Filter interviews by
posted on 10 Oct 2019
I was interviewed in Sep 2019.
I am a recent graduate with a degree in Mechanical Engineering and a passion for problem-solving and innovation.
Recent graduate with a degree in Mechanical Engineering
Passionate about problem-solving and innovation
Strong communication and teamwork skills
Experience with CAD software and project management
I have worked in Goa for 2 years as a software engineer in a tech company.
Developed and maintained software applications for clients
Collaborated with cross-functional teams to deliver projects on time
Participated in client meetings to gather requirements and provide updates
Attended tech conferences and workshops to stay updated with latest trends
I have faced problems like slag formation, furnace lining wear, and temperature control in blast furnace.
Slag formation causing blockages in the furnace
Furnace lining wear leading to leaks and reduced efficiency
Temperature control issues affecting the quality of the output
Used slag control agents to prevent blockages
Regular maintenance and repair of furnace lining
Implemented advanced temperature monitoring systems
Hot blast stoves preheat air before it enters the blast furnace. Efficiency can be improved by using waste heat recovery systems.
Hot blast stoves preheat air to around 1200°C before it enters the blast furnace
Efficiency can be improved by using waste heat recovery systems to recover heat from the stove exhaust gases
Insulating the stove walls and using high-quality refractory materials can also improve efficiency
Regular...
Hanging and slipping are two common issues in technical work. Learn how to tackle them effectively.
Hanging refers to a situation where a program or system stops responding or freezes.
Slipping refers to a situation where a program or system runs slower than expected.
To tackle hanging, try restarting the program or system, or checking for any updates or patches.
To tackle slipping, try optimizing the program or system, or
Steps to take when furnace is getting chilled
Check the fuel supply and adjust if necessary
Inspect the burners and clean them if needed
Check the thermostat and adjust the temperature settings
Inspect the air filters and replace if dirty
Check the insulation and repair any leaks
Inspect the ductwork and repair any leaks
Check the blower motor and lubricate if needed
I have been involved in various projects related to software development and implementation.
Led a team in developing a new mobile application for tracking fitness goals
Implemented a new CRM system to streamline customer interactions
Collaborated with cross-functional teams to upgrade the company's website for better user experience
Yes, there have been production losses due to workers strikes in the past. To tackle this issue, we implement effective communication strategies, address worker grievances promptly, and have contingency plans in place.
Implement effective communication strategies to prevent misunderstandings and address worker grievances promptly
Develop strong relationships with labor unions to ensure smooth negotiations and prevent str...
I am interested in gaining diverse experience and skills in different industries to broaden my knowledge and expertise.
I believe working in different industries will provide me with a well-rounded perspective and skill set.
I am eager to learn new technologies and processes that may not be available in the iron making industry.
I am excited about the opportunity to work in a dynamic and innovative environment like this c
Efficiency of hot blast stoves can be increased by optimizing combustion, improving insulation, and reducing heat losses.
Optimize combustion by using high-quality fuel and maintaining proper air-to-fuel ratio
Improve insulation by using high-temperature refractory materials and insulating the stove walls
Reduce heat losses by minimizing air leaks and using heat recovery systems
Regular maintenance and cleaning of the stov...
We sell blast furnace slag as a byproduct to construction companies at market rates.
Blast furnace slag is a byproduct of the steel-making process.
We sell it to construction companies for use in cement and concrete production.
The cost varies depending on market rates and demand.
We ensure that the slag meets all necessary quality standards before selling it.
We also explore potential new markets for the slag to maximize i
Despite the current loss, I believe in the potential of the iron and steel sector to bounce back and contribute to the economy.
I am passionate about the technical aspects of the iron and steel sector
I have researched the current market trends and believe that with the right strategies, the sector can recover
I am excited about the opportunity to be a part of the solution and contribute to the growth of the sector
I am co...
The blending mixture of coal for Met coke making depends on the quality of coal and the desired coke properties.
The blending mixture is determined by the quality of coal available.
The desired coke properties also play a role in determining the blending mixture.
The blending mixture typically includes a combination of coking coal, anthracite coal, and other additives.
The ratio of each component in the blending mixture ca...
Seeking new challenges and growth opportunities
Desire for career advancement
Looking for new challenges
Seeking opportunities for professional growth
Company restructuring or downsizing
Relocation to a new area
Top trending discussions
posted on 7 Dec 2016
I applied via Campus Placement and was interviewed in Dec 2016. There were 6 interview rounds.
Distillation column separates components based on boiling points while absorption column separates based on solubility.
Distillation column separates components based on their boiling points while absorption column separates based on their solubility in a particular solvent.
Distillation column is used when the boiling points of the components to be separated are significantly different.
Absorption column is used when the...
Heat transfer rate through walls of different conductivity and of the same area of heat transfer and length
Heat transfer rate is directly proportional to the thermal conductivity of the material
Thermal conductivity is the ability of a material to conduct heat
Materials with high thermal conductivity transfer heat faster than those with low thermal conductivity
Heat transfer rate can be calculated using Fourier's law of h...
posted on 12 Sep 2020
I applied via Company Website and was interviewed before Sep 2019. There was 1 interview round.
posted on 19 Sep 2023
I applied via Campus Placement and was interviewed before Sep 2022. There was 1 interview round.
There are three laws of thermodynamics.
There are three laws of thermodynamics: the zeroth law, the first law, and the second law.
The zeroth law states that if two systems are in thermal equilibrium with a third system, they are in thermal equilibrium with each other.
The first law states that energy cannot be created or destroyed, only transferred or converted.
The second law states that the entropy of an isolated system
Yes, I have knowledge of material science which involves the study of properties and applications of materials.
I have studied the structure, properties, processing, and performance of materials.
I am familiar with various types of materials such as metals, ceramics, polymers, and composites.
I understand how material properties can be tailored to meet specific requirements in different applications.
I have practical exper...
Grain boundaries are interfaces between grains in a polycrystalline material, affecting material properties.
Grain boundaries are regions where the crystal structure changes orientation.
They can affect material properties such as strength, conductivity, and corrosion resistance.
Grain boundaries can be classified as low-angle or high-angle boundaries based on the misorientation angle.
Examples include the use of grain bou...
posted on 21 Sep 2022
I applied via Walk-in and was interviewed in Aug 2022. There were 2 interview rounds.
Tolerance is the permissible limit of variation in a dimension or property of a material. Types of gears include spur, helical, bevel, worm, etc.
Tolerance is the difference between the maximum and minimum limit of a dimension or property.
It is important in manufacturing to ensure proper fit and function of parts.
Types of gears include spur, helical, bevel, worm, rack and pinion, etc.
Spur gears are the most common type ...
I applied via Referral and was interviewed before Jan 2019. There were 6 interview rounds.
posted on 8 Sep 2021
I applied via Campus Placement and was interviewed before Sep 2020. There were 3 interview rounds.
Steel is a metal alloy made primarily of iron and carbon.
Steel is known for its strength, durability, and versatility.
It is used in construction, manufacturing, transportation, and many other industries.
Different types of steel can be created by varying the amount of carbon and other elements added to the alloy.
Stainless steel, for example, contains chromium and nickel to resist corrosion.
Steel can also be recycled, ma
The Steel Making Process and Prerequisites for Making a Steel Water Bottle
The steel making process involves converting iron ore into steel through various stages such as smelting, refining, and casting
Prerequisites for making a steel water bottle include obtaining high-quality steel, designing the bottle, and manufacturing it through processes such as stamping and welding
The Hall Herault process is a method for produci...
I applied via Naukri.com and was interviewed in May 2021. There were 3 interview rounds.
Some of the top questions asked at the Vizag Steel Management Trainee - Technical interview -
Senior Manager
107
salaries
| ₹0 L/yr - ₹0 L/yr |
Manager
58
salaries
| ₹0 L/yr - ₹0 L/yr |
Deputy Manager
58
salaries
| ₹0 L/yr - ₹0 L/yr |
Graduate Apprenticeship Trainee
48
salaries
| ₹0 L/yr - ₹0 L/yr |
Deputy General Manager
42
salaries
| ₹0 L/yr - ₹0 L/yr |
Tata Steel
JSW Steel
Steel Authority Of India
ArcelorMittal Nippon Steel