Vizag Steel Interview Questions, Process, and Tips for Experienced

General studies, mathematics, and technical subjects

Q1. Self Introduction
Add your answer
Q2. Why I want to join rinl
Ans. 
I want to join RINL because of its reputation for innovation, growth opportunities, and commitment to excellence.
• RINL is known for its innovative practices in the steel industry

• There are ample opportunities for career growth and development within RINL

• RINL has a strong commitment to excellence and quality in its operations
Answered by AI
Add your answer
Q3. About my credentials
Add your answer
Q4. Do you think you will get a job in rinl
Ans. 
I am confident in my skills and experience, and believe I have a good chance of getting a job in RINL.
• I have relevant experience and qualifications for the position

• I have a strong track record of success in similar roles

• I have researched RINL and believe my skills align well with their needs
Answered by AI
Add your answer

Q1. File is made of
Add your answer
Q2. Steel rule is a made of
Add your answer
Q3. The point angle of scriber is
Ans. 
The point angle of scriber is the angle between the two cutting edges of the scriber.
• The point angle is typically between 30 and 60 degrees.

• It affects the sharpness and durability of the scriber.

• A larger point angle will result in a stronger but less sharp scriber.

• A smaller point angle will result in a sharper but less durable scriber.
Answered by AI
View 1 more answer
Q4. The point angle of centre punch
Ans. 
The point angle of a centre punch is typically 90 degrees.
• The point angle is the angle between the two sides of the punch tip.

• A 90 degree point angle is the most common and versatile for general use.

• Different point angles can be used for specific applications, such as 60 degrees for softer materials.

• The point angle affects the size and shape of the indentation made by the punch.
Answered by AI
View 1 more answer

Q1. What is the heat treatment
Ans. 
Heat treatment is a process used to alter the physical and sometimes chemical properties of a material through controlled heating and cooling.
• Heat treatment involves heating a material to a specific temperature, holding it at that temperature for a certain amount of time, and then cooling it at a controlled rate.

• The purpose of heat treatment is to improve the material's hardness, strength, toughness, ductility, and oth...read more
Answered by AI
Add your answer

Q1. What is the magnetic particle test procedure
Ans. 
Magnetic particle test is a non-destructive testing method used to detect surface and near-surface flaws in ferromagnetic materials.
• The test involves magnetizing the component, applying magnetic particles to the surface, and inspecting for indications of defects.

• Defects such as cracks, laps, seams, and inclusions can be detected using this method.

• The test can be performed using either dry magnetic powder or wet fluores...read more
Answered by AI
Add your answer

Q1. What is the chip relieving angle
Ans. 
The chip relieving angle is the angle between the cutting edge of a tool and the surface of the workpiece.
• The chip relieving angle is important in machining operations as it affects the chip formation and evacuation.

• A larger chip relieving angle allows for better chip flow and reduces the chances of chip clogging or built-up edge.

• Different materials and cutting conditions may require different chip relieving angles for...read more
Answered by AI
View 2 more answers
Q2. What is the pitch of the thread
Ans. 
The pitch of a thread refers to the distance between adjacent threads on a screw or bolt.
• Pitch is typically measured in millimeters or inches.

• It determines the tightness or looseness of the fit between the screw and the threaded hole.

• A finer pitch means more threads per unit length, resulting in a tighter fit.

• A coarser pitch means fewer threads per unit length, resulting in a looser fit.

• For example, a screw with a pitc...read more
Answered by AI
View 1 more answer
Q3. What is the lip angle on drill bit
Ans. 
The lip angle on a drill bit refers to the angle formed between the cutting edge of the drill bit and the surface of the material being drilled.
• The lip angle affects the cutting action and chip formation during drilling.

• A smaller lip angle provides a more aggressive cutting action, but may cause the drill bit to wander or chatter.

• A larger lip angle provides a more controlled cutting action, but may generate more heat.

• C...read more
Answered by AI
View 2 more answers
Q4. How do calculate pitch circle dia. in spur gear
Ans. 
Pitch circle diameter in spur gear is calculated using the formula: PCD = (Number of teeth / Diametral pitch)
• The pitch circle diameter (PCD) is the diameter of the imaginary circle that passes through the center of the gear teeth.

• To calculate the PCD, you need to know the number of teeth on the gear and the diametral pitch.

• The formula to calculate PCD is PCD = (Number of teeth / Diametral pitch).

• For example, if a gear ...read more
Answered by AI
View 1 more answer
Q5. What is the formula for Feed calculation
Ans. 
The formula for feed calculation in mechanical engineering is Feed = (Number of teeth on the cutter x RPM x Chip load)
• Feed is a crucial parameter in machining operations

• It determines the rate at which the cutting tool advances into the workpiece

• The formula for feed calculation involves the number of teeth on the cutter, RPM (revolutions per minute), and chip load

• Chip load refers to the thickness of the material removed...read more
Answered by AI
View 1 more answer
Q6. Why forged steel is used for machine parts
Ans. 
Forged steel is used for machine parts due to its superior strength, durability, and resistance to wear and tear.
• Forged steel has a higher tensile strength compared to other materials, making it ideal for heavy-duty machine parts.

• It has excellent toughness and impact resistance, ensuring the parts can withstand high loads and vibrations.

• Forged steel is highly resistant to wear and tear, reducing the need for frequent r...read more
Answered by AI
View 1 more answer
Q7. What was the distortion during welding
Ans. 
Distortion during welding refers to the changes in shape or dimensions of the welded material caused by the heat and cooling processes.
• Distortion occurs due to the expansion and contraction of the material during welding.

• It can result in changes in the straightness, flatness, or angularity of the welded components.

• Distortion can be minimized by using proper welding techniques, such as preheating, controlling heat input...read more
Answered by AI
View 1 more answer
Q8. What was the remidy to avoid dostortion
Ans. 
To avoid distortion, proper design, material selection, and manufacturing processes should be followed.
• Use appropriate design techniques to minimize stress concentrations.

• Select materials with suitable mechanical properties to withstand applied loads.

• Ensure proper heat treatment and surface finishing to reduce residual stresses.

• Implement accurate manufacturing processes to maintain dimensional stability.

• Perform regular...read more
Answered by AI
View 1 more answer
Q9. What measure u adopt while doing gas cutting of steel to avoid distortion.
Ans. 
To avoid distortion while gas cutting steel, measures like preheating, using proper cutting speed, and cooling are adopted.
• Preheating the steel before cutting to reduce thermal shock

• Using proper cutting speed to prevent excessive heat buildup

• Cooling the steel after cutting to prevent warping

• Using a jig or fixture to hold the steel in place during cutting

• Using a smaller cutting torch tip to reduce heat input

• Using a back...read more
Answered by AI
Add your answer
Q10. Distortion took place on longer products, to avoid this do stich cutting instead of doing continuos gas cutting. After cooling/ normal temp. then remove/cut the stiches. Sothat it won't b distorted.
Ans. 
Stitch cutting can be used to prevent distortion on longer products by cutting them into smaller sections and then removing the stitches after cooling.
• Distortion can occur on longer products during gas cutting.

• Stitch cutting involves cutting the product into smaller sections using stitches.

• After cooling or reaching normal temperature, the stitches are removed.

• This method helps to prevent distortion on the product.

• Examp...read more
Answered by AI
View 1 more answer