Filter interviews by
I applied via Walk-in and was interviewed in Dec 2023. There were 2 interview rounds.
I applied via Naukri.com and was interviewed in Dec 2021. There were 4 interview rounds.
7 QC tools are used for quality control. Pareto chart is a tool to identify the most significant factors affecting a process.
Check sheet: Used to collect data in a structured manner
Control chart: Used to monitor process performance over time
Histogram: Used to display frequency distribution of data
Pareto chart: Used to identify the most significant factors affecting a process
Scatter diagram: Used to identify correlation...
8D is a problem-solving methodology used in quality engineering.
8D stands for 8 Disciplines.
It is used to identify, correct and prevent problems in a product or process.
It involves a team-based approach to problem-solving.
The 8 disciplines are: Team Formation, Problem Description, Interim Containment Action, Root Cause Analysis, Permanent Corrective Action, Implementation, Preventive Action, and Closure.
It helps to imp...
Defects can be categorized as functional, cosmetic, and safety-related.
Functional defects affect the product's performance or usability.
Cosmetic defects affect the product's appearance.
Safety-related defects pose a risk to the user's health or safety.
Examples of functional defects include software bugs and mechanical failures.
Examples of cosmetic defects include scratches and dents.
Examples of safety-related defects in
CAPA stands for Corrective and Preventive Action. It is a systematic approach to identify, investigate, and resolve quality issues.
CAPA is a process to address quality issues and prevent their recurrence
It involves identifying the root cause of the problem
Corrective actions are taken to address the immediate issue
Preventive actions are taken to prevent the issue from happening again
CAPA is an important part of quality
Electronics is the branch of physics and engineering that deals with the behavior and effects of electrons and with electronic devices.
Electronics involves the study of electronic components and circuits
It deals with the design, development, and testing of electronic devices
Examples of electronic devices include smartphones, computers, and televisions
A capacitor stores electrical energy, while a resistor limits the flow of electrical current.
Capacitors are used in electronic circuits to store energy and filter out noise.
Resistors are used to limit the flow of current and reduce voltage.
Capacitors are measured in farads, while resistors are measured in ohms.
Examples of capacitors include electrolytic capacitors, ceramic capacitors, and tantalum capacitors.
Examples o...
Standards for dust and dent depend on the industry and product being manufactured.
Different industries and products have different standards for dust and dent.
For example, in the electronics industry, dust particles larger than 0.5 microns are not allowed.
In the automotive industry, dents larger than a certain size are not acceptable.
Standards are set by regulatory bodies and industry associations.
Quality engineers ens
I applied via Walk-in and was interviewed before Apr 2022. There were 2 interview rounds.
I applied via Naukri.com and was interviewed in Dec 2020. There was 1 interview round.
QMS stands for Quality Management System. It is a set of policies, processes, and procedures required for planning and execution of quality control.
QMS ensures that products or services meet customer requirements and comply with regulations
It includes quality planning, quality control, quality assurance, and quality improvement
ISO 9001 is a widely recognized QMS standard
QMS is important for industries such as healthcar
To reduce rejections and reworks, implement a robust quality control system and focus on continuous improvement.
Implement a quality control system to catch defects early
Train employees on proper procedures and techniques
Conduct regular audits to identify areas for improvement
Analyze root causes of rejections and reworks to prevent future occurrences
Collaborate with suppliers to improve incoming materials quality
Utilize...
posted on 14 Nov 2021
I applied via Company Website and was interviewed in Jul 2022. There were 2 interview rounds.
Seeking new challenges and opportunities for growth.
Looking for a new challenge to further develop my skills and knowledge
Seeking opportunities for career advancement
Wanting to work in a different industry or with a different company
Relocation for personal reasons
I applied via Company Website and was interviewed in May 2021. There was 1 interview round.
Yes, ISO 9001 is a quality management system standard that focuses on meeting customer requirements and continuous improvement.
ISO 9001 is an international standard for quality management systems.
It provides a framework for organizations to ensure they consistently meet customer requirements and enhance customer satisfaction.
The standard emphasizes the importance of a process-based approach, risk-based thinking, and co...
QA focuses on preventing defects, while QC focuses on identifying and fixing defects.
QA (Quality Assurance) is a proactive process that focuses on preventing defects by establishing and maintaining standards, processes, and procedures.
QC (Quality Control) is a reactive process that focuses on identifying and fixing defects through inspections, testing, and analysis.
QA is concerned with the overall quality of the produc...
I am joining here because I am passionate about quality engineering and believe in the company's mission.
Passionate about quality engineering
Believe in the company's mission
Opportunity for professional growth
Excited to work with a talented team
Positive company culture
I applied via Naukri.com and was interviewed before Feb 2022. There were 2 interview rounds.
To handle customer issues and product failures, it is important to have effective communication, problem-solving skills, and a customer-centric approach.
Listen to the customer's concerns and empathize with their situation.
Investigate the issue thoroughly to identify the root cause of the problem.
Communicate the findings to the customer in a clear and transparent manner.
Offer solutions or alternatives to resolve the iss...
To manage product quality and achieve product yield, it is important to implement quality control measures, optimize production processes, and continuously monitor and improve product performance.
Implement quality control measures such as regular inspections, testing, and audits to ensure product quality meets the desired standards.
Optimize production processes by identifying and eliminating bottlenecks, reducing waste...
I applied via Naukri.com and was interviewed in Feb 2021. There were 7 interview rounds.
I applied via Job Portal and was interviewed before Feb 2023. There were 2 interview rounds.
Basic programs from java
I applied via Naukri.com and was interviewed in Sep 2022. There were 2 interview rounds.
Selenium Framework is used for automated testing of web applications. String manipulation programs are used to modify strings.
Selenium Framework is used to automate web application testing by simulating user actions.
String manipulation programs are used to modify strings by adding, removing, or replacing characters.
Examples of string manipulation programs include substring, replace, and split.
based on 3 interviews
Interview experience
based on 9 reviews
Rating in categories
Quality Engineer
42
salaries
| ₹0 L/yr - ₹0 L/yr |
Junior Engineer
33
salaries
| ₹0 L/yr - ₹0 L/yr |
Process Engineer
27
salaries
| ₹0 L/yr - ₹0 L/yr |
Production Engineer
25
salaries
| ₹0 L/yr - ₹0 L/yr |
Line Leader
20
salaries
| ₹0 L/yr - ₹0 L/yr |
Infosys
Wipro
TCS
HCLTech