Upload Button Icon Add office photos

Filter interviews by

Technip Energies Apprentice Engineer Interview Questions and Answers

Updated 6 May 2022

Technip Energies Apprentice Engineer Interview Experiences

1 interview found

I applied via Walk-in and was interviewed before May 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. How to design exchanger
  • Ans. 

    Designing an exchanger involves determining the heat transfer area, fluid flow rates, and selecting appropriate materials.

    • Determine the heat transfer area required based on the heat duty and the overall heat transfer coefficient.

    • Calculate the fluid flow rates and pressure drops for both the hot and cold fluids.

    • Select appropriate materials based on the process conditions and compatibility with the fluids.

    • Consider factor...

  • Answered by AI
  • Q2. How to final OPOT of column.
  • Ans. 

    Final OPOT of a column can be achieved through proper planning and execution.

    • Ensure proper alignment and positioning of the column

    • Check for any defects or damages in the column

    • Ensure proper reinforcement and formwork

    • Pour concrete in stages and compact it properly

    • Allow sufficient time for curing

    • Perform necessary tests and inspections before finalizing OPOT

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Basic chemical engineering knowledge must

Skills evaluated in this interview

Interview questions from similar companies

I applied via Naukri.com and was interviewed before Nov 2019. There was 1 interview round.

Interview Questionnaire 

4 Questions

  • Q1. Basics related to piperack design
  • Q2. Design parameters for steel structure
  • Ans. 

    Design parameters for steel structure

    • Load capacity and distribution

    • Material strength and durability

    • Environmental factors such as wind and seismic activity

    • Connection details and joint design

    • Fire resistance and protection measures

  • Answered by AI
  • Q3. Number of years exposure to staad
  • Ans. 

    I have 5 years of exposure to STAAD software.

    • I have used STAAD for various structural analysis and design projects.

    • I am proficient in using STAAD for modeling, analysis, and design of steel and concrete structures.

    • I have experience in using STAAD for seismic analysis and design of structures.

    • I have also used STAAD for foundation design and analysis.

    • I keep myself updated with the latest versions and features of STAAD so

  • Answered by AI
  • Q4. Grating design and deflection limits

Interview Preparation Tips

Interview preparation tips for other job seekers - Be positive & confident

I applied via Naukri.com and was interviewed in Oct 2020. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. The HR round was very pathetic. Sreethala took my HR round.

Interview Preparation Tips

Interview preparation tips for other job seekers - Please don't waste your precious time in giving the interview for Baker Hughes, Powai
Mumbai location. They will take all the interview rounds. The HR will ask you to submit all documents and last moment they will cancel your candidature without giving you any specific reason.
Interview experience
2
Poor
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via Referral and was interviewed in Sep 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. 1. Safety valve types and selection criteria 2. Thermowell Design concept 3. Diff. Pressure Type Flow meter concept and criteria 4. Cable construction details 5. Hook-Ups details
  • Q2. 1. Installation details 2. Flowmeter straigth lengths requirement

Interview Preparation Tips

Interview preparation tips for other job seekers - On which things you worked on , all basics and details things shall be clear.
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed before Apr 2023. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. PAST EXPERIENCE QUESTIONS

Interview Preparation Tips

Topics to prepare for L&T Energy Hydrocarbon Senior Engineer interview:
  • Piping
Interview preparation tips for other job seekers - GET DETAILS OF CODES AND STANDARDS YOU USED IN WORK

I applied via Walk-in and was interviewed before Apr 2020. There was 1 interview round.

Interview Questionnaire 

6 Questions

  • Q1. Can you explain Man day
  • Q2. Can you explain manpower mobilization.
  • Ans. 

    Manpower mobilization refers to the process of deploying and managing personnel for a specific project or task.

    • Identifying the required personnel for a project

    • Recruiting and hiring personnel

    • Training and orienting personnel to the project

    • Assigning roles and responsibilities to personnel

    • Managing personnel performance and productivity

    • Ensuring compliance with labor laws and regulations

    • Examples include mobilizing a construc...

  • Answered by AI
  • Q3. How to cost control in project
  • Ans. 

    Cost control in project can be achieved through effective planning, monitoring and controlling of project expenses.

    • Create a detailed project budget and stick to it

    • Track expenses regularly and adjust budget as needed

    • Identify and eliminate unnecessary expenses

    • Negotiate with vendors for better pricing

    • Implement cost-saving measures without compromising quality

    • Use project management tools to monitor expenses and progress

    • Reg...

  • Answered by AI
  • Q4. Can you explain how to handle clinent
  • Ans. 

    Handling clients requires effective communication, understanding their needs, and providing timely solutions.

    • Listen actively to their concerns and requirements

    • Communicate clearly and professionally

    • Provide timely updates and solutions

    • Build a strong relationship based on trust and respect

    • Be proactive in identifying and addressing potential issues

    • Ensure customer satisfaction by going above and beyond expectations

  • Answered by AI
  • Q5. Flow chart for manpower mobilization
  • Ans. 

    Manpower mobilization flow chart involves identifying needs, planning, recruitment, training, and deployment.

    • Identify the need for manpower

    • Plan the recruitment process

    • Source and screen candidates

    • Conduct interviews and assessments

    • Select and hire candidates

    • Provide training and orientation

    • Deploy manpower to required locations

  • Answered by AI
  • Q6. Prepared organisation chat for project handling

Interview Preparation Tips

Interview preparation tips for other job seekers - Please see all questions
Interview experience
3
Average
Difficulty level
-
Process Duration
-
Result
No response
Round 1 - Technical 

(5 Questions)

  • Q1. About current projects. And more about seismic/ wind loads
  • Q2. How to perform RSM method ?
  • Ans. 

    Response Surface Methodology (RSM) is a statistical technique used to model and analyze the relationship between a response variable and multiple input variables.

    • Design a set of experiments based on a factorial design

    • Collect data from the experiments

    • Fit a regression model to the data

    • Analyze the model to determine optimal input settings for the response variable

  • Answered by AI
  • Q3. Soil test report
  • Q4. Foundation uplift
  • Q5. Connection design
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed before Sep 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Which column takes more load short or Long Column
  • Q2. What kind of pressures will impose on the water tank walls during seismic

Interview Preparation Tips

Interview preparation tips for other job seekers - Be prepared with fundamentals
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
-

I was interviewed in Apr 2024.

Round 1 - One-on-one 

(2 Questions)

  • Q1. Control Valve sizing
  • Q2. Flowmeter selection
Round 2 - HR 

(2 Questions)

  • Q1. Reason for shifting
  • Ans. 

    I shifted to pursue new opportunities for growth and development in my career.

    • Seeking new challenges and responsibilities

    • Exploring different industries or technologies

    • Relocation for personal reasons or family commitments

  • Answered by AI
  • Q2. Expected salary

Interview Preparation Tips

Round: Resume Shortlist
Experience: I was not able to get shortlisted as i was not fitting there criteria.
But i requested my sir so i was able to sit for the interview process.
Tips: Dont loose hope n try hard every time u fail



General Tips: Try to get a job which u like to do.
Dont just do the job just becoz u r getting it.
Be true in ur interview n try to exolain with an example.
Skill Tips: Start preparing for quant from the start of the last yr.
Be prepared with ur subject knowledge.
Do try to get only certified courses.
Skills: Quantitative skills, Technical Skills
College Name: Vivekanand education society's institute of technology
Motivation: I always wanted to get placed in a core company.
So i opted for the best one in my field.
Funny Moments: I was offer a biscuit n it was onlybone buiscuit in full plate but i didnt took it.
And i still dont know i hav done it good or bad.

Technip Energies Interview FAQs

How many rounds are there in Technip Energies Apprentice Engineer interview?
Technip Energies interview process usually has 2 rounds. The most common rounds in the Technip Energies interview process are Resume Shortlist and Technical.
What are the top questions asked in Technip Energies Apprentice Engineer interview?

Some of the top questions asked at the Technip Energies Apprentice Engineer interview -

  1. How to final OPOT of colu...read more
  2. How to design exchan...read more

Tell us how to improve this page.

Interview Questions from Similar Companies

L&T Construction Interview Questions
4.0
 • 744 Interviews
Saint-Gobain Interview Questions
4.0
 • 172 Interviews
AECOM Interview Questions
4.2
 • 115 Interviews
Worley Interview Questions
4.1
 • 111 Interviews
AtkinsRealis Interview Questions
4.0
 • 87 Interviews
Bechtel Interview Questions
4.0
 • 68 Interviews
Wood Group Interview Questions
3.8
 • 59 Interviews
View all
Process Engineer
127 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Engineer
117 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Principal Engineer
108 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Piping Designer
99 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Deputy Manager
92 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Technip Energies with

L&T Energy Hydrocarbon

3.8
Compare

Baker Hughes

4.0
Compare

McDermott International

4.3
Compare

Saipem

4.1
Compare
Did you find this page helpful?
Yes No
write
Share an Interview