Upload Button Icon Add office photos
Engaged Employer

i

This company page is being actively managed by Technosoft Engineering Projects Limited Team. If you also belong to the team, you can get access from here

Filter interviews by

Technosoft Engineering Projects Limited Senior Design Engineer Interview Questions and Answers

Updated 16 May 2023

Technosoft Engineering Projects Limited Senior Design Engineer Interview Experiences

1 interview found

Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed before May 2022. There were 5 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 

Aptitude test is quite similar to GATE CET etc like engineering questions based on all subjects from engineering. These questions are tricky ones. Calculator is allowed while giving test.

Round 3 - Assignment 

Depending upon for which department and which software you have come for the interview, one complex 3D model is given for all candidates to perform on that particular software to analyse his/her drawing reading skills.

Round 4 - Technical 

(5 Questions)

  • Q1. Basic welding information, like type of welding process and the symbols
  • Q2. Geometric dimensioning and tolerancing symbols and their use.
  • Ans. 

    Geometric dimensioning and tolerancing symbols are used to specify the dimensions, tolerances, and geometric characteristics of a part.

    • GD&T symbols are used to communicate design requirements and ensure proper fit, function, and interchangeability of parts.

    • Some common GD&T symbols include position, concentricity, perpendicularity, and flatness.

    • These symbols are typically placed on engineering drawings and provide preci...

  • Answered by AI
  • Q3. Questions related to your projects you have done in your previous jobs. What was your role in it and challenges you faced.
  • Ans. Make sure you know everything you have added in your CV.
  • Answered Anonymously
  • Q4. Software related questions.
  • Ans. Know one thing, this is service industry, everything here is software proficiency. So prepare well.
  • Answered Anonymously
  • Q5. Domain related questions.
  • Ans. Read basic for the domain you are going for.
  • Answered Anonymously
Round 5 - HR 

(3 Questions)

  • Q1. Tell me about yourself.
  • Q2. They will check if you are comfortable with flexible or project specific working timings.
  • Q3. They will check if you are comfortable for late night sittings for project deliverables.

Interview Preparation Tips

Topics to prepare for Technosoft Engineering Projects Limited Senior Design Engineer interview:
  • Solid Works
  • Solid Edge
  • Autodesk Inventor
  • AutoCAD
  • CAD
  • Welding
  • GdnT
  • UG NX
  • Unigraphics NX
  • NX
  • Design Calculations
  • Material Selection
Interview preparation tips for other job seekers - Make sure you complete the model test/assignment, all other things are simple. As this is the main requirement.

Interview questions from similar companies

Interview experience
5
Excellent
Difficulty level
Hard
Process Duration
-
Result
-

I applied via Recruitment Consulltant and was interviewed in Apr 2024. There was 1 interview round.

Round 1 - One-on-one 

(2 Questions)

  • Q1. Calculations for selecting the pneumatic cylinders, load withstand, bearings, gears, hydraulics and lm guides??
  • Ans. 

    Calculations for selecting components like pneumatic cylinders, bearings, gears, hydraulics, and lm guides involve considering load requirements, operating conditions, and safety factors.

    • Determine the load requirements for each component based on the application

    • Consider the operating conditions such as speed, temperature, and environment

    • Calculate the safety factors to ensure the components can withstand unexpected load...

  • Answered by AI
  • Q2. How do we select materials and on what basics??
  • Ans. 

    Materials selection is based on factors like mechanical properties, cost, availability, and environmental impact.

    • Consider the mechanical properties required for the application (e.g. strength, stiffness, toughness)

    • Evaluate the cost of materials and compare it to the budget for the project

    • Assess the availability of materials in the required quantity and timeframe

    • Take into account the environmental impact of the material

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - I'd appreciate it if you could learn technical calculations on selecting machinery technologies and they are expected to prove your design through calculation.
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - One-on-one 

(2 Questions)

  • Q1. What is the current unit?
  • Ans. 

    The current unit refers to the standard unit of measurement being used in a particular context.

    • The current unit can vary depending on the field or industry, such as inches in construction or Celsius in weather forecasting.

    • It is important to clarify the current unit to ensure accurate communication and data analysis.

    • Examples of current units include meters for length, kilograms for weight, and seconds for time.

  • Answered by AI
  • Q2. What is the resistance unit?
  • Ans. 

    The resistance unit is the ohm (Ω), which measures the opposition to the flow of electric current.

    • The resistance unit is measured in ohms (Ω)

    • It represents the opposition to the flow of electric current

    • Resistance can be calculated using Ohm's Law: R = V/I, where R is resistance, V is voltage, and I is current

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Group discussion
Interview experience
2
Poor
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. Motor selection for rotary table
  • Ans. 

    Motor selection for rotary table involves considering torque requirements, speed, size constraints, and control system compatibility.

    • Consider torque requirements for the rotary table based on load and acceleration/deceleration needs

    • Select a motor with appropriate speed capabilities to meet the desired rotation speed

    • Ensure the motor size fits within the constraints of the rotary table design

    • Check compatibility with the ...

  • Answered by AI
  • Q2. Pneumatic cylinder selection
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
4-6 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed before Nov 2023. There were 3 interview rounds.

Round 1 - Aptitude Test 

Average average average average price in india are you doing automation well.

Round 2 - Group Discussion 

It was very easy and I have cracked it very easily.

Round 3 - HR 

(2 Questions)

  • Q1. Introduce yourself
  • Q2. Explain your final Year project
  • Ans. 

    Designed a solar-powered irrigation system for sustainable agriculture

    • Researched solar panel efficiency and water distribution systems

    • Implemented sensors to monitor soil moisture levels

    • Developed a mobile app for remote monitoring and control

    • Conducted field tests to validate system performance

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare well for the all the round suggest technical round and round .

I applied via Recruitment Consulltant and was interviewed in Jan 2022. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. Basic Self introduction

Interview Preparation Tips

Interview preparation tips for other job seekers - Good knowledgeable person all over rockwell automation
Interview experience
3
Average
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Jul 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Need theoretical knowledge.
  • Q2. Need knowledge about work of your previous organisation

Interview Preparation Tips

Interview preparation tips for other job seekers - Please do not go if you want to work in Mechanical Design Department
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Nov 2023. There were 4 interview rounds.

Round 1 - One-on-one 

(1 Question)

  • Q1. I have been using blender for the past 2 years, so they asked how would I learn their 3d Software, i.e., 3Ds Max
Round 2 - Assignment 

Making an animated clip from a reference video provided.

Round 3 - One-on-one 

(1 Question)

  • Q1. How would I adjust here in acooperate coming from a gaming background with no real work overlap.
Round 4 - Technical 

(1 Question)

  • Q1. Questions about my process and skills in 3D modelling and Animation.
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. Basic questions
  • Q2. Experience about questions
Round 2 - HR 

(2 Questions)

  • Q1. Salary package negotiable
  • Q2. General information about you
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
-

I applied via Job Portal and was interviewed in Dec 2024. There were 2 interview rounds.

Round 1 - Technical 

(2 Questions)

  • Q1. Ehat is sheetmetal?
  • Ans. 

    Sheetmetal is a type of metal formed into thin and flat pieces, commonly used in manufacturing for various applications.

    • Sheetmetal is typically made from materials like aluminum, steel, or copper.

    • It is commonly used in industries such as automotive, aerospace, and construction.

    • Sheetmetal can be cut, bent, and formed into various shapes and sizes using tools like shears, brakes, and presses.

  • Answered by AI
  • Q2. Sheetmetal operation?
  • Ans. 

    Sheetmetal operation involves cutting, bending, and forming sheet metal to create various components.

    • Cutting: Using tools like shears, lasers, or plasma cutters to cut sheet metal into desired shapes.

    • Bending: Using press brakes to bend sheet metal at specific angles.

    • Forming: Using techniques like deep drawing or roll forming to shape sheet metal into complex geometries.

  • Answered by AI
Round 2 - One-on-one 

(1 Question)

  • Q1. Salary discussion

Technosoft Engineering Projects Limited Interview FAQs

How many rounds are there in Technosoft Engineering Projects Limited Senior Design Engineer interview?
Technosoft Engineering Projects Limited interview process usually has 5 rounds. The most common rounds in the Technosoft Engineering Projects Limited interview process are Resume Shortlist, Aptitude Test and Assignment.
How to prepare for Technosoft Engineering Projects Limited Senior Design Engineer interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at Technosoft Engineering Projects Limited. The most common topics and skills that interviewers at Technosoft Engineering Projects Limited expect are Sheet Metal Design, Solid Works, Machine Design, NPD and Home Appliances.
What are the top questions asked in Technosoft Engineering Projects Limited Senior Design Engineer interview?

Some of the top questions asked at the Technosoft Engineering Projects Limited Senior Design Engineer interview -

  1. Geometric dimensioning and tolerancing symbols and their u...read more
  2. Basic welding information, like type of welding process and the symb...read more
  3. They will check if you are comfortable for late night sittings for project deli...read more

Tell us how to improve this page.

Technosoft Engineering Projects Limited Senior Design Engineer Interview Process

based on 1 interview

Interview experience

3
  
Average
View more

Interview Questions from Similar Companies

Siemens Interview Questions
4.1
 • 425 Interviews
Johnson Controls Interview Questions
3.6
 • 262 Interviews
Falcon Autotech Interview Questions
3.9
 • 45 Interviews
Wipro PARI Interview Questions
3.3
 • 44 Interviews
View all
Technosoft Engineering Projects Limited Senior Design Engineer Salary
based on 96 salaries
₹5.1 L/yr - ₹10.8 L/yr
5% less than the average Senior Design Engineer Salary in India
View more details

Technosoft Engineering Projects Limited Senior Design Engineer Reviews and Ratings

based on 22 reviews

4.2/5

Rating in categories

3.8

Skill development

4.0

Work-life balance

3.6

Salary

4.2

Job security

4.2

Company culture

3.5

Promotions

3.9

Work satisfaction

Explore 22 Reviews and Ratings
Design Engineer
210 salaries
unlock blur

₹2.5 L/yr - ₹9 L/yr

Senior Design Engineer
96 salaries
unlock blur

₹5.1 L/yr - ₹10.8 L/yr

Mechanical Engg. Design
40 salaries
unlock blur

₹4.1 L/yr - ₹8 L/yr

Project Lead
25 salaries
unlock blur

₹5 L/yr - ₹15 L/yr

Team Lead
25 salaries
unlock blur

₹3.9 L/yr - ₹14 L/yr

Explore more salaries
Compare Technosoft Engineering Projects Limited with

Siemens

4.1
Compare

Schneider Electric

4.1
Compare

Johnson Controls

3.5
Compare

Honeywell Automation

3.8
Compare
Did you find this page helpful?
Yes No
write
Share an Interview