Wipro Networking Trainee Interview Questions and Answers

Q1. What is hsrp,vrrp
Ans. 
HSRP (Hot Standby Router Protocol) and VRRP (Virtual Router Redundancy Protocol) are network protocols used for providing high availability in routing.
• HSRP and VRRP are used to provide redundancy for routers in a network.

• They allow for automatic failover in case of a router failure.

• HSRP is a Cisco proprietary protocol, while VRRP is an open standard protocol.

• Both protocols use a virtual IP address that clients use as t...read more
Answered by AI
Add your answer

Normal aptitude group discussion assignment case study

Coding test assignment one on one round

Q1. Technical vs no tech
Ans. 
Technical skills are essential for a Network Engineer, but soft skills are also important for effective communication and teamwork.
• Technical skills are necessary for configuring and troubleshooting network devices.

• Soft skills like communication, teamwork, and problem-solving are crucial for working effectively with colleagues and clients.

• Balancing technical expertise with interpersonal skills is key to success in the r...read more
Answered by AI
Add your answer
Q2. Dhcp vs dns gdp vs rdp frp vs 30nd
Ans. 
DHCP is a protocol used to assign IP addresses dynamically to devices on a network, while DNS is a system that translates domain names to IP addresses.
• DHCP assigns IP addresses to devices on a network dynamically

• DNS translates domain names to IP addresses

• RDP (Remote Desktop Protocol) allows users to remotely connect to a computer

• FRP (Fiberglass Reinforced Plastic) is a material used in construction

• 30nd does not seem to
Answered by AI
Add your answer

Q1. Q1. What is Protocol and full Explanation. Ans. Protocol is a set of rules which are used in digital communication to connect network device and Exchange information between them.
Ans. 
Protocol is a set of rules used in digital communication to connect network devices and exchange information.
• Protocols define the format, timing, sequencing, and error checking of data transmission.

• Examples of protocols include TCP/IP, HTTP, FTP, and SMTP.

• Protocols ensure that devices can communicate effectively and understand each other's data.

• Different protocols serve different purposes, such as routing data, sending
Answered by AI
Add your answer
Q2. Q2. What is a Gateway and full Explanation. Ans. Gateway is a hardware device that is used to connect two dissimilar type of network. It allows us to send and receive data through the internet event it is ...read more
Ans. 
A gateway is a hardware device that connects two dissimilar types of networks, allowing data to be sent and received through the internet even if it is a LAN network.
• Gateway acts as an entry and exit point for data traffic between networks

• It translates data between different network protocols

• Examples include routers and firewalls that connect a local network to the internet
Answered by AI
Add your answer

Some aptitude and coding question

Q1. Explain OSI modal.
Ans. 
The OSI model is a conceptual framework that standardizes the functions of a telecommunication or computing system into seven different layers.
• The OSI model stands for Open Systems Interconnection model.

• It consists of seven layers: Physical, Data Link, Network, Transport, Session, Presentation, and Application.

• Each layer has specific functions and communicates with the adjacent layers.

• For example, the Physical layer de...read more
Answered by AI
Add your answer
Q2. Difference between unicasting, Multicasting, Broadcasting.
Ans. 
Unicasting sends data from one sender to one receiver, Multicasting sends data from one sender to multiple receivers, Broadcasting sends data from one sender to all receivers in the network.
• Unicasting is one-to-one communication.

• Multicasting is one-to-many communication.

• Broadcasting is one-to-all communication.

• Unicasting is used in TCP connections.

• Multicasting is used in streaming video or audio to multiple users.

• Broad...read more
Answered by AI
Add your answer

Q1. How many types of VLAN in Computer Networking Ans. (1) Defaults VLAN (2) Data VLAN (3) Voice VLAN (4) Management VLAN (5) Native VLAN
Ans. 
There are five types of VLAN in computer networking: Default VLAN, Data VLAN, Voice VLAN, Management VLAN, and Native VLAN.
• Default VLAN is the VLAN that all switch ports are assigned to by default.

• Data VLAN is used to carry regular network traffic.

• Voice VLAN is used to carry voice traffic for VoIP systems.

• Management VLAN is used for managing network devices.

• Native VLAN is used for untagged traffic on a trunk port.
Answered by AI
Add your answer
Q2. What is VLAN Ans. Divides on Single Broadcast into Multiple to Broadcast Domains (OR) VLAN Provide a way to Group devices within a VLAN
Ans. 
VLAN stands for Virtual Local Area Network. It is a network technology that allows for the creation of multiple virtual networks within a single physical network.
• VLANs divide a single broadcast domain into multiple broadcast domains.

• They provide a way to group devices within a VLAN, allowing for better network management and security.

• VLANs can be used to separate different departments or functions within an organizatio...read more
Answered by AI
Add your answer

Q1. What is stuck switching?
Ans. 
Stuck switching refers to a situation where a network switch is unable to forward traffic due to a malfunction or configuration issue.
• Stuck switching can occur when a switch's forwarding table becomes corrupted or when there is a hardware failure.

• It can also happen if there is a loop in the network causing broadcast storms.

• Troubleshooting stuck switching involves checking the switch's configuration, monitoring network ...read more
Answered by AI
Add your answer
Q2. What is bgp path selection process
Ans. 
BGP path selection process determines the best path for routing based on various attributes.
• BGP selects the path with the highest weight attribute first

• If weights are the same, BGP looks at the local preference attribute

• Next, BGP considers the AS path length

• BGP then checks the origin code attribute

• After that, BGP looks at the MED (Multi-Exit Discriminator) attribute

• If all else is equal, BGP chooses the path with the lo...read more
Answered by AI
Add your answer
Q3. What is stub area
Ans. 
A stub area is an OSPF area that does not contain external routes.
• Stub areas reduce the amount of routing information exchanged within an OSPF network.

• Stub areas use a default route to reach external networks.

• Stub areas are commonly used to reduce the size of the OSPF database and improve network performance.
Answered by AI
Add your answer
Q4. What is stp? how to work.
Ans. 
STP stands for Spanning Tree Protocol, used in network environments to prevent loops and ensure redundant paths are utilized efficiently.
• STP is a network protocol used to prevent loops in Ethernet networks.

• It works by selecting a single path for data traffic while blocking redundant paths.

• STP elects a root bridge and calculates the shortest path to each network segment.

• If a link fails, STP recalculates the network topo...read more
Answered by AI
Add your answer

Q1. Technical questions
Add your answer
Q2. Sellery discussion
Add your answer
Q3. Knowledge of networking
Add your answer
Q4. Knowledge of networking ccna
Add your answer
Q5. Routing and switching knowledge
Add your answer
Q6. Basic networking questions
Add your answer

Q1. What can I do
Add your answer
Q2. Simple way discussion
Add your answer

Coding is a most important in computer

Aptitude test online mode for the mcq

Group discussion in a company details for tha gd

Assignment test for tha mcq test online

Q1. Interview questions is the most important round
Add your answer
Q2. Self introduced and company details
Add your answer

Q1. Hr round is document verification
Add your answer
Q2. Self introduced and education details
Add your answer