Add office photos
Filter interviews by
TSN INFRASTRUCTURE Civil Site Execution Engineer Interview Questions, Process, and Tips
TSN INFRASTRUCTURE Civil Site Execution Engineer Interview Experiences
1 interview found
(2 Questions)
- Q1. What is steel weight
- Ans.
Steel weight refers to the mass of steel used in a structure or component.
Steel weight is typically measured in kilograms or pounds.
The weight of steel can vary depending on the type of steel used and the dimensions of the structure.
Calculating steel weight involves multiplying the volume of steel by its density.
Steel weight is an important factor in structural engineering to ensure the stability and safety of a buildi...
- Q2. What is the grade of m20 concrete
- Ans.
The grade of M20 concrete refers to the mix ratio of cement, sand, and aggregate used in the concrete mix.
M20 concrete has a mix ratio of 1:1.5:3 (1 part cement, 1.5 parts sand, 3 parts aggregate)
The compressive strength of M20 concrete is 20 MPa (Megapascals) after 28 days of curing
M20 concrete is commonly used for residential construction like foundations, slabs, and columns
(2 Questions)
- Q1. Minimum 12 mm column use in structure
- Ans.
Minimum 12 mm column is used in structures for providing adequate strength and stability.
Minimum 12 mm column is used to ensure structural integrity and load-bearing capacity.
Thicker columns are typically used in high-rise buildings or structures with heavy loads.
Reinforcement bars of 12 mm diameter or larger are commonly used in column construction.
- Q2. What density of steel
- Ans.
The density of steel varies depending on the type of steel, typically ranging from 7,750 to 8,050 kg/m^3.
The density of steel is usually around 7,750 to 8,050 kg/m^3.
Different types of steel may have slightly different densities.
Density is an important factor to consider in structural engineering and construction.
Interview Preparation Tips
Top trending discussions
Interview questions from similar companies
Selected
I was interviewed in Dec 2024.
(3 Questions)
- Q1. What is the grade of concrete
- Ans.
The grade of concrete refers to its strength and is determined by the ratio of cement to sand to aggregate.
The grade of concrete is typically denoted by a number followed by the letter 'M', such as M20, M30, etc.
The number in the grade represents the compressive strength of the concrete in megapascals (MPa) after 28 days of curing.
For example, M20 concrete has a compressive strength of 20 MPa, while M30 concrete has a ...
- Q2. What is the unit used for estimating painting work?
- Ans.
The unit used for estimating painting work is square feet.
Square feet is commonly used to estimate the amount of paint needed for a project.
Other units like square meters can also be used depending on the region.
Calculations are based on the surface area to be painted.
- Q3. What you mean by RL in survey
- Ans.
RL in survey stands for Reduced Level, which is the vertical distance between a point and a reference point.
RL is used in surveying to determine the elevation of a point relative to a known reference point.
It is commonly used in construction projects to ensure accurate leveling of structures and surfaces.
RL can be calculated using leveling instruments such as a dumpy level or a theodolite.
For example, if a benchmark ha...
(2 Questions)
- Q1. Types of cement
- Ans.
Types of cement include Portland cement, rapid-hardening cement, and sulfate-resistant cement.
Portland cement is the most common type and is used in general construction.
Rapid-hardening cement sets quickly and is often used in repair work.
Sulfate-resistant cement is used in areas where soil or water has high sulfate content.
- Q2. Size of columns
- Ans.
The size of columns in civil engineering is determined based on the load they will support and the height of the structure.
Columns are sized based on the load they will support, with larger loads requiring larger columns.
The height of the structure also plays a role in determining column size, with taller structures requiring larger columns for stability.
Factors such as material strength, column spacing, and building c...
Interview Preparation Tips
Selected
I applied via Walk-in and was interviewed in Aug 2024. There were 2 interview rounds.
General knowledge skills
(5 Questions)
- Q1. Your previous company experience
- Ans.
Worked as a Project Engineer at a construction company for 5 years.
Managed multiple civil engineering projects simultaneously
Coordinated with architects, contractors, and clients to ensure project success
Performed site inspections and quality control checks
Prepared project schedules and budgets
Resolved any issues or conflicts that arose during construction
- Q2. Asking your previous work experience
- Q3. Structure related questions
- Q4. Finishing related question
- Q5. Water proofing related question and Bbs
Interview Preparation Tips
(2 Questions)
- Q1. Explain mivan slab cycle
- Ans.
Mivan slab cycle is a construction technique using aluminum formwork for casting slabs in a repetitive cycle.
Mivan slab cycle involves setting up aluminum formwork panels for casting slabs.
The cycle includes fixing reinforcement, pouring concrete, curing, and then dismantling the formwork for reuse.
This method is efficient, cost-effective, and results in high-quality finishes.
Mivan slab cycle reduces construction time ...
- Q2. What will you ensure before concreting
- Ans.
Before concreting, ensure proper formwork, reinforcement placement, concrete mix design, and weather conditions.
Check formwork for proper alignment and stability
Ensure reinforcement bars are correctly placed as per design
Verify concrete mix design meets project specifications
Monitor weather conditions to prevent issues like rain or extreme temperatures affecting the concrete
(1 Question)
- Q1. Expected salary if selected
- Ans.
My expected salary is based on my qualifications, experience, and the industry standards.
I am looking for a competitive salary that reflects my skills and experience in the civil engineering field.
I have researched the average salary range for Civil Site Engineers in this region and industry.
I am open to negotiation based on the overall compensation package offered by the company.
I am looking for a salary that aligns w...
Mohamed Adam
(1 Question)
- Q1. Abt work Experience?
Civil Foreman Interview Questions & Answers
Aparna Constructions and Estates
Anonymous
posted on 26 Jan 2025
(1 Question)
- Q1. My experience & my qualification &my knowledge
(1 Question)
- Q1. What is your work experience
- Ans.
I have over 10 years of experience in civil engineering, managing various construction projects.
Managed construction projects from start to finish
Coordinated with architects, engineers, and contractors
Ensured projects were completed on time and within budget
Handled permits, inspections, and regulatory compliance
Implemented safety protocols and quality control measures
Senior Civil Engineer Interview Questions & Answers
Cushman & Wakefield
D RAHIM
posted on 24 Aug 2024
(1 Question)
- Q1. About your self
I applied via Referral and was interviewed in Dec 2023. There were 2 interview rounds.
Quality control and waste management
Maths reasoning and core subjects
Interview Preparation Tips
- RCC
(2 Questions)
- Q1. Tell me about your experience?
- Q2. What salary you expect from us ?
TSN INFRASTRUCTURE Interview FAQs
Tell us how to improve this page.
Interview Questions for Popular Designations
- Civil Site Engineer Interview Questions
- Civil Execution Engineer Interview Questions
- Site Execution Engineer Interview Questions
- Civil Site Supervisor Interview Questions
- Senior Civil Site Engineer Interview Questions
- Civil Engineer Interview Questions
- Civil Site Engineer & Site Incharge Interview Questions
- Junior Engineer Civil Interview Questions
- Show more
TSN INFRASTRUCTURE Civil Site Execution Engineer Interview Process
based on 1 interview
Interview experience
Interview Questions from Similar Companies
|
Project Manager
5
salaries
|  ₹4.5 L/yr - ₹9 L/yr |
|
Senior Accountant
4
salaries
| ₹4.2 L/yr - ₹4.2 L/yr |
|
Civil Site Engineer
4
salaries
| ₹4 L/yr - ₹5 L/yr |
|
Site Engineer
3
salaries
| ₹2.4 L/yr - ₹3.6 L/yr |
|
Quality Engineer
3
salaries
| ₹4.8 L/yr - ₹5.6 L/yr |
JLL
CBRE
Square Yards
NoBroker
- Home >
- Interviews >
- TSN INFRASTRUCTURE Interview Questions >
- TSN INFRASTRUCTURE Civil Site Execution Engineer Interview Questions
