people who talk like non-technical. And they do not have the manners to talk to seniors and juniors. Only those who do not know anything and who can bear their abuses are working there.
I would especially refuse to join this electrical department as long as these people are there. Even if you join there, within a week you will feel that we took a wrong decision. And you will be mentally stressed. Because you will be tortured so much. The electrical department has a completely toxic environment.
The canteen food is absolutely bad. Even dogs would not like such food.
Bharat Wire had a very good image in the market long ago. People wanted to join this company.
but today no one wants to join Bharat Wire whoever comes to know about it. That is why before joining, people connect with people on LinkedIn and take feedback, which is also right.

Q1. Technical and server related questions
Add your answer
Q2. Current CTC related questions
Add your answer

Questions related to your position and department

Q1. Technical questions related to your skills, experience and knowledge
Add your answer

Q1. Questions related to previous profile and experience
Add your answer