Filter interviews by
The bill of material for a 1 KM 11 KV line includes various components such as conductors, insulators, transformers, and poles.
Conductors: Copper or aluminum cables used to transmit electricity.
Insulators: Materials like porcelain or polymer used to support and isolate the conductors.
Transformers: Devices used to step up or step down the voltage.
Poles: Structures to support the conductors and maintain their position.
Ot...
The bill of material for a 1 KM AB cable line includes various components.
The cable itself
Insulators
Connectors
Poles or towers
Grounding equipment
Hardware such as bolts and clamps
Tools for installation
Safety equipment
Transportation costs
Labor costs
The bill of material for a 1KM underground line with 33KV, 11KV, and LT lines.
The bill of material should include all necessary components for the underground line.
Components may include cables, transformers, switchgear, and other electrical equipment.
The quantity of each component should be specified in the bill of material.
The bill of material should also include any necessary accessories such as clamps, connectors,
Testing and commissioning of RMU and relay setting is a crucial aspect of project engineering.
Testing and commissioning of RMU involves verifying the functionality of the switchgear and ensuring it is safe for operation.
Relay setting involves configuring the protection relays to ensure they operate correctly in the event of a fault.
Testing and commissioning should be carried out in accordance with relevant standards an...
A lightning arrestor is a device used to protect electrical equipment from lightning strikes.
It is also known as a surge arrester or lightning diverter.
It works by providing a low-impedance path for lightning current to flow to the ground.
It is commonly used in power distribution systems, telecommunication networks, and buildings.
Examples include metal oxide varistors, gas discharge tubes, and carbon block arrestors.
Discharge rods are grounding devices used to discharge static electricity from equipment or machinery.
Also known as grounding rods or earthing rods
Typically made of copper or aluminum
Used in industries such as oil and gas, chemical, and manufacturing
Prevents damage to equipment and potential safety hazards
Example: Discharge rods are commonly used in refineries to prevent explosions caused by static electricity buildup.
The size of conductors and cables is an important factor in determining their electrical properties and performance.
The size of a conductor is determined by its cross-sectional area, which affects its resistance and current-carrying capacity.
Cable size is determined by the current it needs to carry and the distance it needs to travel.
Larger conductors and cables can carry more current and have lower resistance, but may...
GTP is a protocol used in cellular communication. MQP and FQP are not commonly used acronyms.
GTP stands for GPRS Tunnelling Protocol
It is used in cellular communication to allow data transfer between different networks
MQP and FQP are not commonly used acronyms and may refer to specific organizations or products
HDD machine is a drilling machine used for horizontal directional drilling.
HDD stands for Horizontal Directional Drilling
It is used for underground drilling without disturbing the surface
It is commonly used for laying pipelines, cables, and conduits
The machine uses a drill stem and a drilling fluid to bore through the ground
It requires skilled operators and engineers to operate and plan the drilling process
Jointing of cables and conductors is a crucial aspect of project engineering.
Jointing involves connecting two or more cables or conductors to ensure continuity of electrical flow.
Various methods of jointing include crimping, soldering, and welding.
Factors such as the type of cable, voltage, and current capacity must be considered when selecting a jointing method.
Proper insulation and sealing of joints is essential to p...
Experienced project engineer with a background in civil engineering and a passion for problem-solving and team collaboration.
Bachelor's degree in Civil Engineering
5+ years of experience in project management
Proficient in AutoCAD and project management software
Strong communication and leadership skills
Successfully led a team in completing a major infrastructure project on time and within budget
What people are saying about Vindhya Telelinks
I applied via Walk-in and was interviewed in Nov 2024. There was 1 interview round.
Vindhya Telelinks interview questions for popular designations
I applied via Newspaper Ad and was interviewed in Jun 2024. There were 2 interview rounds.
Electrical-related questions and general knowledge.
Get interview-ready with Top Vindhya Telelinks Interview Questions
Description of work involves detailing the scope, tasks, and requirements of a project or job.
Provide a comprehensive breakdown of the project or job tasks
Include specific requirements such as materials, labor, and equipment needed
Detail the timeline and milestones for completion
Communicate with stakeholders to ensure understanding and alignment
I was responsible for assisting in the design and construction of civil engineering projects.
Assisted in the design and drafting of structural plans
Performed site visits and inspections to ensure compliance with regulations
Collaborated with project managers and contractors to coordinate project timelines
Prepared cost estimates and material quantities for project budgets
I applied via Walk-in and was interviewed in Mar 2024. There were 2 interview rounds.
I applied via Company Website and was interviewed in Sep 2023. There were 3 interview rounds.
The software commonly used for VFD programming is typically provided by the manufacturer of the VFD.
The software provided by the VFD manufacturer is usually specific to their brand and model of VFD
Common software for VFD programming includes Siemens Starter, ABB Drive Composer, and Schneider Electric SoMove
These software programs allow technicians to configure parameters, monitor performance, and troubleshoot issues wi
A multi-purpose SCADA system can be created by designing a flexible and customizable interface with the ability to monitor and control various processes.
Identify the different processes and systems that need to be monitored and controlled
Design a user-friendly interface that allows for customization and flexibility
Implement communication protocols to connect the SCADA system to various devices and sensors
Include featur...
I applied via Walk-in and was interviewed in Sep 2023. There were 3 interview rounds.
I applied via Walk-in and was interviewed before Aug 2023. There was 1 interview round.
Experienced retail professional with strong leadership skills and a proven track record of driving sales and exceeding targets.
Over 5 years of experience in retail management
Successfully led a team to achieve a 20% increase in sales within one year
Skilled in inventory management and merchandising
Strong communication and customer service skills
Proficient in analyzing sales data and implementing strategies for growth
I have 5 years of experience as a Store Manager at XYZ Company, where I successfully implemented inventory management systems and increased sales by 20%.
Managed store operations including inventory control, staff management, and customer service
Implemented new inventory management system resulting in more accurate stock levels
Increased sales by 20% through strategic marketing campaigns and promotions
Trained and supervi...
The duration of Vindhya Telelinks interview process can vary, but typically it takes about less than 2 weeks to complete.
based on 47 interviews
Interview experience
based on 462 reviews
Rating in categories
Project Engineer
188
salaries
| ₹0 L/yr - ₹0 L/yr |
Senior Engineer
142
salaries
| ₹0 L/yr - ₹0 L/yr |
Assistant Manager
132
salaries
| ₹0 L/yr - ₹0 L/yr |
Assistant Engineer
56
salaries
| ₹0 L/yr - ₹0 L/yr |
Deputy Manager
50
salaries
| ₹0 L/yr - ₹0 L/yr |
Sterlite Technologies
Finolex Cables
Polycab Wires
KEI Industries