Veer-O-- Metals Interview Questions, Process, and Tips

Q1. Introduce yourself
Ans. 
I am a seasoned facility manager with over 10 years of experience in overseeing building operations and maintenance.
• Over 10 years of experience in facility management

• Skilled in overseeing building operations and maintenance

• Strong background in managing facility budgets and projects
Answered by AI
Add your answer
Q2. Why you relieve your before company
Ans. 
I left my previous company to pursue new opportunities and challenges.
• Seeking career growth and advancement

• Desire for new challenges and experiences

• Better work-life balance

• Company restructuring or downsizing

• Relocation to a new area

• Conflict with management or colleagues
Answered by AI
Add your answer

Q1. What is OHMS Law and formula
Ans. 
OHM's Law states the relationship between voltage, current, and resistance in an electrical circuit.
• OHM's Law formula: V = I * R (Voltage = Current * Resistance)

• V = voltage (measured in volts)

• I = current (measured in amperes)

• R = resistance (measured in ohms)

• Example: If a circuit has a voltage of 12V and a resistance of 4 ohms, the current flowing through the circuit would be 3A (I = V / R = 12V / 4 ohms = 3A)
Answered by AI
Add your answer
Q2. Deference between AC & DC
Ans. 
AC stands for alternating current, which changes direction periodically. DC stands for direct current, which flows in one direction.
• AC is commonly used in household appliances and power distribution systems.

• DC is commonly used in batteries and electronic devices.

• AC can be easily converted to different voltages using transformers.

• DC is more efficient for long-distance power transmission.

• Examples of AC devices include re...read more
Answered by AI
Add your answer
Q3. Types of circuit breaker what are they
Ans. 
Types of circuit breakers include thermal-magnetic, magnetic, and hydraulic-magnetic.
• Thermal-magnetic circuit breakers combine thermal and magnetic mechanisms to provide overload and short circuit protection.

• Magnetic circuit breakers use a solenoid to trip the breaker when a fault is detected.

• Hydraulic-magnetic circuit breakers use a hydraulic delay to provide precise protection against overloads and short circuits.
Answered by AI
Add your answer

Q1. Have you prepared CAPA?
Ans. 
Yes, I have prepared CAPA (Corrective and Preventive Action) reports in my previous roles.
• Yes, I have prepared CAPA reports to address quality issues and prevent their recurrence.

• I have experience in conducting root cause analysis to identify the underlying issues.

• I have implemented corrective actions to address immediate concerns and preventive actions to avoid future issues.

• I have also monitored the effectiveness of
Answered by AI
Add your answer
Q2. What is APQP and their application
Ans. 
APQP stands for Advanced Product Quality Planning. It is a structured method for defining and establishing the steps necessary to ensure that a product satisfies the customer.
• APQP is a quality framework used in the automotive industry to ensure that products meet customer requirements.

• It involves a series of phases including planning, product design and development, process design and development, product and process v...read more
Answered by AI
Add your answer
Q3. 7QC Tools and their application
Ans. 
7QC Tools are a set of tools used for quality control and improvement in manufacturing processes.
• Check Sheet: Used to collect and analyze data, such as defects in a product.

• Histogram: Shows the frequency distribution of a set of data.

• Pareto Chart: Helps identify the most significant factors contributing to a problem.

• Cause and Effect Diagram (Fishbone Diagram): Used to identify and analyze potential causes of a problem.

• ...read more
Answered by AI
Add your answer
Q4. What all are the PPAP Documents?
Ans. 
PPAP documents include documents like control plan, FMEA, measurement system analysis, etc.
• Control Plan

• FMEA (Failure Mode and Effects Analysis)

• Measurement System Analysis

• Part Submission Warrant

• Process Flow Diagram

• Appearance Approval Report
Answered by AI
Add your answer
Q5. Acceptance criteria for SPC&MSA
Ans. 
Acceptance criteria for SPC&MSA involves setting specific requirements for statistical process control and measurement system analysis.
• Acceptance criteria for SPC should include specifications for control limits, process stability, and capability indices.

• Acceptance criteria for MSA should include requirements for bias, linearity, stability, repeatability, and reproducibility.

• Examples of acceptance criteria for SPC coul...read more
Answered by AI
Add your answer
Q6. How you're declaring the severity in PFMEA
Ans. 
Severity in PFMEA is declared based on the potential impact of a failure mode on the overall process or product.
• Severity is typically rated on a scale from 1 to 10, with 1 being the least severe and 10 being the most severe.

• Consider the consequences of a failure mode on customer safety, regulatory compliance, product functionality, and overall process performance.

• Examples of high severity failure modes include those th...read more
Answered by AI
Add your answer

On recent topic like the Indian election

It was CRM development assignment and it was mern stack application

Good question for aptitude test

Q1. Technical test also required
Add your answer
Q2. Some technical and programming related questions
Add your answer