Adani Green Energy Interview Questions, Process, and Tips

Q1. How cheek motor condition
Ans. 
To check a motor's condition, assess its electrical parameters, mechanical integrity, and operational performance.
• Measure voltage and current: Use a multimeter to check if the motor is receiving the correct voltage and current.

• Inspect insulation: Perform an insulation resistance test to ensure the windings are not shorted or grounded.

• Check for unusual noises: Listen for grinding or rattling sounds that may indicate mec...read more
Answered by AI
Add your answer
Q2. What is limit switch
Ans. 
A limit switch is an electromechanical device that detects the presence or position of an object, often used for control and safety.
• Used in industrial machinery to control the movement of parts.

• Commonly found in elevators to detect the position of the elevator car.

• Used in conveyor systems to stop the belt when an object is detected.

• Can be used in safety applications, such as emergency stop buttons.
Answered by AI
Add your answer
Q3. What is no and nc
Ans. 
NO (Normally Open) and NC (Normally Closed) refer to relay contact states in electrical circuits.
• NO contacts are open when the relay is not energized, allowing current to flow only when activated.

• Example: A light switch that turns on a light when pressed is a NO contact.

• NC contacts are closed when the relay is not energized, allowing current to flow until activated.

• Example: A safety switch that cuts power when triggere...read more
Answered by AI
Add your answer
Q4. How to control wireing cheek2
Ans. 
Wiring checks ensure electrical systems are safe and functional, preventing faults and ensuring compliance with standards.
• 1. Visual Inspection: Check for damaged insulation or exposed wires.

• 2. Continuity Testing: Use a multimeter to ensure there are no breaks in the circuit.

• 3. Insulation Resistance Testing: Measure the resistance of insulation to prevent leakage currents.

• 4. Voltage Testing: Verify that the correct volt...read more
Answered by AI
Add your answer
Q5. How slove technical issue
Ans. 
To solve technical issues, I follow a systematic approach involving identification, analysis, and resolution.
• Identify the issue: Gather information about the problem, such as symptoms and error messages.

• Analyze the root cause: Use tools like the 5 Whys or Fishbone Diagram to pinpoint the underlying issue.

• Develop a solution: Brainstorm potential fixes and evaluate their feasibility.

• Implement the solution: Apply the chos...read more
Answered by AI
Add your answer

Q1. Lapping zone in column
Ans. 
Lapping zone in column refers to the area where the stationary phase and mobile phase meet in chromatography.
• The lapping zone is where the sample components interact with the stationary phase and mobile phase.

• It is important for separation efficiency and resolution in chromatography.

• Examples include the interface between the liquid and solid phases in column chromatography.
Answered by AI
Add your answer
Q2. Details discussion about pile foundation and mms structure
Add your answer

Q1. Brief discussion about the is code of practice for steel structure
Ans. 
IS code of practice for steel structures is a set of guidelines and standards for designing and constructing steel structures.
• The IS code for steel structures in India is IS 800:2007.

• It covers various aspects such as material properties, design criteria, construction practices, and quality control.

• The code provides guidelines for the design of steel structures to ensure safety, efficiency, and durability.

• It is importan...read more
Answered by AI
Add your answer
Q2. Test of concrete, it's characteristics regards structure
Ans. 
Concrete is a composite material made of cement, water, aggregates, and often admixtures. It has high compressive strength but low tensile strength.
• Concrete is a mixture of cement, water, and aggregates like sand and gravel

• It has high compressive strength, making it suitable for structural applications

• However, it has low tensile strength, which can lead to cracking under tension

• Reinforcement like steel bars can be adde...read more
Answered by AI
Add your answer

Q1. Preparation of bbs about all structure
Add your answer
Q2. Detailed discussion about the erection and fabrication work
Add your answer

Q1. Brief acknowledgement about the total station
Ans. 
Total station is a surveying instrument used for measuring angles and distances in surveying and construction.
• Total station combines theodolite, electronic distance meter, and software to measure angles and distances accurately.

• It is commonly used in construction, civil engineering, and land surveying.

• Total station can be used for setting out buildings, roads, and other infrastructure projects.

• It provides precise measu...read more
Answered by AI
Add your answer
Q2. If you want to do in wind then you must have the better exp about steel structure and geotechnical engineering
Add your answer

How to effectively address and resolve any problem.

Engage in a group discussion regarding any problem and work collaboratively to find a solution.

Online Test through adani portal

Q1. Questions related to company JD and your resume.
Add your answer

Q1. Introduction, previous experience and salary negotiation
Add your answer

Q1. What is Dfig in wind turbine
Ans. 
Dfig stands for Doubly Fed Induction Generator, a type of generator used in wind turbines.
• Dfig is a type of generator that allows variable speed operation in wind turbines.

• It has two sets of windings - one connected to the grid and the other to a converter.

• The converter controls the power flow between the grid and the generator, allowing for better efficiency.

• Dfig is commonly used in modern wind turbines for its abilit...read more
Answered by AI
Add your answer
Q2. What is working principle of wind turbine
Ans. 
Wind turbines convert kinetic energy from the wind into mechanical power.
• Wind turns the blades of the turbine

• Blades are connected to a drive shaft

• Drive shaft spins a generator to produce electricity

• Electricity is then fed into the grid or stored in batteries

• Turbines can have horizontal or vertical axis
Answered by AI
Add your answer

50 Nos of (Reasoning, English and Math) in 12 min

Q1. SCM related Questions
Add your answer

Q1. Basic introduction and salary negotiation
Add your answer

Q1. Related Land act and revenue rules and process of land acquisition
Add your answer
Q2. RELATED OUR DEPARTMENT
Add your answer

Q1. What is the conversion process in karnataka
Ans. 
The conversion process in Karnataka refers to the process of changing land use from agricultural to non-agricultural purposes.
• Conversion process involves obtaining permission from the concerned authorities.

• Applicants need to submit relevant documents and pay the necessary fees.

• The process may vary based on the specific location and type of land.

• Examples include converting agricultural land into residential or commercia
Answered by AI
Add your answer
Q2. How to your going attend ROW issues
Add your answer