Filter interviews by
Clear (1)
I was interviewed in Jan 2025.
Another company's make refers to the brand or manufacturer of their products.
The make of a company can refer to the brand name of their products.
It can also refer to the manufacturer of the products.
For example, Apple's make would be Apple Inc. for their iPhones and MacBooks.
The salary of a junior engineer can vary depending on factors such as location, industry, and level of experience.
Salary can range from $50,000 to $70,000 per year for a junior engineer.
Location plays a significant role in determining salary, with higher salaries typically found in major cities.
Industry also impacts salary, with sectors like technology and aerospace offering higher pay.
Experience level can also affect ...
Poka yoke is a Japanese term for mistake-proofing or error-proofing in manufacturing processes.
Poka yoke is a method or device designed to prevent mistakes or errors during production.
It helps in ensuring quality by eliminating defects at the source.
Examples of poka yoke include sensors that detect missing parts in assembly lines or fixtures that only allow parts to be assembled in the correct orientation.
The company is currently manufacturing automotive components, electronic devices, and consumer goods.
Automotive components
Electronic devices
Consumer goods
Kaizen is a Japanese term meaning continuous improvement. It involves making small, incremental changes to processes in order to improve efficiency and quality.
Kaizen focuses on making small, continuous improvements rather than large, drastic changes
It involves all employees in the organization, from top management to frontline workers
Kaizen aims to eliminate waste, improve productivity, and enhance quality
Examples of ...
SWCT stands for Star Wars Card Trader, a digital trading card app for Star Wars fans.
SWCT is a mobile app where users can collect and trade digital trading cards featuring characters, vehicles, and scenes from the Star Wars universe.
Users can buy card packs, trade cards with other users, and participate in in-app events and challenges.
Some rare or limited edition cards can be highly sought after and valuable within the
Top trending discussions
I was interviewed before Jul 2016.
My areas of interest include electrical systems, mechanical systems, and preventive maintenance.
Electrical systems: I have a strong interest in troubleshooting and repairing electrical systems, such as motors, control panels, and wiring.
Mechanical systems: I enjoy working with mechanical components, such as pumps, valves, and conveyors. I have experience in maintaining and repairing these systems.
Preventive maintenance...
posted on 26 Nov 2017
A combination set is a tool used for measuring and marking angles, distances, and depths accurately.
Combination sets are commonly used in engineering and construction.
They typically include a protractor, ruler, and depth gauge.
The protractor is used to measure and mark angles.
The ruler is used to measure and mark distances.
The depth gauge is used to measure and mark depths.
Combination sets are versatile and can be used...
There are several types of CNC control units used in engineering.
There are three main types of CNC control units: open-loop, closed-loop, and computer numerical control (CNC).
Open-loop control units are the simplest and least expensive, but they do not provide feedback on the actual position of the machine.
Closed-loop control units use feedback sensors to continuously monitor and adjust the position of the machine, res...
I was interviewed in Jul 2017.
posted on 19 May 2021
I applied via Naukri.com and was interviewed in Nov 2020. There were 4 interview rounds.
posted on 26 May 2020
I applied via Walk-in and was interviewed in Apr 2020. There were 3 interview rounds.
The 7 QC tools are a set of basic quality control tools used to identify and solve quality problems.
Check sheets
Control charts
Histograms
Pareto charts
Scatter diagrams
Stratification
Cause-and-effect diagrams
As a Quality Engineer in my previous company, I was responsible for ensuring product quality, conducting audits, and implementing quality control processes.
Conducted product quality inspections and audits
Implemented quality control processes to improve product quality
Analyzed data to identify areas for improvement
Collaborated with cross-functional teams to address quality issues
Ensured compliance with industry standard
QA focuses on preventing defects while QC focuses on identifying and fixing defects.
QA is a proactive process that involves planning, designing, and executing tests to prevent defects from occurring.
QC is a reactive process that involves identifying defects through testing and then fixing them.
QA is focused on the entire software development life cycle while QC is focused on the testing phase.
Examples of QA activities ...
I applied via Recruitment Consultant and was interviewed before Nov 2020. There were 3 interview rounds.
Maintenance jobs are crucial for ensuring the smooth functioning of equipment and preventing breakdowns.
Maintenance jobs involve regular inspections, cleaning, and repairs of equipment.
They help to identify and fix issues before they become major problems.
Proper maintenance can extend the lifespan of equipment and reduce the need for costly replacements.
Examples of maintenance jobs include oil changes, filter replaceme...
I applied via Company Website and was interviewed in Nov 2023. There was 1 interview round.
SPC is Statistical Process Control used to monitor and control quality. Cp and Cpk measure process capability. Sigma is population standard deviation.
SPC is a statistical method used to monitor and control processes to ensure quality standards are met.
Cp and Cpk are indices used to measure process capability. Cp measures how well the process fits within the specification limits, while Cpk measures how centered the proc...
MSA stands for Measurement System Analysis. GAGE R&R is a method to assess measurement system variation. NDC refers to the Number of Distinct Categories.
MSA is a statistical method used to evaluate the measurement system's ability to provide accurate and reliable data.
GAGE R&R is a specific MSA technique used to assess the variation contributed by the measurement system itself.
The output of GAGE R&R is typically expres...
SPC (Statistical Process Control) is a key tool in the Six Sigma process for monitoring and controlling process variation.
SPC is used to collect and analyze data in real-time to ensure that a process is stable and capable of meeting customer requirements.
It involves the use of control charts to monitor process performance and identify any special causes of variation.
SPC helps in identifying and addressing process issue...
I applied via Naukri.com and was interviewed in Mar 2024. There was 1 interview round.
I applied via Recruitment Consultant and was interviewed in Feb 2021. There were 3 interview rounds.
based on 1 interview
Interview experience
based on 17 reviews
Rating in categories
Junior Engineer
506
salaries
| ₹0 L/yr - ₹0 L/yr |
Assistant Manager
391
salaries
| ₹0 L/yr - ₹0 L/yr |
Production Engineer
293
salaries
| ₹0 L/yr - ₹0 L/yr |
Senior Engineer
290
salaries
| ₹0 L/yr - ₹0 L/yr |
Engineer
268
salaries
| ₹0 L/yr - ₹0 L/yr |
Sumitomo Electric Industries
TE Connectivity
Delphi Automotive Systems
Molex