Upload Button Icon Add office photos

VE Commercial Vehicles

Compare button icon Compare button icon Compare

Filter interviews by

VE Commercial Vehicles Functional Trainee Interview Questions and Answers

Updated 12 Feb 2023

VE Commercial Vehicles Functional Trainee Interview Experiences

1 interview found

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed in Jan 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Group Discussion 

They had give us some trending topics like automation, ev etc.
So prepared well have confident during the GD.

Round 3 - One-on-one 

(5 Questions)

  • Q1. Tell us about your self
  • Q2. Some HR questions that were basic only
  • Q3. Which project you have done?
  • Q4. Some Basic technical Questions.
  • Ans. The technical questions are not compulsorily asked with everyone it depends on your project and interviewer also.
  • Answered Anonymously
  • Q5. Are you ready for relocation?
  • Ans. Yes, I am absolutely ready for relocation.
  • Answered Anonymously

Interview Preparation Tips

Interview preparation tips for other job seekers - Introduce yourself with proper etiquette.
Do not rush while giving the answers.
Explain properly and clearly.

Interview questions from similar companies

I applied via Walk-in and was interviewed before May 2021. There was 1 interview round.

Round 1 - One-on-one 

(2 Questions)

  • Q1. Technical interview
  • Q2. Core related skills and technical skill

Interview Preparation Tips

Interview preparation tips for other job seekers - Dress code is very important ,timing

Interview Preparation Tips

Round: aptitude test
Experience: The aptitude test consisted of verbal, analytical and numerical questions with sufficient time to answer the questions.

Round: Technical test
Experience: The technical test contained questions from almost all the compulsory courses that you may have studied over the past four-five years, mostly conceptual though but there were some numerical questions as well.

Round: Group Discussion
Experience: There was a group discussion on the topic ‘Is quality a myth in India? ‘ to eliminate a few students and the rest were selected for the final interviews.

Round: technical interview
Experience: Interview lasted for about 25-30 minutes. They started by asking about my interests and backgrounds and then came directly into questions related to my areas of interests. They asked questions about torque transmission through a shaft, I-beams, stress-strain and buckling and a little background about my thesis followed by one basic question related to it. The final 10-12 minutes were spent in discussing the questions that I had asked the interviewers and it also helped in lightening the mood, so I would suggest be ready to ask the interviewer a few questions to show that you are genuinely interested
During the interview questions were asked mostly from my areas of interests and a little about my thesis and internships. But it is important to know one or two courses very thoroughly.


General Tips: Do’s and Don’ts :
● Do not take GD’s lightly, I ignored it till the very last moment and did my first GD on the night before the actual GD. It is a shortlisting criteria for many mechanical engineering core companies and you wouldn’t want to lose out there.
● Read about your thesis and internships properly. Many of your interviews would revolve around that only.
● Select one or two major courses and prepare them thoroughly, you may be asked about the courses that you liked at IITK followed by some questions related to it.
● Practice explaining your projects and HR questions with someone.
● Get to know a little about the company before the interview. You may drop that information somewhere during the interview to show your interest. Also be ready to ask a question at the end.
● Don’t copy answers to HR questions from the internet, write your own and try to remember the key points.
● Don’t lose heart if you are not shortlisted or not selected. There are a lot of other options.

College Name: IIT Kanpur

Interview Questionnaire 

2 Questions

  • Q1. 5 min for HR
  • Q2. 10 min for technical

Interview Preparation Tips

Round: Test
Experience: There was no negative marking in test(but our seniors got the paper with negative marking so nothing can be predicted for future) but there was time limit so u have to maintain ur speed,once u move forward for next question u can not go back to previous question so u have to be careful which question u have to skip.questions were not very easy nor they were tough,mathematics questions were from 11 12 class not from the B.Tech course.
Tips: for aptitude questions plz go through all types of patterns(work,wages,profit loss,capital interest,principal interest,average.speed,distance,time ), u can get them in MADE EASY aptitude book,for technical go through all the subjects(machines,power system,analog,digital,instrumentation,networks,control system)because there was atleast one question from each subject although they were easy ,if u r preparing for GATE u just need remember the basic ,the can be solved on finger tips
Duration: 2 HR minutes
Total Questions: 120

Round: Group Discussion
Experience: topic was very easy so everyone was ready with the points,boys were speaking with dominating voice,u have to be very careful to get a chance to speak
Tips: search common GD topics on net and write ur own points for them, go through the GD on net so u can get an idea how to start the topic or else join any of the coaching for GD,dont speak much but when u speak be confident and speak simple language don't use complicated words
Duration: 15 minutes

Round: Other Interview
Experience: they asked me to speak about myself for 5 min they were very cool,they were continuously looking in my CV and questioning about what I have written in it(about my sport,schooling,brother,my family,childhood)for technical they asked me about sensors and as an ee student which instrument I will be using for measuring fuel level in the automobiles,they were very much impressed by my written test (as they said to me,so try to do it well)  they were very much cool and smiling all the time,with their body language I was able to make it out that they will select me
Tips: if u r a girl from non mechanical branch then ur chances of getting selected is quite more as compared with the boys of non mechanical branch(provided u also give them answer for their question confidently with good body language   ) , for boys if u want to clear ur interview prepare thoroughly with ur technical subjects

General Tips: give the written test of consultancy companies so u can have an idea of aptitude questions,if u clear the test of those companies and get selected for GD give 100% in the GD,if u get selected for next round interview and u dont want to join the company say no to them in the interview,but plz if u dont want to join a company just dont leave it because u want to wait for ur dream company ,the above trick will help u to get experience and gain confidence but be careful
Skill Tips: go through the campus placement papers on net
Skills: alertness, speed, acuracy
College Name: NIT BHOPAL
Motivation: My brother is a pass from MANIT 2011 mechanical batch,he wanted to join tata motors but as he had a drop after his 12th class he was not allowed to sit for the written,when I said him about tata motors vist to MANIT in 2014 he just said "KUCH BHI KAR PAR TATA MOTOR ME JANA HI HAI TUZE HAAT SE NAHI JANI CHAHIYE YE COMPANY"
Funny Moments: when i got selected for tata motors i called my brother and gave him the news he said CHAL MERA SAPNA TUZME DEKHLIYA MEINEi was in the hostel and i was called to the admin to collect my offer letter and sign a copy of that and them back i was so much excited that i took my offer letter and was busy at talking the HRs were looking at me and laughing then the TPO came and said ANJALI ab de bhi de sign karke unhe

Interview Questionnaire 

11 Questions

  • Q1. Questions about FEM
  • Q2. Why Ashok Leyland and what will you do in our company
  • Ans. 

    I am interested in Ashok Leyland because of its reputation in the industry. I believe my skills in management and leadership can contribute to the company's growth.

    • Ashok Leyland has a strong presence in the commercial vehicle industry

    • The company has a reputation for innovation and quality

    • I am impressed by the company's commitment to sustainability and social responsibility

    • As Deputy Manager, I will use my skills in mana...

  • Answered by AI
  • Q3. Basic electric drives like vector control of IM drives and HYBUS of Ashok Leyland
  • Q4. Thermodynamics
  • Q5. Fluid mechanics
  • Q6. Aerodynamics degree of freedom
  • Ans. 

    Aerodynamics degree of freedom refers to the number of independent variables required to describe the motion of an object in a fluid.

    • Aerodynamics degree of freedom is determined by the number of independent variables required to describe the motion of an object in a fluid.

    • The degree of freedom is dependent on the number of dimensions in which the object is moving.

    • For example, a two-dimensional object moving in a fluid ...

  • Answered by AI
  • Q7. Bending, Coupling during flutter
  • Q8. Engine based questions
  • Q9. CFD related to SMAC and why we use staggered grid?
  • Q10. Nusselt number and prandtl number passions
  • Q11. Being AE why one choose automobile industry?
  • Ans. 

    I chose the automobile industry because of my passion for cars and the opportunity to work with advanced technology.

    • Passion for cars and automobiles

    • Opportunity to work with advanced technology

    • Fascination with the industry's constant innovation and development

    • Desire to be a part of a dynamic and exciting field

    • Interest in the business and marketing aspects of the industry

  • Answered by AI

Interview Preparation Tips

Round: Test
Experience: Topics: Basics, diagrams, analog  
Electrical engineering: Related to: a)Circuit theory b)Measurement c)machine d)power electronics
Graphic aptitude, find out the missing number in series, geometry
Banking type exam
11&12th standard questions
Duration: 90 minutes

General Tips: 1. Asking mainly design based questions & FEM
2. Basic CFD
3. Prepare well about company profile
4. Good knowledge of advanced electric drives, power electronics
5. Know projects very well in your CV and basic courses
6. Score maximum in written
7. Interview not a big thing and less weight age
8. In aptitude test questions are simple and easy but time is very short so here the speed matters.
College Name: IIT KANPUR

I applied via Recruitment Consultant

Interview Questionnaire 

1 Question

  • Q1. Working experience Financial aspects Future plans

Interview Preparation Tips

Round: Test
Experience: Aptitude test

Round: CFO interview
Experience: Detailed Ind AS

General Tips: Stay clear about the concepts/technical knowledge
Don't hesitate stay confident and reply with positive attitude
Skills: Communication, Body Language, Problem Solving, Decision Making Skills
Duration: 1-3 Months

I applied via Campus Placement and was interviewed before Nov 2020. There were 6 interview rounds.

Interview Questionnaire 

6 Questions

  • Q1. 1. Few questions about basic knowledge.
  • Q2. 2. Questions about my projects done. How can automation help us, what projects did you do? Explain one of them in detail
  • Q3. 3. Being an EC engineer, why do you want to join an Automobile company? How can you prove yourself in this field and what do you expect your role to be here?
  • Q4. Suggest some ideas of automation for an automobile company.
  • Ans. 

    Automation can improve efficiency and quality in an automobile company.

    • Automated assembly lines for faster production

    • Robotic arms for precision welding and painting

    • Automated quality control systems to detect defects

    • Autonomous vehicles for transportation within the factory

    • Automated inventory management for efficient supply chain

    • AI-powered predictive maintenance for reducing downtime

  • Answered by AI
  • Q5. Few questions about basic Electronics and projects done in this field.
  • Q6. Are you ready to relocate?

Interview Preparation Tips

Interview preparation tips for other job seekers - 1. Be confident and smart while answering the questions.
2. Never try to make up a story in order to back a topic. Interviewers are way smarter than you.
3. Explain the things slowly and briefly, cover only the important topics. Detail only when asked.
4. Trh not to stammer while answering the questions and be honest.
5.Show the interest in the job and the company you are being interviewed for.
6. Try to gain some basic knowledge about the company sitting for before the interview. They may ask you a few detail about their company.
7. At last, be positive and hope for best!

Skills evaluated in this interview

Interview experience
4
Good
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via AmbitionBox and was interviewed in Aug 2023. There were 3 interview rounds.

Round 1 - Technical 

(3 Questions)

  • Q1. Why mach carck in ingot welding
  • Ans. 

    Cracks can occur in ingot welding due to various factors.

    • Inconsistent heating and cooling rates can lead to cracks in the weld.

    • Improper preparation of the welding surface can result in cracks.

    • Excessive stress or strain during the welding process can cause cracks.

    • Inadequate filler material or improper welding technique can contribute to crack formation.

    • Examples of crack types include hot cracks, cold cracks, and solidif

  • Answered by AI
  • Q2. Less pressure nnd morv current
  • Q3. Why leak coming after collar brazing. Collar brazing. Welding is an multi disciplinary subject. eliminate one by one
  • Ans. 

    Leak after collar brazing can occur due to various factors in welding process.

    • Possible reasons for leak after collar brazing include improper joint preparation, inadequate heat control, poor quality brazing material, or insufficient brazing technique.

    • Improper joint preparation can lead to gaps or misalignment, causing leaks.

    • Inadequate heat control may result in incomplete brazing, leading to weak joints and potential l...

  • Answered by AI
Round 2 - Assignment 

Productivity improvement

Round 3 - Aptitude Test 

Mig vs welding engineer. In mig wire feed is added. In laser welding wire not noted wire consumption cost god

Interview Preparation Tips

Interview preparation tips for other job seekers - Relevant question regat in on fabrication shop and daiy routine of shop floop activities
Interview experience
5
Excellent
Difficulty level
Hard
Process Duration
2-4 weeks
Result
Selected Selected

I applied via LinkedIn and was interviewed before May 2023. There were 3 interview rounds.

Round 1 - Technical 

(2 Questions)

  • Q1. Basic automatic
  • Q2. Related to sensor
Round 2 - One-on-one 

(2 Questions)

  • Q1. Business related
  • Q2. Service business
Round 3 - HR 

(1 Question)

  • Q1. Salary related & growth related

Interview Preparation Tips

Interview preparation tips for other job seekers - Interview will be challenging

I applied via Referral and was interviewed before Mar 2021. There were 3 interview rounds.

Round 1 - Technical 

(2 Questions)

  • Q1. Related to Automobile some technical quest and process related
  • Q2. Based on my experience I answered and the questions for which I didn't know the answer I replied I need to learn or I have more interest in knowing.
Round 2 - Assignment 

Some topics in service manual.

Round 3 - One-on-one 

(1 Question)

  • Q1. Expected salary and negotiation

Interview Preparation Tips

Topics to prepare for Royal Enfield Deputy Manager interview:
  • Automobile Engineering
  • Technical Publications
Interview preparation tips for other job seekers - Answer the questions you know and Dont use the word don't know instead say will learn or I am eager to know.

VE Commercial Vehicles Interview FAQs

How many rounds are there in VE Commercial Vehicles Functional Trainee interview?
VE Commercial Vehicles interview process usually has 3 rounds. The most common rounds in the VE Commercial Vehicles interview process are Resume Shortlist, Group Discussion and One-on-one Round.

Tell us how to improve this page.

VE Commercial Vehicles Functional Trainee Interview Process

based on 1 interview

Interview experience

5
  
Excellent
View more

Interview Questions from Similar Companies

Tata Motors Interview Questions
4.2
 • 1k Interviews
Maruti Suzuki Interview Questions
4.2
 • 597 Interviews
Bajaj Auto Interview Questions
3.9
 • 273 Interviews
Ashok Leyland Interview Questions
4.1
 • 247 Interviews
Royal Enfield Interview Questions
4.2
 • 157 Interviews
Ford Motor Interview Questions
4.3
 • 149 Interviews
Honda Interview Questions
4.2
 • 100 Interviews
View all
VE Commercial Vehicles Functional Trainee Salary
based on 21 salaries
₹3 L/yr - ₹5 L/yr
11% more than the average Functional Trainee Salary in India
View more details

VE Commercial Vehicles Functional Trainee Reviews and Ratings

based on 2 reviews

1.6/5

Rating in categories

1.6

Skill development

1.3

Work-life balance

2.7

Salary

4.0

Job security

2.6

Company culture

2.0

Promotions

1.3

Work satisfaction

Explore 2 Reviews and Ratings
Junior Manager
1.6k salaries
unlock blur

₹2.2 L/yr - ₹8.4 L/yr

Deputy Manager
1.3k salaries
unlock blur

₹6.2 L/yr - ₹19.5 L/yr

Assistant Manager
912 salaries
unlock blur

₹3.8 L/yr - ₹10.9 L/yr

Manager
245 salaries
unlock blur

₹10 L/yr - ₹28 L/yr

Channel Sales Manager
243 salaries
unlock blur

₹5.8 L/yr - ₹15.7 L/yr

Explore more salaries
Compare VE Commercial Vehicles with

Tata Motors

4.2
Compare

Maruti Suzuki

4.2
Compare

Ashok Leyland

4.1
Compare

Hyundai Motor India Limited

4.3
Compare
Did you find this page helpful?
Yes No
write
Share an Interview